[PATCH v12 04/16] arm64: kvm: allows kvm cpu hotplug

[marc.zyngier@arm.com (Marc Zyngier)]

On 11/12/15 08:06, AKASHI Takahiro wrote:
> Ashwin, Marc,
> 
> On 12/03/2015 10:58 PM, Marc Zyngier wrote:
>> On 02/12/15 22:40, Ashwin Chaugule wrote:
>>> Hello,
>>>
>>> On 24 November 2015 at 17:25, Geoff Levand <geoff@infradead.org> wrote:
>>>> From: AKASHI Takahiro <takahiro.akashi@linaro.org>
>>>>
>>>> The current kvm implementation on arm64 does cpu-specific initialization
>>>> at system boot, and has no way to gracefully shutdown a core in terms of
>>>> kvm. This prevents, especially, kexec from rebooting the system on a boot
>>>> core in EL2.
>>>>
>>>> This patch adds a cpu tear-down function and also puts an existing cpu-init
>>>> code into a separate function, kvm_arch_hardware_disable() and
>>>> kvm_arch_hardware_enable() respectively.
>>>> We don't need arm64-specific cpu hotplug hook any more.
>>>>
>>>> Since this patch modifies common part of code between arm and arm64, one
>>>> stub definition, __cpu_reset_hyp_mode(), is added on arm side to avoid
>>>> compiling errors.
>>>>
>>>> Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
>>>> ---
>>>>   arch/arm/include/asm/kvm_host.h   | 10 ++++-
>>>>   arch/arm/include/asm/kvm_mmu.h    |  1 +
>>>>   arch/arm/kvm/arm.c                | 79 ++++++++++++++++++---------------------
>>>>   arch/arm/kvm/mmu.c                |  5 +++
>>>>   arch/arm64/include/asm/kvm_host.h | 16 +++++++-
>>>>   arch/arm64/include/asm/kvm_mmu.h  |  1 +
>>>>   arch/arm64/include/asm/virt.h     |  9 +++++
>>>>   arch/arm64/kvm/hyp-init.S         | 33 ++++++++++++++++
>>>>   arch/arm64/kvm/hyp.S              | 32 ++++++++++++++--
>>>>   9 files changed, 138 insertions(+), 48 deletions(-)
>>>
>>> [..]
>>>
>>>>
>>>>
>>>>   static struct notifier_block hyp_init_cpu_pm_nb = {
>>>> @@ -1108,11 +1119,6 @@ static int init_hyp_mode(void)
>>>>          }
>>>>
>>>>          /*
>>>> -        * Execute the init code on each CPU.
>>>> -        */
>>>> -       on_each_cpu(cpu_init_hyp_mode, NULL, 1);
>>>> -
>>>> -       /*
>>>>           * Init HYP view of VGIC
>>>>           */
>>>>          err = kvm_vgic_hyp_init();
>>>
>>> With this flow, the cpu_init_hyp_mode() is called only at VM guest
>>> creation, but vgic_hyp_init() is called at bootup. On a system with
>>> GICv3, it looks like we end up with bogus values from the ICH_VTR_EL2
>>> (to get the number of LRs), because we're not reading it from EL2
>>> anymore.
> 
> Thank you for pointing this out.
> Recently I tested my kdump code on hikey, and as hikey(hi6220) has gic-400,
> I didn't notice this problem.

Because GIC-400 is a GICv2 implementation, which is entirely MMIO based.
GICv3 uses some system registers that are only available at EL2, and KVM
needs some information contained in these registers before being able to
get initialized.

>> Indeed, this is completely broken (I just reproduced the issue on a
>> model). I wish this kind of details had been checked earlier, but thanks
>> for pointing it out.
>>
>>> Whats the best way to fix this?
>>> - Call kvm_arch_hardware_enable() before vgic_hyp_init() and disable later?
>>> - Fold the VGIC init stuff back into hardware_enable()?
>>
>> None of that works - kvm_arch_hardware_enable() is called once per CPU,
>> while vgic_hyp_init() can only be called once. Also,
>> kvm_arch_hardware_enable() is called from interrupt context, and I
>> wouldn't feel comfortable starting probing DT and allocating stuff from
>> there.
> 
> Do you think so?
> How about the fixup! patch attached below?
> The point is that, like Ashwin's first idea, we initialize cpus temporarily
> before kvm_vgic_hyp_init() and then soon reset cpus again. Thus,
> kvm cpu hotplug will still continue to work as before.
> Now that cpu_init_hyp_mode() is revived as exactly the same as Marc's
> original code, the change will not be a big jump.

This seems quite complicated:
- init EL2 on  all CPUs
- do some initialization
- tear all CPUs EL2 down
- let KVM drive the vectors being set or not

My questions are: why do we need to do this on *all* cpus? Can't that
work on a single one?

Also, the simple fact that we were able to get some junk value is a sign
that something is amiss. I'd expect a splat of some sort, because we now
have a possibility of doing things in the wrong context.

> 
> If kvm_hyp_call() in vgic_v3_probe()/kvm_vgic_hyp_init() is a *problem*,
> I hope this should work. Actually I confirmed that, with this fixup! patch,
> we could run a kvm guest and also successfully executed kexec on model w/gic-v3.
> 
> My only concern is the following kernel message I saw when kexec shut down
> the kernel:
> (Please note that I was running one kvm quest (pid=961) here.)
> 
> ===
> sh-4.3# ./kexec -d -e
> kexec version: 15.11.16.11.06-g41e52e2
> arch_process_options:112: command_line: (null)
> arch_process_options:114: initrd: (null)
> arch_process_options:115: dtb: (null)
> arch_process_options:117: port: 0x0
> kvm: exiting hardware virtualization
> kvm [961]: Unsupported exception type: 6248304    <== this message

That makes me feel very uncomfortable. It looks like we've exited a
guest with some horrible value in X0. How is that even possible?

This deserves to be investigated.

Thanks,

	M.
-- 
Jazz is not dead. It just smells funny...