linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: nicolas.ferre@atmel.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 3/5] ARM: at91/dt: sama5d2: add adc device
Date: Mon, 18 Jan 2016 09:09:31 +0100	[thread overview]
Message-ID: <569C9DBB.6060808@atmel.com> (raw)
In-Reply-To: <20160118075931.GC10663@odux.rfo.atmel.com>

Le 18/01/2016 08:59, Ludovic Desroches a ?crit :
> On Sat, Jan 16, 2016 at 11:38:30AM +0000, Jonathan Cameron wrote:
>> On 14/01/16 15:38, Ludovic Desroches wrote:
>>> Add the ADC device, and remove the adc_op_clk which is useless since the
>>> adc sampling frequency is configured with sysfs.
>>>
>>> Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
>> I've now applied the driver to the togreg branch of iio.git.
>> Should get a pull request out to Greg in about 2 weeks time and it'll
>> probably be in linux-next a week after that.  I'm assuming all the device
>> tree changes will got through the at91 tree and arm-soc etc. 
>> Shout if you want me to take them through IIO.
>>
> 
> Ok, I think Nicolas would take this patch.

Sure, we'll take them through AT91 then arm-soc trees.

Thanks, bye.


>>> ---
>>>  arch/arm/boot/dts/sama5d2.dtsi | 18 ++++++++++++------
>>>  1 file changed, 12 insertions(+), 6 deletions(-)
>>>
>>> diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
>>> index 3f750f6..46dd430 100644
>>> --- a/arch/arm/boot/dts/sama5d2.dtsi
>>> +++ b/arch/arm/boot/dts/sama5d2.dtsi
>>> @@ -88,12 +88,6 @@
>>>  			#clock-cells = <0>;
>>>  			clock-frequency = <0>;
>>>  		};
>>> -
>>> -		adc_op_clk: adc_op_clk{
>>> -			compatible = "fixed-clock";
>>> -			#clock-cells = <0>;
>>> -			clock-frequency = <1000000>;
>>> -		};
>>>  	};
>>>  
>>>  	ns_sram: sram at 00200000 {
>>> @@ -1085,6 +1079,18 @@
>>>  				status = "disabled";
>>>  			};
>>>  
>>> +			adc: adc at fc030000 {
>>> +				compatible = "atmel,sama5d2-adc";
>>> +				reg = <0xfc030000 0x100>;
>>> +				interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
>>> +				clocks = <&adc_clk>;
>>> +				clock-names = "adc_clk";
>>> +				atmel,min-sample-rate-hz = <200000>;
>>> +				atmel,max-sample-rate-hz = <20000000>;
>>> +				atmel,startup-time-ms = <4>;
>>> +				status = "disabled";
>>> +			};
>>> +
>>>  			pioA: pinctrl at fc038000 {
>>>  				compatible = "atmel,sama5d2-pinctrl";
>>>  				reg = <0xfc038000 0x600>;
>>>
>>
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>> the body of a message to majordomo at vger.kernel.org
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 


-- 
Nicolas Ferre

  reply	other threads:[~2016-01-18  8:09 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-14 15:38 [PATCH v3 0/5] Introduce at91_adc8xx driver Ludovic Desroches
2016-01-14 15:38 ` [PATCH v3 1/5] iio:adc:at91_adc8xx: introduce new atmel adc driver Ludovic Desroches
2016-01-16 11:27   ` Jonathan Cameron
2016-01-16 11:35     ` Jonathan Cameron
2016-01-18  7:55       ` Ludovic Desroches
2016-01-14 15:38 ` [PATCH v3 2/5] MAINTAINERS: add entry for Atmel ADC 8xx driver Ludovic Desroches
2016-01-15  8:54   ` [RESEND PATCH v3 2/5] MAINTAINERS: add entry for Atmel SAMA5D2 ADC driver Ludovic Desroches
2016-01-14 15:38 ` [PATCH v3 3/5] ARM: at91/dt: sama5d2: add adc device Ludovic Desroches
2016-01-16 11:38   ` Jonathan Cameron
2016-01-18  7:59     ` Ludovic Desroches
2016-01-18  8:09       ` Nicolas Ferre [this message]
2016-01-14 15:38 ` [PATCH v3 4/5] ARM: at91/dt: sama5d2 Xplained: enable the " Ludovic Desroches
2016-01-14 15:38 ` [PATCH v3 5/5] ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig Ludovic Desroches

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=569C9DBB.6060808@atmel.com \
    --to=nicolas.ferre@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).