From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 05/21] arm64: KVM: Implement timer save/restore
Date: Tue, 01 Dec 2015 11:34:41 +0000 [thread overview]
Message-ID: <565D85D1.6060908@arm.com> (raw)
In-Reply-To: <20151130195955.GE11704@cbox>
On 30/11/15 19:59, Christoffer Dall wrote:
> On Fri, Nov 27, 2015 at 06:49:59PM +0000, Marc Zyngier wrote:
>> Implement the timer save restore as a direct translation of
>> the assembly code version.
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
>> ---
>> arch/arm64/kvm/hyp/Makefile | 1 +
>> arch/arm64/kvm/hyp/hyp.h | 3 ++
>> arch/arm64/kvm/hyp/timer-sr.c | 71 ++++++++++++++++++++++++++++++++++++
>> include/clocksource/arm_arch_timer.h | 6 +++
>> 4 files changed, 81 insertions(+)
>> create mode 100644 arch/arm64/kvm/hyp/timer-sr.c
>>
>> diff --git a/arch/arm64/kvm/hyp/Makefile b/arch/arm64/kvm/hyp/Makefile
>> index d1e38ce..455dc0a 100644
>> --- a/arch/arm64/kvm/hyp/Makefile
>> +++ b/arch/arm64/kvm/hyp/Makefile
>> @@ -4,3 +4,4 @@
>>
>> obj-$(CONFIG_KVM_ARM_HOST) += vgic-v2-sr.o
>> obj-$(CONFIG_KVM_ARM_HOST) += vgic-v3-sr.o
>> +obj-$(CONFIG_KVM_ARM_HOST) += timer-sr.o
>> diff --git a/arch/arm64/kvm/hyp/hyp.h b/arch/arm64/kvm/hyp/hyp.h
>> index a31cb6e..86aa5a2 100644
>> --- a/arch/arm64/kvm/hyp/hyp.h
>> +++ b/arch/arm64/kvm/hyp/hyp.h
>> @@ -33,5 +33,8 @@ void __vgic_v2_restore_state(struct kvm_vcpu *vcpu);
>> void __vgic_v3_save_state(struct kvm_vcpu *vcpu);
>> void __vgic_v3_restore_state(struct kvm_vcpu *vcpu);
>>
>> +void __timer_save_state(struct kvm_vcpu *vcpu);
>> +void __timer_restore_state(struct kvm_vcpu *vcpu);
>> +
>> #endif /* __ARM64_KVM_HYP_H__ */
>>
>> diff --git a/arch/arm64/kvm/hyp/timer-sr.c b/arch/arm64/kvm/hyp/timer-sr.c
>> new file mode 100644
>> index 0000000..8e2209c
>> --- /dev/null
>> +++ b/arch/arm64/kvm/hyp/timer-sr.c
>> @@ -0,0 +1,71 @@
>> +/*
>> + * Copyright (C) 2012-2015 - ARM Ltd
>> + * Author: Marc Zyngier <marc.zyngier@arm.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
>> + */
>> +
>> +#include <clocksource/arm_arch_timer.h>
>> +#include <linux/compiler.h>
>> +#include <linux/kvm_host.h>
>> +
>> +#include <asm/kvm_mmu.h>
>> +
>> +#include "hyp.h"
>> +
>> +/* vcpu is already in the HYP VA space */
>> +void __hyp_text __timer_save_state(struct kvm_vcpu *vcpu)
>> +{
>> + struct kvm *kvm = kern_hyp_va(vcpu->kvm);
>> + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
>> +
>> + if (kvm->arch.timer.enabled) {
>> + timer->cntv_ctl = read_sysreg(cntv_ctl_el0);
>> + isb();
>> + timer->cntv_cval = read_sysreg(cntv_cval_el0);
>> + }
>> +
>> + /* Disable the virtual timer */
>> + write_sysreg(0, cntv_ctl_el0);
>> +
>> + /* Allow physical timer/counter access for the host */
>> + write_sysreg((read_sysreg(cnthctl_el2) | CNTHCTL_EL1PCTEN |
>> + CNTHCTL_EL1PCEN),
>> + cnthctl_el2);
>
> nit: again I probably prefer reading cnthctl_el2 into a variable, modify
> the bits and write it back, but it's no big deal.
Sure.
>> +
>> + /* Clear cntvoff for the host */
>> + write_sysreg(0, cntvoff_el2);
>
> why do we do this when we've just disabled the timer?
Because the host does use CNTVCT_EL0 (see the VDSO code), and you don't
want time to go backward over there...
>> +}
>> +
>> +void __hyp_text __timer_restore_state(struct kvm_vcpu *vcpu)
>> +{
>> + struct kvm *kvm = kern_hyp_va(vcpu->kvm);
>> + struct arch_timer_cpu *timer = &vcpu->arch.timer_cpu;
>> + u64 val;
>> +
>> + /*
>> + * Disallow physical timer access for the guest
>> + * Physical counter access is allowed
>> + */
>> + val = read_sysreg(cnthctl_el2);
>> + val &= ~CNTHCTL_EL1PCEN;
>> + val |= CNTHCTL_EL1PCTEN;
>> + write_sysreg(val, cnthctl_el2);
>> +
>> + if (kvm->arch.timer.enabled) {
>> + write_sysreg(kvm->arch.timer.cntvoff, cntvoff_el2);
>> + write_sysreg(timer->cntv_cval, cntv_cval_el0);
>> + isb();
>> + write_sysreg(timer->cntv_ctl, cntv_ctl_el0);
>> + }
>> +}
>> diff --git a/include/clocksource/arm_arch_timer.h b/include/clocksource/arm_arch_timer.h
>> index 9916d0e..25d0914 100644
>> --- a/include/clocksource/arm_arch_timer.h
>> +++ b/include/clocksource/arm_arch_timer.h
>> @@ -23,6 +23,12 @@
>> #define ARCH_TIMER_CTRL_IT_MASK (1 << 1)
>> #define ARCH_TIMER_CTRL_IT_STAT (1 << 2)
>>
>> +#define CNTHCTL_EL1PCTEN (1 << 0)
>> +#define CNTHCTL_EL1PCEN (1 << 1)
>> +#define CNTHCTL_EVNTEN (1 << 2)
>> +#define CNTHCTL_EVNTDIR (1 << 3)
>> +#define CNTHCTL_EVNTI (0xF << 4)
>> +
>> enum arch_timer_reg {
>> ARCH_TIMER_REG_CTRL,
>> ARCH_TIMER_REG_TVAL,
>> --
>> 2.1.4
>>
>
> Otherwise this looks good.
Thanks,
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2015-12-01 11:34 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-27 18:49 [PATCH v2 00/21] arm64: KVM: world switch in C Marc Zyngier
2015-11-27 18:49 ` [PATCH v2 01/21] arm64: Add macros to read/write system registers Marc Zyngier
2015-11-30 20:00 ` Christoffer Dall
2015-11-27 18:49 ` [PATCH v2 02/21] arm64: KVM: Add a HYP-specific header file Marc Zyngier
2015-11-30 20:00 ` Christoffer Dall
2015-12-01 11:41 ` Marc Zyngier
2015-12-01 11:47 ` Christoffer Dall
2015-11-27 18:49 ` [PATCH v2 03/21] arm64: KVM: Implement vgic-v2 save/restore Marc Zyngier
2015-11-30 20:00 ` Christoffer Dall
2015-12-01 11:39 ` Marc Zyngier
2015-11-27 18:49 ` [PATCH v2 04/21] arm64: KVM: Implement vgic-v3 save/restore Marc Zyngier
2015-11-30 9:59 ` Alex Bennée
2015-11-30 10:43 ` Marc Zyngier
2015-11-30 19:50 ` Christoffer Dall
2015-12-01 11:32 ` Marc Zyngier
2015-12-01 11:44 ` Christoffer Dall
2015-12-01 11:50 ` Christoffer Dall
2015-12-01 11:57 ` Marc Zyngier
2015-12-01 12:24 ` Christoffer Dall
2015-12-01 12:49 ` Marc Zyngier
2015-12-01 11:54 ` Marc Zyngier
2015-11-27 18:49 ` [PATCH v2 05/21] arm64: KVM: Implement timer save/restore Marc Zyngier
2015-11-30 19:59 ` Christoffer Dall
2015-12-01 11:34 ` Marc Zyngier [this message]
2015-11-27 18:50 ` [PATCH v2 06/21] arm64: KVM: Implement system register save/restore Marc Zyngier
2015-12-01 15:53 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 07/21] arm64: KVM: Implement 32bit " Marc Zyngier
2015-12-01 15:52 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 08/21] arm64: KVM: Implement debug save/restore Marc Zyngier
2015-11-30 12:00 ` Alex Bennée
2015-11-30 12:24 ` Marc Zyngier
2015-12-01 12:56 ` Christoffer Dall
2015-12-01 13:06 ` Marc Zyngier
2015-12-01 13:19 ` Alex Bennée
2015-12-01 13:34 ` Marc Zyngier
2015-12-01 14:47 ` Christoffer Dall
2015-12-01 14:56 ` Christoffer Dall
2015-12-01 15:01 ` Marc Zyngier
2015-12-01 15:41 ` Christoffer Dall
2015-12-01 18:34 ` Marc Zyngier
2015-11-27 18:50 ` [PATCH v2 09/21] arm64: KVM: Implement guest entry Marc Zyngier
2015-12-01 15:29 ` Christoffer Dall
2015-12-01 18:41 ` Marc Zyngier
2015-11-27 18:50 ` [PATCH v2 10/21] arm64: KVM: Add patchable function selector Marc Zyngier
2015-12-01 15:39 ` Christoffer Dall
2015-12-01 18:51 ` Marc Zyngier
2015-12-02 9:27 ` Christoffer Dall
2015-12-02 9:47 ` Marc Zyngier
2015-12-02 11:53 ` Christoffer Dall
2015-12-02 13:19 ` Marc Zyngier
2015-12-02 16:19 ` Christoffer Dall
2015-12-02 22:34 ` Andrew Jones
2015-12-03 8:18 ` Marc Zyngier
2015-11-27 18:50 ` [PATCH v2 11/21] arm64: KVM: Implement the core world switch Marc Zyngier
2015-12-01 15:55 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 12/21] arm64: KVM: Implement fpsimd save/restore Marc Zyngier
2015-12-02 11:53 ` Christoffer Dall
2015-12-02 15:29 ` Marc Zyngier
2015-12-02 16:19 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 13/21] arm64: KVM: Implement TLB handling Marc Zyngier
2015-12-02 11:53 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 14/21] arm64: KVM: HYP mode entry points Marc Zyngier
2015-12-02 11:53 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 15/21] arm64: KVM: Add panic handling Marc Zyngier
2015-12-02 11:53 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 16/21] arm64: KVM: Add compatibility aliases Marc Zyngier
2015-12-02 11:49 ` Christoffer Dall
2015-12-02 15:23 ` Marc Zyngier
2015-11-27 18:50 ` [PATCH v2 17/21] arm64: KVM: Map the kernel RO section into HYP Marc Zyngier
2015-12-02 11:49 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 18/21] arm64: KVM: Move away from the assembly version of the world switch Marc Zyngier
2015-12-02 11:49 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 19/21] arm64: KVM: Turn system register numbers to an enum Marc Zyngier
2015-12-02 11:51 ` Christoffer Dall
2015-12-02 15:26 ` Marc Zyngier
2015-11-27 18:50 ` [PATCH v2 20/21] arm64: KVM: Cleanup asm-offset.c Marc Zyngier
2015-12-02 11:51 ` Christoffer Dall
2015-11-27 18:50 ` [PATCH v2 21/21] arm64: KVM: Remove weak attributes Marc Zyngier
2015-12-02 11:47 ` Christoffer Dall
2015-12-02 15:21 ` Marc Zyngier
2015-12-02 16:21 ` Christoffer Dall
2015-12-02 17:52 ` Marc Zyngier
2015-11-30 20:33 ` [PATCH v2 00/21] arm64: KVM: world switch in C Christoffer Dall
2015-12-01 3:19 ` Mario Smarduch
2015-12-01 9:58 ` Marc Zyngier
2015-12-01 12:00 ` Christoffer Dall
2015-12-01 17:51 ` Marc Zyngier
2015-12-01 19:34 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=565D85D1.6060908@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).