From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 02/21] KVM: ARM64: Define PMU data structure for each vcpu
Date: Mon, 07 Dec 2015 15:05:10 +0000 [thread overview]
Message-ID: <5665A026.8000802@arm.com> (raw)
In-Reply-To: <1449123091-20252-3-git-send-email-zhaoshenglong@huawei.com>
On 03/12/15 06:11, Shannon Zhao wrote:
> From: Shannon Zhao <shannon.zhao@linaro.org>
>
> Here we plan to support virtual PMU for guest by full software
> emulation, so define some basic structs and functions preparing for
> futher steps. Define struct kvm_pmc for performance monitor counter and
> struct kvm_pmu for performance monitor unit for each vcpu. According to
> ARMv8 spec, the PMU contains at most 32(ARMV8_MAX_COUNTERS) counters.
>
> Since this only supports ARM64 (or PMUv3), add a separate config symbol
> for it.
>
> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
> ---
> arch/arm64/include/asm/kvm_host.h | 2 ++
> arch/arm64/kvm/Kconfig | 8 ++++++++
> include/kvm/arm_pmu.h | 41 +++++++++++++++++++++++++++++++++++++++
> 3 files changed, 51 insertions(+)
> create mode 100644 include/kvm/arm_pmu.h
>
> diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
> index a35ce72..42e15bb 100644
> --- a/arch/arm64/include/asm/kvm_host.h
> +++ b/arch/arm64/include/asm/kvm_host.h
> @@ -37,6 +37,7 @@
>
> #include <kvm/arm_vgic.h>
> #include <kvm/arm_arch_timer.h>
> +#include <kvm/arm_pmu.h>
>
> #define KVM_MAX_VCPUS VGIC_V3_MAX_CPUS
>
> @@ -132,6 +133,7 @@ struct kvm_vcpu_arch {
> /* VGIC state */
> struct vgic_cpu vgic_cpu;
> struct arch_timer_cpu timer_cpu;
> + struct kvm_pmu pmu;
>
> /*
> * Anything that is not used directly from assembly code goes
> diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
> index a5272c0..66da9a2 100644
> --- a/arch/arm64/kvm/Kconfig
> +++ b/arch/arm64/kvm/Kconfig
> @@ -36,6 +36,7 @@ config KVM
> select HAVE_KVM_EVENTFD
> select HAVE_KVM_IRQFD
> select KVM_ARM_VGIC_V3
> + select KVM_ARM_PMU
> ---help---
> Support hosting virtualized guest machines.
> We don't support KVM with 16K page tables yet, due to the multiple
> @@ -48,6 +49,13 @@ config KVM_ARM_HOST
> ---help---
> Provides host support for ARM processors.
>
> +config KVM_ARM_PMU
> + bool
> + depends on KVM_ARM_HOST && HW_PERF_EVENTS
> + ---help---
> + Adds support for a virtual Performance Monitoring Unit (PMU) in
> + virtual machines.
> +
> source drivers/vhost/Kconfig
>
> endif # VIRTUALIZATION
> diff --git a/include/kvm/arm_pmu.h b/include/kvm/arm_pmu.h
> new file mode 100644
> index 0000000..0c13470
> --- /dev/null
> +++ b/include/kvm/arm_pmu.h
> @@ -0,0 +1,41 @@
> +/*
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Shannon Zhao <shannon.zhao@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef __ASM_ARM_KVM_PMU_H
> +#define __ASM_ARM_KVM_PMU_H
> +
> +#include <linux/perf_event.h>
> +#ifdef CONFIG_KVM_ARM_PMU
> +#include <asm/pmu.h>
> +#endif
> +
> +struct kvm_pmc {
> + u8 idx;/* index into the pmu->pmc array */
> + struct perf_event *perf_event;
> + struct kvm_vcpu *vcpu;
Why do you need this? If you have the pointer to a kvm_pmc structure, it
is very cheap to compute the address of the vcpu:
static inline kvm_vcpu *kvm_pmc_to_vcpu(struct kvm_pmc *pmc)
{
struct kvm_pmu *pmu;
pmc -= pmc->idx;
pmu = container_of(pmc, struct kvm_pmu, pmc);
return container_of(pmu, struct kvm_vcpu, pmu);
}
All of which the compiler will happily optimize for you.
> + u64 bitmask;
Looking at the code in pmu.c, there seem to be some confusion between
u64 and unsigned long (see kvm_pmu_get_counter_value). Please make sure
this is uniform.
> +};
> +
> +struct kvm_pmu {
> +#ifdef CONFIG_KVM_ARM_PMU
> + /* PMU IRQ Number per VCPU */
> + int irq_num;
> + struct kvm_pmc pmc[ARMV8_MAX_COUNTERS];
> +#endif
> +};
> +
> +#endif
>
Thanks,
M.
--
Jazz is not dead. It just smells funny...
next prev parent reply other threads:[~2015-12-07 15:05 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-03 6:11 [PATCH v5 00/21] KVM: ARM64: Add guest PMU support Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 01/21] ARM64: Move PMU register related defines to asm/pmu.h Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 02/21] KVM: ARM64: Define PMU data structure for each vcpu Shannon Zhao
2015-12-07 15:05 ` Marc Zyngier [this message]
2015-12-07 16:42 ` Marc Zyngier
2015-12-03 6:11 ` [PATCH v5 03/21] KVM: ARM64: Add offset defines for PMU registers Shannon Zhao
2015-12-07 14:06 ` Marc Zyngier
2015-12-07 14:31 ` Shannon Zhao
2015-12-07 14:55 ` Marc Zyngier
2015-12-08 8:09 ` Shannon Zhao
2015-12-08 9:02 ` Marc Zyngier
2015-12-03 6:11 ` [PATCH v5 04/21] KVM: ARM64: Add reset and access handlers for PMCR_EL0 register Shannon Zhao
2015-12-07 13:28 ` Marc Zyngier
2015-12-03 6:11 ` [PATCH v5 05/21] KVM: ARM64: Add reset and access handlers for PMSELR register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 06/21] KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1 register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 07/21] KVM: ARM64: PMU: Add perf event map and introduce perf event creating function Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 08/21] KVM: ARM64: Add reset and access handlers for PMXEVTYPER register Shannon Zhao
2015-12-07 13:38 ` Marc Zyngier
2015-12-03 6:11 ` [PATCH v5 09/21] KVM: ARM64: Add reset and access handlers for PMXEVCNTR register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 10/21] KVM: ARM64: Add reset and access handlers for PMCCNTR register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 11/21] KVM: ARM64: Add reset and access handlers for PMCNTENSET and PMCNTENCLR register Shannon Zhao
2015-12-07 13:42 ` Marc Zyngier
2015-12-03 6:11 ` [PATCH v5 12/21] KVM: ARM64: Add reset and access handlers for PMINTENSET and PMINTENCLR register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 13/21] KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 14/21] KVM: ARM64: Add reset and access handlers for PMUSERENR register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 15/21] KVM: ARM64: Add reset and access handlers for PMSWINC register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 16/21] KVM: ARM64: Add access handlers for PMEVCNTRn and PMEVTYPERn register Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 17/21] KVM: ARM64: Add helper to handle PMCR register bits Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 18/21] KVM: ARM64: Add PMU overflow interrupt routing Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 19/21] KVM: ARM64: Reset PMU state when resetting vcpu Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 20/21] KVM: ARM64: Free perf event of PMU when destroying vcpu Shannon Zhao
2015-12-03 6:11 ` [PATCH v5 21/21] KVM: ARM64: Add a new kvm ARM PMU device Shannon Zhao
2015-12-07 13:56 ` Marc Zyngier
2015-12-07 14:37 ` Shannon Zhao
2015-12-07 15:06 ` Marc Zyngier
2015-12-07 14:11 ` [PATCH v5 00/21] KVM: ARM64: Add guest PMU support Marc Zyngier
2015-12-07 14:47 ` Shannon Zhao
2015-12-07 15:09 ` Marc Zyngier
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5665A026.8000802@arm.com \
--to=marc.zyngier@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).