[PATCH v5 07/15] arm64: Change cpu_resume() to enable mmu early then access sleep_sp by va

[james.morse@arm.com (James Morse)]

Hi Lorenzo,

On 18/02/16 18:26, Lorenzo Pieralisi wrote:
> On Tue, Feb 16, 2016 at 03:49:19PM +0000, James Morse wrote:
>> By enabling the MMU early in cpu_resume(), the sleep_save_sp and stack can
>> be accessed by VA, which avoids the need to convert-addresses and clean to
>> PoC on the suspend path.
>>
>> MMU setup is shared with the boot path, meaning the swapper_pg_dir is
>> restored directly: ttbr1_el1 is no longer saved/restored.
>>
>> struct sleep_save_sp is removed, replacing it with a single array of
>> pointers.
>>
>> cpu_do_{suspend,resume} could be further reduced to not restore: cpacr_el1,
>> mdscr_el1, tcr_el1, vbar_el1 and sctlr_el1, all of which are set by
>> __cpu_setup(). However these values all contain res0 bits that may be used
>> to enable future features.
>>
>> Signed-off-by: James Morse <james.morse@arm.com>
>> ---
> 
> [...]
> 
>> diff --git a/arch/arm64/kernel/sleep.S b/arch/arm64/kernel/sleep.S
>> index dca81612fe90..0e2b36f1fb44 100644
>> --- a/arch/arm64/kernel/sleep.S
>> +++ b/arch/arm64/kernel/sleep.S
>> @@ -73,8 +73,8 @@ ENTRY(__cpu_suspend_enter)
>>  	str	x2, [x0, #SLEEP_STACK_DATA_SYSTEM_REGS + CPU_CTX_SP]
>>  
>>  	/* find the mpidr_hash */
>> -	ldr	x1, =sleep_save_sp
>> -	ldr	x1, [x1, #SLEEP_SAVE_SP_VIRT]
>> +	ldr	x1, =sleep_save_stash
>> +	ldr	x1, [x1]
>>  	mrs	x7, mpidr_el1
>>  	ldr	x9, =mpidr_hash
>>  	ldr	x10, [x9, #MPIDR_HASH_MASK]
>> @@ -87,40 +87,26 @@ ENTRY(__cpu_suspend_enter)
>>  	compute_mpidr_hash x8, x3, x4, x5, x6, x7, x10
>>  	add	x1, x1, x8, lsl #3
>>  
>> +	str	x0, [x1]
>> +	add	x0, x0, #SLEEP_STACK_DATA_SYSTEM_REGS
> 
> Mmm...this instruction does not really belong in this patch,
> it should be part of patch 6, correct ? What I mean is, the new
> struct to stash system regs (struct sleep_stack_data) was added in
> patch 6, if the offset #SLEEP_STACK_DATA_SYSTEM_REGS (which is 0) had
> to be added it had to be added in patch 6 too, it does not belong
> in this patch, am I right ?

In the previous patch __cpu_suspend_save() was changed to take a struct
sleep_stack_data, this then passes system_regs to cpu_do_suspend(). The 'add	x0,
x0, #SLEEP_STACK_DATA_SYSTEM_REGS' is being done in C, (and hopefully optimised
out by the compiler).

In this patch, we removed __cpu_suspend_save() and call cpu_do_suspend()
directly, so need to account for system_regs's position in struct
sleep_stack_data ourselves.

I'm paranoid, but if you prefer I can remove the 'add 0', and dump a comment
next to the struct definition making it someone elses problem to fix it if they
ever change the layout of the struct...


> 
>>  	push	x29, lr
>> -	bl	__cpu_suspend_save
>> +	bl	cpu_do_suspend
>>  	pop	x29, lr
>>  	mov	x0, #1
>>  	ret
>>  ENDPROC(__cpu_suspend_enter)
>>  	.ltorg

[...2x Nits fixed...]

> With the last updates it seems fine by me, so:
> 
> Reviewed-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>


Thanks!


James