* [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO
@ 2016-02-03 12:41 Nathan Rossi
2016-02-09 12:17 ` Michal Simek
0 siblings, 1 reply; 2+ messages in thread
From: Nathan Rossi @ 2016-02-03 12:41 UTC (permalink / raw)
To: linux-arm-kernel
Setup the USB controller and configure it to operate in host mode.
Additionally add the USB phy node for the ZYBO, including reset gpio
which is connected to a external MIO pin.
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: S?ren Brinkmann <soren.brinkmann@xilinx.com>
---
arch/arm/boot/dts/zynq-zybo.dts | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
index 16c9cac..8f085b3 100644
--- a/arch/arm/boot/dts/zynq-zybo.dts
+++ b/arch/arm/boot/dts/zynq-zybo.dts
@@ -33,6 +33,11 @@
stdout-path = "serial0:115200n8";
};
+ usb_phy0: phy0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio0 46 1>;
+ };
};
&clkc {
@@ -56,3 +61,9 @@
&uart1 {
status = "okay";
};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+ usb-phy = <&usb_phy0>;
+};
--
2.7.0
^ permalink raw reply related [flat|nested] 2+ messages in thread* [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO
2016-02-03 12:41 [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO Nathan Rossi
@ 2016-02-09 12:17 ` Michal Simek
0 siblings, 0 replies; 2+ messages in thread
From: Michal Simek @ 2016-02-09 12:17 UTC (permalink / raw)
To: linux-arm-kernel
On 3.2.2016 13:41, Nathan Rossi wrote:
> Setup the USB controller and configure it to operate in host mode.
> Additionally add the USB phy node for the ZYBO, including reset gpio
> which is connected to a external MIO pin.
>
> Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
> Cc: Rob Herring <robh+dt@kernel.org>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Michal Simek <michal.simek@xilinx.com>
> Cc: S?ren Brinkmann <soren.brinkmann@xilinx.com>
> ---
> arch/arm/boot/dts/zynq-zybo.dts | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-zybo.dts b/arch/arm/boot/dts/zynq-zybo.dts
> index 16c9cac..8f085b3 100644
> --- a/arch/arm/boot/dts/zynq-zybo.dts
> +++ b/arch/arm/boot/dts/zynq-zybo.dts
> @@ -33,6 +33,11 @@
> stdout-path = "serial0:115200n8";
> };
>
> + usb_phy0: phy0 {
> + #phy-cells = <0>;
> + compatible = "usb-nop-xceiv";
> + reset-gpios = <&gpio0 46 1>;
> + };
> };
>
> &clkc {
> @@ -56,3 +61,9 @@
> &uart1 {
> status = "okay";
> };
> +
> +&usb0 {
> + status = "okay";
> + dr_mode = "host";
> + usb-phy = <&usb_phy0>;
> +};
>
Applied.
Thanks,
Michal
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-02-09 12:17 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-02-03 12:41 [PATCH] ARM: dts: zynq: Enable USB and USB PHY for ZYBO Nathan Rossi
2016-02-09 12:17 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).