linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V4 11/11] soc: mediatek: PMIC wrap: add MT2701/7623 support
Date: Mon, 1 Feb 2016 12:21:09 +0100	[thread overview]
Message-ID: <56AF3FA5.9060803@gmail.com> (raw)
In-Reply-To: <1453894149-44127-11-git-send-email-blogic@openwrt.org>



On 27/01/16 12:29, John Crispin wrote:
> Add the registers, callbacks and data structures required to make the
> wrapper work on MT2701 and MT7623.
>
> Signed-off-by: John Crispin <blogic@openwrt.org>
> ---
>   drivers/soc/mediatek/mtk-pmic-wrap.c |  160 ++++++++++++++++++++++++++++++++++
>   1 file changed, 160 insertions(+)
>
> diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
> index 793b194..dbb09c6 100644
> --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
> +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
> @@ -52,6 +52,7 @@
>   #define PWRAP_DEW_WRITE_TEST_VAL	0xa55a
>
>   /* macro for manual command */
> +#define PWRAP_MAN_CMD_SPI_WRITE_NEW	(1 << 14)
>   #define PWRAP_MAN_CMD_SPI_WRITE		(1 << 13)
>   #define PWRAP_MAN_CMD_OP_CSH		(0x0 << 8)
>   #define PWRAP_MAN_CMD_OP_CSL		(0x1 << 8)
> @@ -202,6 +203,17 @@ enum pwrap_regs {
>   	PWRAP_DCM_EN,
>   	PWRAP_DCM_DBC_PRD,
>
> +	/* MT2701 only regs */
> +	PWRAP_OP_TYPE,
> +	PWRAP_MSB_FIRST,
> +	PWRAP_GPS_STA,
> +	PWRAP_ADC_CMD_ADDR,
> +	PWRAP_PWRAP_ADC_CMD,
> +	PWRAP_ADC_RDY_ADDR,
> +	PWRAP_ADC_RDATA_ADDR1,
> +	PWRAP_ADC_RDATA_ADDR2,
> +	PWRAP_ADC_WRAP_SEL,
> +
>   	/* MT8135 only regs */
>   	PWRAP_CSHEXT,
>   	PWRAP_EVENT_IN_EN,
> @@ -238,6 +250,96 @@ enum pwrap_regs {
>   	PWRAP_CIPHER_EN,
>   };
>
> +static int mt2701_regs[] = {
> +	[PWRAP_MUX_SEL] =		0x0,
> +	[PWRAP_WRAP_EN] =		0x4,
> +	[PWRAP_DIO_EN] =		0x8,
> +	[PWRAP_SIDLY] =			0xc,
> +	[PWRAP_OP_TYPE] =		0x10,
> +	[PWRAP_MSB_FIRST] =		0x14,
> +	[PWRAP_RDDMY] =			0x18,
> +	[PWRAP_SI_CK_CON] =		0x1c,
> +	[PWRAP_CSHEXT_WRITE] =		0x20,
> +	[PWRAP_CSHEXT_READ] =		0x24,
> +	[PWRAP_CSLEXT_START] =		0x28,
> +	[PWRAP_CSLEXT_END] =		0x2c,
> +	[PWRAP_STAUPD_PRD] =		0x30,
> +	[PWRAP_STAUPD_GRPEN] =		0x34,
> +	[PWRAP_STAUPD_MAN_TRIG] =	0x38,
> +	[PWRAP_STAUPD_STA] =		0x3c,
> +	[PWRAP_GPS_STA] =		0x40,
> +	[PWRAP_WRAP_STA] =		0x44,
> +	[PWRAP_HARB_INIT] =		0x48,
> +	[PWRAP_HARB_HPRIO] =		0x4c,
> +	[PWRAP_HIPRIO_ARB_EN] =		0x50,
> +	[PWRAP_HARB_STA0] =		0x54,
> +	[PWRAP_HARB_STA1] =		0x58,
> +	[PWRAP_MAN_EN] =		0x5c,
> +	[PWRAP_MAN_CMD] =		0x60,
> +	[PWRAP_MAN_RDATA] =		0x64,
> +	[PWRAP_MAN_VLDCLR] =		0x68,
> +	[PWRAP_WACS0_EN] =		0x6c,
> +	[PWRAP_INIT_DONE0] =		0x70,
> +	[PWRAP_WACS0_CMD] =		0x74,
> +	[PWRAP_WACS0_RDATA] =		0x78,
> +	[PWRAP_WACS0_VLDCLR] =		0x7c,
> +	[PWRAP_WACS1_EN] =		0x80,
> +	[PWRAP_INIT_DONE1] =		0x84,
> +	[PWRAP_WACS1_CMD] =		0x88,
> +	[PWRAP_WACS1_RDATA] =		0x8c,
> +	[PWRAP_WACS1_VLDCLR] =		0x90,
> +	[PWRAP_WACS2_EN] =		0x94,
> +	[PWRAP_INIT_DONE2] =		0x98,
> +	[PWRAP_WACS2_CMD] =		0x9c,
> +	[PWRAP_WACS2_RDATA] =		0xa0,
> +	[PWRAP_WACS2_VLDCLR] =		0xa4,
> +	[PWRAP_INT_EN] =		0xa8,
> +	[PWRAP_INT_FLG_RAW] =		0xac,
> +	[PWRAP_INT_FLG] =		0xb0,
> +	[PWRAP_INT_CLR] =		0xb4,
> +	[PWRAP_SIG_ADR] =		0xb8,
> +	[PWRAP_SIG_MODE] =		0xbc,
> +	[PWRAP_SIG_VALUE] =		0xc0,
> +	[PWRAP_SIG_ERRVAL] =		0xc4,
> +	[PWRAP_CRC_EN] =		0xc8,
> +	[PWRAP_TIMER_EN] =		0xcc,
> +	[PWRAP_TIMER_STA] =		0xd0,
> +	[PWRAP_WDT_UNIT] =		0xd4,
> +	[PWRAP_WDT_SRC_EN] =		0xd8,
> +	[PWRAP_WDT_FLG] =		0xdc,
> +	[PWRAP_DEBUG_INT_SEL] =		0xe0,
> +	[PWRAP_DVFS_ADR0] =		0xe4,
> +	[PWRAP_DVFS_WDATA0] =		0xe8,
> +	[PWRAP_DVFS_ADR1] =		0xec,
> +	[PWRAP_DVFS_WDATA1] =		0xf0,
> +	[PWRAP_DVFS_ADR2] =		0xf4,
> +	[PWRAP_DVFS_WDATA2] =		0xf8,
> +	[PWRAP_DVFS_ADR3] =		0xfc,
> +	[PWRAP_DVFS_WDATA3] =		0x100,
> +	[PWRAP_DVFS_ADR4] =		0x104,
> +	[PWRAP_DVFS_WDATA4] =		0x108,
> +	[PWRAP_DVFS_ADR5] =		0x10c,
> +	[PWRAP_DVFS_WDATA5] =		0x110,
> +	[PWRAP_DVFS_ADR6] =		0x114,
> +	[PWRAP_DVFS_WDATA6] =		0x118,
> +	[PWRAP_DVFS_ADR7] =		0x11c,
> +	[PWRAP_DVFS_WDATA7] =		0x120,
> +	[PWRAP_CIPHER_KEY_SEL] =	0x124,
> +	[PWRAP_CIPHER_IV_SEL] =		0x128,
> +	[PWRAP_CIPHER_EN] =		0x12c,
> +	[PWRAP_CIPHER_RDY] =		0x130,
> +	[PWRAP_CIPHER_MODE] =		0x134,
> +	[PWRAP_CIPHER_SWRST] =		0x138,
> +	[PWRAP_DCM_EN] =		0x13c,
> +	[PWRAP_DCM_DBC_PRD] =		0x140,
> +	[PWRAP_ADC_CMD_ADDR] =		0x144,
> +	[PWRAP_PWRAP_ADC_CMD] =		0x148,
> +	[PWRAP_ADC_RDY_ADDR] =		0x14c,
> +	[PWRAP_ADC_RDATA_ADDR1] =	0x150,
> +	[PWRAP_ADC_RDATA_ADDR2] =	0x154,
> +	[PWRAP_ADC_WRAP_SEL] =		0x184,
> +};
> +
>   static int mt8173_regs[] = {
>   	[PWRAP_MUX_SEL] =		0x0,
>   	[PWRAP_WRAP_EN] =		0x4,
> @@ -399,6 +501,7 @@ enum pmic_type {
>   };
>
>   enum pwrap_type {
> +	PWRAP_MT2701,
>   	PWRAP_MT8135,
>   	PWRAP_MT8173,
>   };
> @@ -648,6 +751,30 @@ static int pwrap_mt8173_init_reg_clock(struct pmic_wrapper *wrp)
>   	return 0;
>   }
>
> +static int pwrap_mt2701_init_reg_clock(struct pmic_wrapper *wrp)
> +{
> +	switch (wrp->slave->type) {
> +	case PMIC_MT6397:
> +		pwrap_writel(wrp, 0xc, PWRAP_RDDMY);
> +		pwrap_writel(wrp, 0x4, PWRAP_CSHEXT_WRITE);
> +		pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_READ);
> +		pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
> +		pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
> +		break;
> +
> +	case PMIC_MT6323:
> +		pwrap_writel(wrp, 0x8, PWRAP_RDDMY);
> +		pwrap_dew_write(wrp, PWRAP_DEW_RDDMY_NO, 0x8);
> +		pwrap_writel(wrp, 0x5, PWRAP_CSHEXT_WRITE);
> +		pwrap_writel(wrp, 0x0, PWRAP_CSHEXT_READ);
> +		pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_START);
> +		pwrap_writel(wrp, 0x2, PWRAP_CSLEXT_END);
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
>   static bool pwrap_is_cipher_ready(struct pmic_wrapper *wrp)
>   {
>   	return pwrap_readl(wrp, PWRAP_CIPHER_RDY) & 1;
> @@ -680,6 +807,7 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
>   		pwrap_writel(wrp, 1, PWRAP_CIPHER_LOAD);
>   		pwrap_writel(wrp, 1, PWRAP_CIPHER_START);
>   		break;
> +	case PWRAP_MT2701:
>   	case PWRAP_MT8173:
>   		pwrap_writel(wrp, 1, PWRAP_CIPHER_EN);
>   		break;
> @@ -772,6 +900,24 @@ static int pwrap_mt8173_init_special(struct pmic_wrapper *wrp)
>   	return 0;
>   }
>
> +static int pwrap_mt2701_init_special(struct pmic_wrapper *wrp)
> +{
> +	/* GPS_INTF initialization */
> +	switch (wrp->slave->type) {
> +	case PMIC_MT6323:
> +		pwrap_writel(wrp, 0x076c, PWRAP_ADC_CMD_ADDR);
> +		pwrap_writel(wrp, 0x8000, PWRAP_PWRAP_ADC_CMD);
> +		pwrap_writel(wrp, 0x072c, PWRAP_ADC_RDY_ADDR);
> +		pwrap_writel(wrp, 0x072e, PWRAP_ADC_RDATA_ADDR1);
> +		pwrap_writel(wrp, 0x0730, PWRAP_ADC_RDATA_ADDR2);
> +		break;
> +	default:
> +		break;
> +	}
> +
> +	return 0;
> +}
> +
>   static int pwrap_init(struct pmic_wrapper *wrp)
>   {
>   	int ret;
> @@ -915,6 +1061,17 @@ static const struct of_device_id of_slave_match_tbl[] = {
>   };
>   MODULE_DEVICE_TABLE(of, of_slave_match_tbl);
>
> +static const struct pmic_wrapper_type pwrap_mt2701 = {
> +	.regs = mt2701_regs,
> +	.type = PWRAP_MT2701,
> +	.arb_en_all = 0x3f,
> +	.int_en_all = BIT(31) | BIT(2),
> +	.spi_w = PWRAP_MAN_CMD_SPI_WRITE_NEW,
> +	.wdt_src = PWRAP_WDT_SRC_MASK_ALL,
> +	.init_reg_clock = pwrap_mt2701_init_reg_clock,
> +	.init_special = pwrap_mt2701_init_special,
> +};
> +

.has_bridge = 0,
is missing.

Would it make sense to document the pmic_wrapper_type struct so that in, 
lets say, half a year it will be easier to remember what every member is 
used for?

Regards,
Matthias

  reply	other threads:[~2016-02-01 11:21 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-01-27 11:28 [PATCH V4 01/11] dt-bindings: ARM: Mediatek: add MT2701/7623 string to the PMIC wrapper doc John Crispin
2016-01-27 11:29 ` [PATCH V4 02/11] soc: mediatek: PMIC wrap: don't duplicate the wrapper data John Crispin
2016-01-27 11:29 ` [PATCH V4 03/11] soc: mediatek: PMIC wrap: add wrapper callbacks for init_reg_clock John Crispin
2016-01-27 11:29 ` [PATCH V4 04/11] soc: mediatek: PMIC wrap: split SoC specific init into callback John Crispin
2016-01-27 11:29 ` [PATCH V4 05/11] soc: mediatek: PMIC wrap: WRAP_INT_EN needs a different bitmask for MT2701/7623 John Crispin
2016-01-27 11:29 ` [PATCH V4 06/11] soc: mediatek: PMIC wrap: SPI_WRITE " John Crispin
2016-01-27 11:29 ` [PATCH V4 07/11] soc: mediatek: PMIC wrap: move wdt_src into the pmic_wrapper_type struct John Crispin
2016-01-27 11:29 ` [PATCH V4 08/11] soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and pwrap_is_mt8173() John Crispin
2016-01-27 11:29 ` [PATCH V4 09/11] soc: mediatek: PMIC wrap: add a slave specific struct John Crispin
2016-01-28  2:37   ` Henry Chen
2016-02-01  8:25     ` John Crispin
2016-02-01  8:38       ` Henry Chen
2016-01-27 11:29 ` [PATCH V4 10/11] soc: mediatek: PMIC wrap: add mt6323 slave support John Crispin
2016-01-27 11:29 ` [PATCH V4 11/11] soc: mediatek: PMIC wrap: add MT2701/7623 support John Crispin
2016-02-01 11:21   ` Matthias Brugger [this message]
2016-02-01 11:25   ` Matthias Brugger
2016-02-01 11:29     ` John Crispin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=56AF3FA5.9060803@gmail.com \
    --to=matthias.bgg@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).