From mboxrd@z Thu Jan 1 00:00:00 1970 From: mark.yao@rock-chips.com (Mark yao) Date: Thu, 03 Dec 2015 09:54:56 +0800 Subject: [RFC PATCH 7/9] drm/rockchip: force enable vop when do mode setting In-Reply-To: <20151202221710.GB10243@phenom.ffwll.local> References: <1448940391-23333-1-git-send-email-mark.yao@rock-chips.com> <1448940721-23488-1-git-send-email-mark.yao@rock-chips.com> <20151202165536.GA14019@ulmo> <20151202221710.GB10243@phenom.ffwll.local> Message-ID: <565FA0F0.1030306@rock-chips.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 2015?12?03? 06:17, Daniel Vetter wrote: > On Wed, Dec 02, 2015 at 05:55:36PM +0100, Thierry Reding wrote: >> On Tue, Dec 01, 2015 at 11:32:01AM +0800, Mark Yao wrote: >>> When do mode setting, mean that we want to enable display output, >>> but sometimes, vop_crtc_enable is after mode_set, we can't allow >>> that, so force enable vop in mode setting. >>> >>> Signed-off-by: Mark Yao >>> --- >>> drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 1 + >>> 1 file changed, 1 insertion(+) >>> >>> diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c >>> index c65b454..7c07537 100644 >>> --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c >>> +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c >>> @@ -1110,6 +1110,7 @@ static void vop_crtc_mode_set_nofb(struct drm_crtc *crtc) >>> u16 vact_end = vact_st + vdisplay; >>> uint32_t val; >>> >>> + vop_crtc_enable(crtc); >>> /* >>> * If dclk rate is zero, mean that scanout is stop, >>> * we don't need wait any more. >> Have you considered simply moving everything into ->enable()? That's >> what I did for Tegra, for much the same reasons that you gave in the >> commit message. Doing so gives you a much simpler call graph. Really >> the only thing you need to do is move around the code, and perhaps a >> different way to get ahold of the display mode, but you can use the >> Tegra driver as a reference for how to do that. > Yeah if writing mode related registers requires the thing to be on on your > hw then you can't use the ->mode_set hooks. Those are explicitly called > when everything is off (not just sometimes, at least with atomic helpers). > > Like Thierry said the recommendation is to just shovel that code into > ->enable hooks. ->mode_set_nofb is mostly there to support easier > transition for drivers which started with the legacy crtc helpers. > -Daniel Good, thanks, actually it solve my confusion. -- ?ark Yao