From mboxrd@z Thu Jan 1 00:00:00 1970 From: hdegoede@redhat.com (Hans de Goede) Date: Wed, 27 Jan 2016 19:16:42 +0100 Subject: [linux-sunxi] Problem with Allwinner H3 clocks In-Reply-To: <20160127175512.87caf31b5e21a1fec91507f2@free.fr> References: <20160127084607.665fb8c38eeb5733ce4232da@free.fr> <20160127103714.58312b152adb4148bae2f93b@free.fr> <56A8D5E5.30701@gmail.com> <20160127175512.87caf31b5e21a1fec91507f2@free.fr> Message-ID: <56A9098A.5010107@redhat.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi, On 27-01-16 17:55, Jean-Francois Moine wrote: > On Wed, 27 Jan 2016 15:36:21 +0100 > Jens Kuske wrote: > >> That sounds strange, 4.5-rc1 is working perfectly fine for me too. >> >> I doubt the patch you linked is responsible for making it work, it only >> removes the hardcoded output-names. If your DT isn't messed up this >> isn't relevant at all since pll8, the initial reason for this patch, is >> only a dummy clock for now. Are you sure you are using a clean v4.5-rc1 >> without any own modifications? > > To be sure, I generated a pure 4.5-rc1 kernel. Same result: no UART. > Maybe... one more information: I am using Allwinner's u-boot. Could be that that is the culprit, why are you not using upstream u-boot? upstream u-boot has H3 and orangepi-pc support now. Regards, Hans