From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/5] Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular"
Date: Wed, 17 Feb 2016 18:19:01 +0100 [thread overview]
Message-ID: <56C4AB85.7010708@gmail.com> (raw)
In-Reply-To: <1455721357-4008289-2-git-send-email-arnd@arndb.de>
On 17/02/16 16:02, Arnd Bergmann wrote:
> This reverts commit d72d391c126e ("drivers/tty/serial: make
> 8250/8250_mtk.c explicitly non-modular"), which intended to remove dead
> code but did not have the desired effect when the main 8250 driver was
> a module itself.
>
> This would normally result in a link error, but as the entire
> drivers/tty/serial/8250/ directory is only entered when CONFIG_SERIAL_8250
> is set, we never notice that the driver does not get built in this
> configuration.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Acked-by: Matthias Brugger <matthias.bgg@gmail.com>
> drivers/tty/serial/8250/8250_mtk.c | 35 ++++++++++++++++++++++++++++-------
> 1 file changed, 28 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
> index 9038843cadc7..6ecc6e3e82dc 100644
> --- a/drivers/tty/serial/8250/8250_mtk.c
> +++ b/drivers/tty/serial/8250/8250_mtk.c
> @@ -16,7 +16,7 @@
> */
> #include <linux/clk.h>
> #include <linux/io.h>
> -#include <linux/init.h>
> +#include <linux/module.h>
> #include <linux/of_irq.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> @@ -245,6 +245,23 @@ static int mtk8250_probe(struct platform_device *pdev)
> return 0;
> }
>
> +static int mtk8250_remove(struct platform_device *pdev)
> +{
> + struct mtk8250_data *data = platform_get_drvdata(pdev);
> +
> + pm_runtime_get_sync(&pdev->dev);
> +
> + serial8250_unregister_port(data->line);
> +
> + pm_runtime_disable(&pdev->dev);
> + pm_runtime_put_noidle(&pdev->dev);
> +
> + if (!pm_runtime_status_suspended(&pdev->dev))
> + mtk8250_runtime_suspend(&pdev->dev);
> +
> + return 0;
> +}
> +
> static int __maybe_unused mtk8250_suspend(struct device *dev)
> {
> struct mtk8250_data *data = dev_get_drvdata(dev);
> @@ -273,18 +290,18 @@ static const struct of_device_id mtk8250_of_match[] = {
> { .compatible = "mediatek,mt6577-uart" },
> { /* Sentinel */ }
> };
> +MODULE_DEVICE_TABLE(of, mtk8250_of_match);
>
> static struct platform_driver mtk8250_platform_driver = {
> .driver = {
> - .name = "mt6577-uart",
> - .pm = &mtk8250_pm_ops,
> - .of_match_table = mtk8250_of_match,
> - .suppress_bind_attrs = true,
> -
> + .name = "mt6577-uart",
> + .pm = &mtk8250_pm_ops,
> + .of_match_table = mtk8250_of_match,
> },
> .probe = mtk8250_probe,
> + .remove = mtk8250_remove,
> };
> -builtin_platform_driver(mtk8250_platform_driver);
> +module_platform_driver(mtk8250_platform_driver);
>
> #ifdef CONFIG_SERIAL_8250_CONSOLE
> static int __init early_mtk8250_setup(struct earlycon_device *device,
> @@ -300,3 +317,7 @@ static int __init early_mtk8250_setup(struct earlycon_device *device,
>
> OF_EARLYCON_DECLARE(mtk8250, "mediatek,mt6577-uart", early_mtk8250_setup);
> #endif
> +
> +MODULE_AUTHOR("Matthias Brugger");
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("Mediatek 8250 serial port driver");
>
next prev parent reply other threads:[~2016-02-17 17:19 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-17 15:02 [PATCH v3 0/5] serial: 8250: fixes for modular build Arnd Bergmann
2016-02-17 15:02 ` [PATCH v3 1/5] Revert "drivers/tty/serial: make 8250/8250_mtk.c explicitly non-modular" Arnd Bergmann
2016-02-17 17:19 ` Matthias Brugger [this message]
2016-02-17 15:02 ` [PATCH v3 2/5] Revert "drivers/tty/serial: make 8250/8250_ingenic.c " Arnd Bergmann
2016-02-17 15:02 ` [PATCH v3 3/5] serial: 8250/uniphier: fix modular build Arnd Bergmann
2016-02-17 15:02 ` [PATCH v3 4/5] serial: 8250/ingenic: fix building with SERIAL_8250=m Arnd Bergmann
2016-02-17 15:02 ` [PATCH v3 5/5] serial: 8250/mediatek: " Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56C4AB85.7010708@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).