[PATCH 2/3] arm: dts: phy3250: add SD fixed regulator

[sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)]

On 12/21/2015 07:58 PM, Vladimir Zapolskiy wrote:

>>> The change adds fixed voltage regulator for SD controller, ARM MMCI
>>> controller driver uses it to control card power management.
>>>
>>> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
>>> ---
>>>    arch/arm/boot/dts/phy3250.dts | 10 ++++++++++
>>>    1 file changed, 10 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts
>>> index 34e15fd..5465b9e 100644
>>> --- a/arch/arm/boot/dts/phy3250.dts
>>> +++ b/arch/arm/boot/dts/phy3250.dts
>>> @@ -45,6 +45,15 @@
>>>    			enable-active-high;
>>>    			regulator-boot-on;
>>>    		};
>>> +
>>> +		sd_reg: fixed-regulator at 2 {
>>
>>      Please just "regulator at 2", to comply with the ePAPR standard.
>
> thanks for review, just for my information, do I understand correctly
> that you reference to "Generic Names Recommendation" ?

    Sure, AKA 2.2.2. :-)

> I have no objection to generalize device tree node name as you
> suggested, will do it.

    TIA.

> With best wishes,
> Vladimir

MBR, Sergei