From mboxrd@z Thu Jan  1 00:00:00 1970
From: hanjun.guo@linaro.org (Hanjun Guo)
Date: Tue, 22 Dec 2015 20:54:19 +0800
Subject: [RESEND PATCH v7 2/4] Documentation, dt, arm64/arm: dt bindings
 for numa.
In-Reply-To: <20151221142701.GR23092@arm.com>
References: <1450413433-7467-1-git-send-email-gkulkarni@caviumnetworks.com>
 <20151218141826.GB30229@leverpostej>
 <CAFpQJXVmXkgD1FuMbU3rWg5MR3AEeneHAiG6XVfOs6m6e6=byQ@mail.gmail.com>
 <20151218180346.GF30229@leverpostej> <20151221142701.GR23092@arm.com>
Message-ID: <567947FB.2090301@linaro.org>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 2015/12/21 22:27, Will Deacon wrote:
> Mark,
>
> On Fri, Dec 18, 2015 at 06:03:47PM +0000, Mark Rutland wrote:
>> On Fri, Dec 18, 2015 at 09:00:18PM +0530, Ganapatrao Kulkarni wrote:
>>> Hi Mark,
>>>
>>> On Fri, Dec 18, 2015 at 7:48 PM, Mark Rutland <mark.rutland@arm.com> wrote:
>>>>> +- distance-matrix
>>>>> +  This property defines a matrix to describe the relative distances
>>>>> +  between all numa nodes.
>>>>> +  It is represented as a list of node pairs and their relative distance.
>>>>> +
>>>>> +  Note:
>>>>> +     1. Each entry represents distance from first node to second node.
>>>>> +     The distance are equal in either direction.
>>>>> +     2. The distance from a node to self(local distance) is represented
>>>>> +     with value 10 and all inter node distance should be represented with
>>>>> +     value greater than 10.
>>>>> +     3. distance-matrix shold have entries in lexicographical ascending
>>>>> +     order of nodes.
>>>>> +     4. There must be only one Device node distance-map and must reside in the root node.
>>>>
>>>> I am still concerned that the local distance of 10 is completely
>>>> arbitrary.
>>> IMHO, i do not see any issue in having defined local distance to
>>> arbitrary number(10).
>>> inter node numa distance is relative number with respect to local distance
>>> we have to fix local distance to some value, having it in dt to make
>>> generic will not add
>>> any additional value as compared to having the fixed local distance to 10.
>>
>> That's not quite true. The figure chosen for the local distance affects
>> the granularity with which you can describe all distances.
>>
>> By using a local distance of 10 we can only encode distances in 10%
>> chunks of that. Using a local distance of 100 we could encode in 1%
>> chunks of that.
>
> Whilst I see what you're saying, the local distance of 10 seems to be
> part of the ACPI spec, and is the reason why the core code defines it
> that way.
>
> Now, we can of course do our own thing for device-tree, but I really
> don't think it's worth our while to change this without a compelling
> use-case.

I agree, that would simplify the kernel code as well.

Thanks
Hanjun