linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: s-anna@ti.com (Suman Anna)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] ARM: DRA7: add pdata-quirks to do reset of PCIe
Date: Wed, 13 Jan 2016 11:35:19 -0600	[thread overview]
Message-ID: <56968AD7.3010108@ti.com> (raw)
In-Reply-To: <1452667666-17533-3-git-send-email-kishon@ti.com>

Hi Kishon,

On 01/13/2016 12:47 AM, Kishon Vijay Abraham I wrote:
> Use pdata-quirks to reset PCIe IP. 

This can do with some clarity. The patch adds the platform data, doesn't
do reset.

This is to be used until
> a drivers/reset/ interface is available for this purpose.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
> ---
>  arch/arm/mach-omap2/pdata-quirks.c       |   11 +++++++++++
>  include/linux/platform_data/pci-dra7xx.h |   22 ++++++++++++++++++++++
>  2 files changed, 33 insertions(+)
>  create mode 100644 include/linux/platform_data/pci-dra7xx.h
> 
> diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c
> index 5814477..f5a65fe 100644
> --- a/arch/arm/mach-omap2/pdata-quirks.c
> +++ b/arch/arm/mach-omap2/pdata-quirks.c
> @@ -23,6 +23,7 @@
>  #include <linux/platform_data/pinctrl-single.h>
>  #include <linux/platform_data/iommu-omap.h>
>  #include <linux/platform_data/wkup_m3.h>
> +#include <linux/platform_data/pci-dra7xx.h>
>  
>  #include "common.h"
>  #include "common-board-devices.h"
> @@ -404,6 +405,14 @@ static void __init omap5_uevm_legacy_init(void)
>  }
>  #endif
>  
> +#ifdef CONFIG_SOC_DRA7XX
> +static struct pci_dra7xx_platform_data dra7xx_pci_pdata = {
> +	.reset_name = "pcie",
> +	.assert_reset = omap_device_assert_hardreset,
> +	.deassert_reset = omap_device_deassert_hardreset,
> +};
> +#endif
> +
>  static struct pcs_pdata pcs_pdata;
>  
>  void omap_pcs_legacy_init(int irq, void (*rearm)(void))
> @@ -474,6 +483,8 @@ static struct of_dev_auxdata omap_auxdata_lookup[] __initdata = {
>  #endif
>  #ifdef CONFIG_SOC_DRA7XX
>  	OF_DEV_AUXDATA("ti,dra7-padconf", 0x4a003400, "4a003400.pinmux", &pcs_pdata),
> +	OF_DEV_AUXDATA("ti,dra7-pcie", 0x51000000, "51000000.pcie", &dra7xx_pci_pdata),
> +	OF_DEV_AUXDATA("ti,dra7-pcie", 0x51800000, "51800000.pcie", &dra7xx_pci_pdata),
>  #endif
>  #ifdef CONFIG_SOC_AM43XX
>  	OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata),
> diff --git a/include/linux/platform_data/pci-dra7xx.h b/include/linux/platform_data/pci-dra7xx.h
> new file mode 100644
> index 0000000..792c8ed
> --- /dev/null
> +++ b/include/linux/platform_data/pci-dra7xx.h
> @@ -0,0 +1,22 @@
> +/*
> + * pcie-dra7xx - Platform data for PCIe controller
> + *
> + * Copyright (C) 2016 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * Authors: Kishon Vijay Abraham I <kishon@ti.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#ifndef __PCI_DRA7XX_H
> +#define __PCI_DRA7XX_H
> +
> +struct pci_dra7xx_platform_data {

can you add kernel-doc comments for the structure?

> +	const char *reset_name;
> +
> +	int (*assert_reset)(struct platform_device *pdev, const char *name);
> +	int (*deassert_reset)(struct platform_device *pdev, const char *name);
> +};

nit, would like to see a blank line here

regards
Suman

> +#endif /* __PCI_DRA7XX_H */
> 

  reply	other threads:[~2016-01-13 17:35 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-13  6:47 [PATCH v2 0/3] dra7xx: get pcie working in mainline Kishon Vijay Abraham I
2016-01-13  6:47 ` [PATCH v2 1/3] ARM: DRA7: hwmod: Add reset data for PCIe Kishon Vijay Abraham I
2016-01-13 17:13   ` Tony Lindgren
2016-01-13 17:46     ` Suman Anna
2016-01-13  6:47 ` [PATCH v2 2/3] ARM: DRA7: add pdata-quirks to do reset of PCIe Kishon Vijay Abraham I
2016-01-13 17:35   ` Suman Anna [this message]
2016-01-13  6:47 ` [PATCH v2 3/3] pci: dra7xx: use pdata callbacks to perform reset Kishon Vijay Abraham I
2016-01-13 17:19   ` Tony Lindgren
2016-01-13 17:51   ` Suman Anna
2016-01-14  8:37     ` Kishon Vijay Abraham I
2016-01-14 13:28       ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56968AD7.3010108@ti.com \
    --to=s-anna@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).