From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] soc: mediatek: PMIC wrap: clear the STAUPD_TRIG bit of WDT_SRC_EN
Date: Thu, 21 Jan 2016 12:13:24 +0100 [thread overview]
Message-ID: <56A0BD54.5050403@gmail.com> (raw)
In-Reply-To: <1453374240-13495-1-git-send-email-henryc.chen@mediatek.com>
On 21/01/16 12:04, Henry Chen wrote:
> Since STAUPD interrupts aren't handled on mt8173, disable watchdog timeout
> monitor of STAUPD to avoid WDT_INT triggered by STAUPD.
>
> Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
> ---
Applied with the reviewed-by from Daniel.
Thanks.
> Change since v1:
> Change the check condition to pwrap_is_mt8173.
> ---
> drivers/soc/mediatek/mtk-pmic-wrap.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
> index af919b1..50bc0db 100644
> --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
> +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
> @@ -60,6 +60,15 @@
> #define PWRAP_MAN_CMD_OP_OUTD (0x9 << 8)
> #define PWRAP_MAN_CMD_OP_OUTQ (0xa << 8)
>
> +/* macro for Watch Dog Timer Source */
> +#define PWRAP_WDT_SRC_EN_STAUPD_TRIG (1 << 25)
> +#define PWRAP_WDT_SRC_EN_HARB_STAUPD_DLE (1 << 20)
> +#define PWRAP_WDT_SRC_EN_HARB_STAUPD_ALE (1 << 6)
> +#define PWRAP_WDT_SRC_MASK_ALL 0xffffffff
> +#define PWRAP_WDT_SRC_MASK_NO_STAUPD ~(PWRAP_WDT_SRC_EN_STAUPD_TRIG | \
> + PWRAP_WDT_SRC_EN_HARB_STAUPD_DLE | \
> + PWRAP_WDT_SRC_EN_HARB_STAUPD_ALE)
> +
> /* macro for slave device wrapper registers */
> #define PWRAP_DEW_BASE 0xbc00
> #define PWRAP_DEW_EVENT_OUT_EN (PWRAP_DEW_BASE + 0x0)
> @@ -830,7 +839,7 @@ MODULE_DEVICE_TABLE(of, of_pwrap_match_tbl);
>
> static int pwrap_probe(struct platform_device *pdev)
> {
> - int ret, irq;
> + int ret, irq, wdt_src;
> struct pmic_wrapper *wrp;
> struct device_node *np = pdev->dev.of_node;
> const struct of_device_id *of_id =
> @@ -920,7 +929,13 @@ static int pwrap_probe(struct platform_device *pdev)
>
> /* Initialize watchdog, may not be done by the bootloader */
> pwrap_writel(wrp, 0xf, PWRAP_WDT_UNIT);
> - pwrap_writel(wrp, 0xffffffff, PWRAP_WDT_SRC_EN);
> + /*
> + * Since STAUPD was not used on mt8173 platform,
> + * so STAUPD of WDT_SRC which should be turned off
> + */
> + wdt_src = pwrap_is_mt8173(wrp) ?
> + PWRAP_WDT_SRC_MASK_NO_STAUPD : PWRAP_WDT_SRC_MASK_ALL;
> + pwrap_writel(wrp, wdt_src, PWRAP_WDT_SRC_EN);
> pwrap_writel(wrp, 0x1, PWRAP_TIMER_EN);
> pwrap_writel(wrp, ~((1 << 31) | (1 << 1)), PWRAP_INT_EN);
>
>
prev parent reply other threads:[~2016-01-21 11:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-01-21 11:04 [PATCH v2] soc: mediatek: PMIC wrap: clear the STAUPD_TRIG bit of WDT_SRC_EN Henry Chen
2016-01-21 11:13 ` Matthias Brugger [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56A0BD54.5050403@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).