From: zyw@rock-chips.com (Chris Zhong)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/6] Add mipi dsi support for rk3288
Date: Fri, 18 Dec 2015 17:54:03 +0800 [thread overview]
Message-ID: <5673D7BB.50000@rock-chips.com> (raw)
In-Reply-To: <3523259.ZRgH1Shd9Y@diego>
Hi Heiko
Thanks for your reminder.
I have post the v6.1 mipi patch with the atomic support.
<https://patchwork.kernel.org/patch/7881781/>
On 12/17/2015 05:29 PM, Heiko St?bner wrote:
> Hi Chris,
>
> Am Mittwoch, 16. Dezember 2015, 18:10:10 schrieb Chris Zhong:
>> The rk3288 MIPI DSI is a Synopsys DesignWare MIPI DSI host controller
>> IP. This series adds support for a Synopsys DesignWare MIPI DSI host
>> controller DRM driver.
>>
>> The MIPI DSI feature is tested on rk3288 evb board, backport them to
>> chrome os kernel chrome_v3.14, and it can display normally.
>>
>> This patchset is base on the patchset from Ying.liu at freescale.com.
>> <http://www.spinics.net/lists/dri-devel/msg77181.html>
>>
>> According to the suggestion from Thierry, I have get rid of the bridge,
>> and register the encoder & connecter in drm/rockchip/dw-mipi-dsi.c.
> from my point it looks good (although I cannot really speak on the drm-related
> internals).
>
> But I do think we'll be doing atomic modesetting conversion first (last
> version posted from Mark today), so you should probably make sure your dsi
> driver still works after that conversion and make changes if needed.
>
>
> Heiko
>
>>
>> Changes in v6:
>> - update the document, since the bridge device has been deleted.
>> - Do not use bridge driver (Thierry Reding)
>> - Optimization the phy init sequence
>>
>> Changes in v5:
>> - modify the clk name to SCLK_MIPIDSI_24M
>> - add a blank line befor lcd_en
>>
>> Changes in v4:
>> - use clk_round_rate to check the clock rate in vop_crtc_mode_fixup
>>
>> Changes in v3:
>> - move dw_mipi_dsi_rockchip.txt to bindings/display/rockchip/
>>
>> Chris Zhong (5):
>> drm/rockchip: return a true clock rate to adjusted_mode
>> Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver
>> drm: rockchip: Support Synopsys DW MIPI DSI
>> ARM: dts: rockchip: add rk3288 mipi_dsi nodes
>> ARM: dts: rockchip: add support mipi panel tv080wum-nl0
>>
>> Liu Ying (1):
>> drm/dsi: Add a helper to get bits per pixel of MIPI DSI pixel format
>>
>> .../display/rockchip/dw_mipi_dsi_rockchip.txt | 60 +
>> arch/arm/boot/dts/rk3288-evb.dtsi | 20 +-
>> arch/arm/boot/dts/rk3288.dtsi | 39 +
>> drivers/gpu/drm/rockchip/Kconfig | 10 +
>> drivers/gpu/drm/rockchip/Makefile | 1 +
>> drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 1200
>> ++++++++++++++++++++ drivers/gpu/drm/rockchip/rockchip_drm_vop.c |
>> 8 +
>> include/drm/drm_mipi_dsi.h | 14 +
>> 8 files changed, 1351 insertions(+), 1 deletion(-)
>> create mode 100644
>> Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
>> create mode 100644 drivers/gpu/drm/rockchip/dw-mipi-dsi.c
>
>
>
prev parent reply other threads:[~2015-12-18 9:54 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-12-16 10:10 [PATCH v6 0/6] Add mipi dsi support for rk3288 Chris Zhong
2015-12-16 10:10 ` [PATCH v6 1/6] drm/rockchip: return a true clock rate to adjusted_mode Chris Zhong
2015-12-16 10:10 ` [PATCH v6 3/6] Documentation: dt-bindings: Add bindings for rk3288 DW MIPI DSI driver Chris Zhong
2015-12-16 10:10 ` [PATCH v6 4/6] drm: rockchip: Support Synopsys DW MIPI DSI Chris Zhong
2015-12-18 9:47 ` [PATCH v6.1 " Chris Zhong
2015-12-18 10:18 ` Mark yao
2015-12-22 6:58 ` [PATCH v6.2 " Chris Zhong
2015-12-23 3:43 ` [PATCH v6.3 " Chris Zhong
2015-12-24 0:55 ` Mark yao
2016-01-06 1:48 ` Mark yao
2016-01-06 4:16 ` Chris Zhong
2016-01-06 2:04 ` Mark yao
2015-12-16 10:10 ` [PATCH v6 5/6] ARM: dts: rockchip: add rk3288 mipi_dsi nodes Chris Zhong
2015-12-16 10:10 ` [PATCH v6 6/6] ARM: dts: rockchip: add support mipi panel tv080wum-nl0 Chris Zhong
2015-12-17 9:29 ` [PATCH v6 0/6] Add mipi dsi support for rk3288 Heiko Stübner
2015-12-18 9:54 ` Chris Zhong [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5673D7BB.50000@rock-chips.com \
--to=zyw@rock-chips.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).