From mboxrd@z Thu Jan 1 00:00:00 1970 From: kapilh@broadcom.com (Kapil Hali) Date: Sat, 5 Dec 2015 17:26:08 +0530 Subject: [PATCH v5 2/5] ARM: BCM: Clean up SMP support for Broadcom Kona In-Reply-To: <56621CA3.3090903@gmail.com> References: <1449260611-24417-1-git-send-email-kapilh@broadcom.com> <1449260611-24417-3-git-send-email-kapilh@broadcom.com> <56621CA3.3090903@gmail.com> Message-ID: <5662D0D8.1020004@broadcom.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Florian, On 12/5/2015 4:37 AM, Florian Fainelli wrote: > On 04/12/15 12:23, Kapil Hali wrote: >> These changes cleans up SMP implementaion for Broadcom's >> Kona SoC which are required for handling SMP for iProc >> family of SoCs at a single place for BCM NSP and BCM Kona. >> >> Signed-off-by: Kapil Hali >> --- >> arch/arm/boot/dts/bcm11351.dtsi | 2 +- >> arch/arm/boot/dts/bcm21664.dtsi | 2 +- >> arch/arm/mach-bcm/kona_smp.c | 82 +++++++++++++++++++++++++++-------------- >> 3 files changed, 56 insertions(+), 30 deletions(-) >> >> diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi >> index 2ddaa51..3dc7a8c 100644 >> --- a/arch/arm/boot/dts/bcm11351.dtsi >> +++ b/arch/arm/boot/dts/bcm11351.dtsi >> @@ -31,7 +31,6 @@ >> #address-cells = <1>; >> #size-cells = <0>; >> enable-method = "brcm,bcm11351-cpu-method"; >> - secondary-boot-reg = <0x3500417c>; > > I would expect the 'enable-method' to be moved as well to be consistent > with what you are adding for NSP later on. > Right, it is updated in the new patch set. >> >> cpu0: cpu at 0 { >> device_type = "cpu"; >> @@ -42,6 +41,7 @@ >> cpu1: cpu at 1 { >> device_type = "cpu"; >> compatible = "arm,cortex-a9"; >> + secondary-boot-reg = <0x3500417c>; >> reg = <1>; >> }; Thanks, Kapil