From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V5 04/11] soc: mediatek: PMIC wrap: split SoC specific init into callback
Date: Thu, 11 Feb 2016 12:54:28 +0100 [thread overview]
Message-ID: <56BC7674.9030706@gmail.com> (raw)
In-Reply-To: <1454841778-35529-5-git-send-email-blogic@openwrt.org>
On 07/02/16 11:42, John Crispin wrote:
> This patch moves the SoC specific wrapper init code into separate callback
> to avoid pwrap_init() getting too large.
>
Please explain a bit more, what the patch does.
> Signed-off-by: John Crispin <blogic@openwrt.org>
> ---
> Changes in V5
> * only check the return code of init_special() if the function is
> actually called
>
> drivers/soc/mediatek/mtk-pmic-wrap.c | 67 +++++++++++++++++++++-------------
> 1 file changed, 42 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/soc/mediatek/mtk-pmic-wrap.c b/drivers/soc/mediatek/mtk-pmic-wrap.c
> index b22b664..e3bbee5 100644
> --- a/drivers/soc/mediatek/mtk-pmic-wrap.c
> +++ b/drivers/soc/mediatek/mtk-pmic-wrap.c
> @@ -372,6 +372,7 @@ struct pmic_wrapper_type {
> enum pwrap_type type;
> u32 arb_en_all;
> int (*init_reg_clock)(struct pmic_wrapper *wrp);
> + int (*init_special)(struct pmic_wrapper *wrp);
Nit:
I wonder if we can find a better name for the callback, as init_special
sounds quite generic to me.
Thanks,
Matthias
> };
>
> static inline int pwrap_is_mt8135(struct pmic_wrapper *wrp)
> @@ -665,6 +666,41 @@ static int pwrap_init_cipher(struct pmic_wrapper *wrp)
> return 0;
> }
>
> +static int pwrap_mt8135_init_special(struct pmic_wrapper *wrp)
> +{
> + /* enable pwrap events and pwrap bridge in AP side */
> + pwrap_writel(wrp, 0x1, PWRAP_EVENT_IN_EN);
> + pwrap_writel(wrp, 0xffff, PWRAP_EVENT_DST_EN);
> + writel(0x7f, wrp->bridge_base + PWRAP_MT8135_BRIDGE_IORD_ARB_EN);
> + writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WACS3_EN);
> + writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WACS4_EN);
> + writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WDT_UNIT);
> + writel(0xffff, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WDT_SRC_EN);
> + writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_TIMER_EN);
> + writel(0x7ff, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INT_EN);
> +
> + /* enable PMIC event out and sources */
> + if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) ||
> + pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) {
> + dev_err(wrp->dev, "enable dewrap fail\n");
> + return -EFAULT;
> + }
> +
> + return 0;
> +}
> +
> +static int pwrap_mt8173_init_special(struct pmic_wrapper *wrp)
> +{
> + /* PMIC_DEWRAP enables */
> + if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) ||
> + pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) {
> + dev_err(wrp->dev, "enable dewrap fail\n");
> + return -EFAULT;
> + }
> +
> + return 0;
> +}
> +
> static int pwrap_init(struct pmic_wrapper *wrp)
> {
> int ret;
> @@ -743,31 +779,10 @@ static int pwrap_init(struct pmic_wrapper *wrp)
> pwrap_writel(wrp, 0x5, PWRAP_STAUPD_PRD);
> pwrap_writel(wrp, 0xff, PWRAP_STAUPD_GRPEN);
>
> - if (pwrap_is_mt8135(wrp)) {
> - /* enable pwrap events and pwrap bridge in AP side */
> - pwrap_writel(wrp, 0x1, PWRAP_EVENT_IN_EN);
> - pwrap_writel(wrp, 0xffff, PWRAP_EVENT_DST_EN);
> - writel(0x7f, wrp->bridge_base + PWRAP_MT8135_BRIDGE_IORD_ARB_EN);
> - writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WACS3_EN);
> - writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WACS4_EN);
> - writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WDT_UNIT);
> - writel(0xffff, wrp->bridge_base + PWRAP_MT8135_BRIDGE_WDT_SRC_EN);
> - writel(0x1, wrp->bridge_base + PWRAP_MT8135_BRIDGE_TIMER_EN);
> - writel(0x7ff, wrp->bridge_base + PWRAP_MT8135_BRIDGE_INT_EN);
> -
> - /* enable PMIC event out and sources */
> - if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) ||
> - pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) {
> - dev_err(wrp->dev, "enable dewrap fail\n");
> - return -EFAULT;
> - }
> - } else {
> - /* PMIC_DEWRAP enables */
> - if (pwrap_write(wrp, PWRAP_DEW_EVENT_OUT_EN, 0x1) ||
> - pwrap_write(wrp, PWRAP_DEW_EVENT_SRC_EN, 0xffff)) {
> - dev_err(wrp->dev, "enable dewrap fail\n");
> - return -EFAULT;
> - }
> + if (wrp->master->init_special) {
> + ret = wrp->master->init_special(wrp);
> + if (ret)
> + return ret;
> }
>
> /* Setup the init done registers */
> @@ -811,6 +826,7 @@ static struct pmic_wrapper_type pwrap_mt8135 = {
> .type = PWRAP_MT8135,
> .arb_en_all = 0x1ff,
> .init_reg_clock = pwrap_mt8135_init_reg_clock,
> + .init_special = pwrap_mt8135_init_special,
> };
>
> static struct pmic_wrapper_type pwrap_mt8173 = {
> @@ -818,6 +834,7 @@ static struct pmic_wrapper_type pwrap_mt8173 = {
> .type = PWRAP_MT8173,
> .arb_en_all = 0x3f,
> .init_reg_clock = pwrap_mt8173_init_reg_clock,
> + .init_special = pwrap_mt8173_init_special,
> };
>
> static struct of_device_id of_pwrap_match_tbl[] = {
>
next prev parent reply other threads:[~2016-02-11 11:54 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-07 10:42 [PATCH V5 00/11] soc: mediatek: PMIC wrap: add MT6323/2701/7623 support John Crispin
2016-02-07 10:42 ` [PATCH V5 01/11] dt-bindings: ARM: Mediatek: add MT2701/7623 string to the PMIC wrapper doc John Crispin
2016-02-07 10:42 ` [PATCH V5 02/11] soc: mediatek: PMIC wrap: don't duplicate the wrapper data John Crispin
2016-02-07 10:42 ` [PATCH V5 03/11] soc: mediatek: PMIC wrap: add wrapper callbacks for init_reg_clock John Crispin
2016-02-07 10:42 ` [PATCH V5 04/11] soc: mediatek: PMIC wrap: split SoC specific init into callback John Crispin
2016-02-11 11:54 ` Matthias Brugger [this message]
2016-02-14 21:01 ` John Crispin
2016-02-17 16:55 ` Matthias Brugger
2016-02-07 10:42 ` [PATCH V5 05/11] soc: mediatek: PMIC wrap: WRAP_INT_EN needs a different bitmask for MT2701/7623 John Crispin
2016-02-07 10:42 ` [PATCH V5 06/11] soc: mediatek: PMIC wrap: SPI_WRITE " John Crispin
2016-02-11 11:59 ` Matthias Brugger
2016-02-07 10:42 ` [PATCH V5 07/11] soc: mediatek: PMIC wrap: move wdt_src into the pmic_wrapper_type struct John Crispin
2016-02-11 12:00 ` Matthias Brugger
2016-02-07 10:42 ` [PATCH V5 08/11] soc: mediatek: PMIC wrap: remove pwrap_is_mt8135() and pwrap_is_mt8173() John Crispin
2016-02-11 12:01 ` Matthias Brugger
2016-02-07 10:42 ` [PATCH V5 09/11] soc: mediatek: PMIC wrap: add a slave specific struct John Crispin
2016-02-11 11:25 ` Matthias Brugger
2016-02-07 10:42 ` [PATCH V5 10/11] soc: mediatek: PMIC wrap: add mt6323 slave support John Crispin
2016-02-11 11:27 ` Matthias Brugger
2016-02-07 10:42 ` [PATCH V5 11/11] soc: mediatek: PMIC wrap: add MT2701/7623 support John Crispin
2016-02-11 11:41 ` Matthias Brugger
2016-02-11 11:46 ` [PATCH V5 00/11] soc: mediatek: PMIC wrap: add MT6323/2701/7623 support Matthias Brugger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56BC7674.9030706@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).