[PATCH 03/10] gpio: samsung: move gpio-samsung driver back to platform code

[k.kozlowski@samsung.com (Krzysztof Kozlowski)]

On 26.11.2015 01:06, Arnd Bergmann wrote:
> The gpio-samsung driver is special in the sense that it
> interacts directly in multiple ways with the legacy platform
> code for the s3c24xx and s3c64xx platforms. In contrast,
> all devicetree based machines for Samsung, including the
> ones on those two SoC families use a different driver.
> 
> The header files that define the interface between the platform
> code and the gpio driver are not visible when building a
> kernel for ARCH_MULTIPLATFORM, which prevents us from
> turning on this option for s3c64xx.
> 
> To work around this, we now move the driver back into platform
> code, from where it was originally moved to as part of commit
> 1b39d5f2cc5c28 ("gpio/samsung: gpio-samsung.c to support
> Samsung GPIOs").
> 
> The long-term plan for this driver would be to remove it
> entirely, after all Samsung machines have been converted
> over to boot from DT, but there is currently no timeline
> for when that might happen.
> 
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
>  arch/arm/plat-samsung/Kconfig                          | 3 +++
>  arch/arm/plat-samsung/Makefile                         | 2 ++
>  {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c | 0
>  drivers/gpio/Kconfig                                   | 7 -------
>  drivers/gpio/Makefile                                  | 1 -
>  5 files changed, 5 insertions(+), 8 deletions(-)
>  rename {drivers/gpio => arch/arm/plat-samsung}/gpio-samsung.c (100%)
> 
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 57729b915003..83697414bfa0 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -294,6 +294,9 @@ config SAMSUNG_WDT_RESET
>  	  Compile support for system restart by triggering watchdog reset.
>  	  Used on SoCs that do not provide dedicated reset control.
>  
> +config GPIO_SAMSUNG
> +	def_bool SAMSUNG_ATAGS
> +

I think this should be put inside "if SAMSUNG_ATAGS" section, just
before SAMSUNG_PM_GPIO (with default=y?). It makes more consistent with
rest of the options depending on ATAGS.

Rest seems fine:
Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>

Best regards,
Krzysztof