[PATCH 3/4] ARM: dts: kirkwood: add Seagate GoFlex Home

[yoann@printk.fr (Yoann Sculo)]

Hi Luka,

Did you have the time to look at those issues ?

Yoann

Le 06/11/2015 17:05, Yoann Sculo a ?crit :
> Hi Luka,
>
> I tested your patch on the GoFlex Home.
>
>> +    gpio-leds {
>> +        compatible = "gpio-leds";
>> +
>> +        health {
>> +            label = "status:green:health";
>> +            gpios = <&gpio1 14 1>;
>> +            linux,default-trigger = "default-on";
>> +        };
>> +        fault {
>> +            label = "status:orange:fault";
>> +            gpios = <&gpio1 15 1>;
>> +        };
>> +        misc {
>> +            label = "status:white:misc";
>> +            gpios = <&gpio1 8 1>;
>> +            linux,default-trigger = "ide-disk";
>> +        };
>> +    };
>
> I noticed green and orange leds were working fine (0 == off, 1 == on).
> But white led polarity is inverted (1 == off, 0 == on).
>
>> +    partition at 500000 {
>> +        label = "pogoplug";
>> +        reg = <0x0500000 0x2000000>;
>> +    };
>
> I don't think pogoplug is the proper label for this partition. It seems
> duplicated from "kirkwood-goflexnet.dts" I guess you could label it
> "data" for instance.
>
> Tested-by: Yoann Sculo <yoann@printk.fr>
>
> Yoann