[PATCH 0/3] pinmux support for Broadcom NSP SOC

[rjui@broadcom.com (Ray Jui)]

Hi,

On 11/20/2015 9:55 AM, Yendapally Reddy Dhananjaya Reddy wrote:
> This patchset contains the pinmux support for the Broadcom's
> Northstar Plus (NSP) SOC.
>
> The first patch provides the documentation details and the
> second patch contains the driver details. The third patch
> contains the enable method.
>
> This patchset has been tested on NSP bcm958625HR board.
> This patchset is based on v4.4.0-rc1 and is available from github
> repo: https://github.com/Broadcom/cygnus-linux.git
> branch: nsp-pinmux-v1
>
> Yendapally Reddy Dhananjaya Reddy (3):
>    pinctrl: Broadcom NSP pinctrl device tree bindings
>    pinctrl: nsp: add pinmux driver support for Broadcom NSP SoC
>    ARM: dts: enable pinctrl for Broadcom NSP
>
>   .../bindings/pinctrl/brcm,nsp-pinmux.txt           |  79 +++
>   arch/arm/boot/dts/bcm-nsp.dtsi                     |   7 +
>   arch/arm/boot/dts/bcm958625k.dts                   |   9 +
>   drivers/pinctrl/bcm/Kconfig                        |  13 +
>   drivers/pinctrl/bcm/Makefile                       |   1 +
>   drivers/pinctrl/bcm/pinctrl-nsp-mux.c              | 650 +++++++++++++++++++++
>   6 files changed, 759 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pinctrl/brcm,nsp-pinmux.txt
>   create mode 100644 drivers/pinctrl/bcm/pinctrl-nsp-mux.c
>

This entire patch set looks good to me.

Reviewed-by: Ray Jui <rjui@broadcom.com>

Thanks,

Ray