[PATCH v4 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks

[PATCH v4 0/3] ARM: OMAP2+: hwmod: RTC: Add lock and unlock hooks

[Lokesh Vutla]

This series implements lock and unlock functions for RTC and hooks
the same to DRA7 and AMx3xx hwmod.

Tested RTC functionality on:
DRA74-EVM: http://pastebin.ubuntu.com/14885542/
BeagleBoard-X15: http://pastebin.ubuntu.com/14885568/
AM437x-GP EVM: http://pastebin.ubuntu.com/14885589/
AM335x BeagleBoneBlack: http://pastebin.ubuntu.com/14885600/

Changes since v3:
- Rebased on top of latest Mainline.
Link to v3 series: https://www.mail-archive.com/linux-omap%40vger.kernel.org/msg118342.html

Lokesh Vutla (3):
  ARM: hwmod: RTC: Add lock and unlock functions
  ARM: DRA7: RTC: Add lock and unlock functions
  ARM: AMx3xx: RTC: Add lock and unlock functions

 arch/arm/mach-omap2/omap_hwmod.h                   |  2 +
 .../mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c |  2 +
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c          |  2 +
 arch/arm/mach-omap2/omap_hwmod_reset.c             | 65 ++++++++++++++++++++++
 4 files changed, 71 insertions(+)

-- 
2.1.4

[PATCH v4 1/3] ARM: hwmod: RTC: Add lock and unlock functions

[Lokesh Vutla]

RTC IP have kicker feature which prevents spurious writes to its registers.
In order to write into any of the RTC registers, KICK values has to be
written to KICK registers.
Introduce omap_hwmod_rtc_unlock/lock functions, which  writes into these
KICK registers inorder to lock and unlock RTC registers.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod.h       |  2 ++
 arch/arm/mach-omap2/omap_hwmod_reset.c | 65 ++++++++++++++++++++++++++++++++++
 2 files changed, 67 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod.h b/arch/arm/mach-omap2/omap_hwmod.h
index 76bce11..649576e 100644
--- a/arch/arm/mach-omap2/omap_hwmod.h
+++ b/arch/arm/mach-omap2/omap_hwmod.h
@@ -751,6 +751,8 @@ const char *omap_hwmod_get_main_clk(struct omap_hwmod *oh);
  */
 
 extern int omap_hwmod_aess_preprogram(struct omap_hwmod *oh);
+void omap_hwmod_rtc_unlock(struct omap_hwmod *oh);
+void omap_hwmod_rtc_lock(struct omap_hwmod *oh);
 
 /*
  * Chip variant-specific hwmod init routines - XXX should be converted
diff --git a/arch/arm/mach-omap2/omap_hwmod_reset.c b/arch/arm/mach-omap2/omap_hwmod_reset.c
index 65e186c..0e21daa 100644
--- a/arch/arm/mach-omap2/omap_hwmod_reset.c
+++ b/arch/arm/mach-omap2/omap_hwmod_reset.c
@@ -29,6 +29,16 @@
 #include <sound/aess.h>
 
 #include "omap_hwmod.h"
+#include "common.h"
+
+#define OMAP_RTC_STATUS_REG	0x44
+#define OMAP_RTC_KICK0_REG	0x6c
+#define OMAP_RTC_KICK1_REG	0x70
+
+#define OMAP_RTC_KICK0_VALUE	0x83E70B13
+#define OMAP_RTC_KICK1_VALUE	0x95A4F1E0
+#define OMAP_RTC_STATUS_BUSY	BIT(0)
+#define OMAP_RTC_MAX_READY_TIME	50
 
 /**
  * omap_hwmod_aess_preprogram - enable AESS internal autogating
@@ -51,3 +61,58 @@ int omap_hwmod_aess_preprogram(struct omap_hwmod *oh)
 
 	return 0;
 }
+
+/**
+ * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
+ * @oh: struct omap_hwmod *
+ *
+ * For updating certain RTC registers, the MPU must wait
+ * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
+ * Once the BUSY status is zero, there is a 15-?s access
+ * period in which the MPU can program.
+ */
+static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
+{
+	int i;
+
+	/* BUSY may stay active for 1/32768 second (~30 usec) */
+	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
+			  & OMAP_RTC_STATUS_REG, OMAP_RTC_MAX_READY_TIME, i);
+	/* now we have ~15 usec to read/write various registers */
+}
+
+/**
+ * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
+ * @oh: struct omap_hwmod *
+ *
+ * RTC IP have kicker feature. This prevents spurious writes to its registers.
+ * In order to write into any of the RTC registers, KICK values has te be
+ * written in respective KICK registers. This is needed for hwmod to write into
+ * sysconfig register.
+ */
+void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
+{
+	local_irq_disable();
+	omap_rtc_wait_not_busy(oh);
+	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
+	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
+	local_irq_enable();
+}
+
+/**
+ * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
+ * @oh: struct omap_hwmod *
+ *
+ * RTC IP have kicker feature. This prevents spurious writes to its registers.
+ * Once the RTC registers are written, KICK mechanism needs to be locked,
+ * in order to prevent any spurious writes. This function locks back the RTC
+ * registers once hwmod completes its write into sysconfig register.
+ */
+void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
+{
+	local_irq_disable();
+	omap_rtc_wait_not_busy(oh);
+	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
+	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
+	local_irq_enable();
+}
-- 
2.1.4

[PATCH v4 1/3] ARM: hwmod: RTC: Add lock and unlock functions

[Paul Walmsley]

Hi Lokesh

I apologize for the delay.

A few comments:

On Fri, 5 Feb 2016, Lokesh Vutla wrote:

> RTC IP have kicker feature which prevents spurious writes to its registers.
> In order to write into any of the RTC registers, KICK values has to be
> written to KICK registers.
> Introduce omap_hwmod_rtc_unlock/lock functions, which  writes into these
> KICK registers inorder to lock and unlock RTC registers.
> 
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> ---

...

> +/**
> + * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
> + * @oh: struct omap_hwmod *
> + *
> + * For updating certain RTC registers, the MPU must wait
> + * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
> + * Once the BUSY status is zero, there is a 15-?s access

Probably best just to write out "microseconds" or "us" here to avoid the 
high-bit character problem.

> + * period in which the MPU can program.
> + */
> +static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
> +{
> +	int i;
> +
> +	/* BUSY may stay active for 1/32768 second (~30 usec) */
> +	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
> +			  & OMAP_RTC_STATUS_REG, OMAP_RTC_MAX_READY_TIME, i);

This test looks bogus.  Shouldn't it AND the register value with 
OMAP_RTC_STATUS_BUSY?  Right now the code is AND-ing with 0x44, which 
doesn't include the BUSY bit.  So I guess the tests that you mentioned in 
the first message of the series don't cover the BUSY case?

> +	/* now we have ~15 usec to read/write various registers */
> +}
> +
> +/**
> + * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
> + * @oh: struct omap_hwmod *
> + *
> + * RTC IP have kicker feature. This prevents spurious writes to its registers.
> + * In order to write into any of the RTC registers, KICK values has te be
> + * written in respective KICK registers. This is needed for hwmod to write into
> + * sysconfig register.
> + */
> +void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
> +{
> +	local_irq_disable();
> +	omap_rtc_wait_not_busy(oh);
> +	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
> +	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
> +	local_irq_enable();

Finally, could you ask the IP block maintainer to confirm the 
interpretation that, for any STATUS_REG read where the BUSY bit is 0, that 
we are guaranteed to have at least 15 microseconds from that point in time 
to access the IP block?  It appears to be this way from my reading of the 
TRM; but to me, the phrasing is not explicit.  Another interpretation 
could be that the BUSY bit reflects the IP block's current status.  If 
this latter case is true, then to ensure that the IP block accesses 
complete inside the access window, we'll either need to test the BUSY bit 
after the writes to ensure that it is still 0, and otherwise repeat the 
busy test and writes; or we'll need to wait for a 0->1 BUSY transition 
before we wait for a 1->0 BUSY transition.

> +}
> +
> +/**
> + * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
> + * @oh: struct omap_hwmod *
> + *
> + * RTC IP have kicker feature. This prevents spurious writes to its registers.
> + * Once the RTC registers are written, KICK mechanism needs to be locked,
> + * in order to prevent any spurious writes. This function locks back the RTC
> + * registers once hwmod completes its write into sysconfig register.
> + */
> +void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
> +{
> +	local_irq_disable();
> +	omap_rtc_wait_not_busy(oh);
> +	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
> +	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
> +	local_irq_enable();
> +}
> -- 
> 2.1.4
> 


- Paul

[PATCH v4 1/3] ARM: hwmod: RTC: Add lock and unlock functions

[Paul Walmsley]

Hi Lokesh

On Sun, 7 Feb 2016, Paul Walmsley wrote:

> A few comments:
> 
> On Fri, 5 Feb 2016, Lokesh Vutla wrote:
> 
> > RTC IP have kicker feature which prevents spurious writes to its registers.
> > In order to write into any of the RTC registers, KICK values has to be
> > written to KICK registers.
> > Introduce omap_hwmod_rtc_unlock/lock functions, which  writes into these
> > KICK registers inorder to lock and unlock RTC registers.
> > 
> > Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> > ---
> 
> ...
> 
> > +/**
> > + * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
> > + * @oh: struct omap_hwmod *
> > + *
> > + * For updating certain RTC registers, the MPU must wait
> > + * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
> > + * Once the BUSY status is zero, there is a 15-?s access
> 
> Probably best just to write out "microseconds" or "us" here to avoid the 
> high-bit character problem.
> 
> > + * period in which the MPU can program.
> > + */
> > +static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
> > +{
> > +	int i;
> > +
> > +	/* BUSY may stay active for 1/32768 second (~30 usec) */
> > +	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
> > +			  & OMAP_RTC_STATUS_REG, OMAP_RTC_MAX_READY_TIME, i);
> 
> This test looks bogus.  Shouldn't it AND the register value with 
> OMAP_RTC_STATUS_BUSY?  Right now the code is AND-ing with 0x44, which 
> doesn't include the BUSY bit.  So I guess the tests that you mentioned in 
> the first message of the series don't cover the BUSY case?
> 
> > +	/* now we have ~15 usec to read/write various registers */
> > +}
> > +
> > +/**
> > + * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
> > + * @oh: struct omap_hwmod *
> > + *
> > + * RTC IP have kicker feature. This prevents spurious writes to its registers.
> > + * In order to write into any of the RTC registers, KICK values has te be
> > + * written in respective KICK registers. This is needed for hwmod to write into
> > + * sysconfig register.
> > + */
> > +void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
> > +{
> > +	local_irq_disable();
> > +	omap_rtc_wait_not_busy(oh);
> > +	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
> > +	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
> > +	local_irq_enable();
> 
> Finally, could you ask the IP block maintainer to confirm the 
> interpretation that, for any STATUS_REG read where the BUSY bit is 0, that 
> we are guaranteed to have at least 15 microseconds from that point in time 
> to access the IP block?  It appears to be this way from my reading of the 
> TRM; but to me, the phrasing is not explicit.  Another interpretation 
> could be that the BUSY bit reflects the IP block's current status.  If 
> this latter case is true, then to ensure that the IP block accesses 
> complete inside the access window, we'll either need to test the BUSY bit 
> after the writes to ensure that it is still 0, and otherwise repeat the 
> busy test and writes; or we'll need to wait for a 0->1 BUSY transition 
> before we wait for a 1->0 BUSY transition.
> 
> > +}
> > +
> > +/**
> > + * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
> > + * @oh: struct omap_hwmod *
> > + *
> > + * RTC IP have kicker feature. This prevents spurious writes to its registers.
> > + * Once the RTC registers are written, KICK mechanism needs to be locked,
> > + * in order to prevent any spurious writes. This function locks back the RTC
> > + * registers once hwmod completes its write into sysconfig register.
> > + */
> > +void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
> > +{
> > +	local_irq_disable();
> > +	omap_rtc_wait_not_busy(oh);
> > +	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
> > +	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
> > +	local_irq_enable();
> > +}

Any update?


- Paul

[PATCH v4 1/3] ARM: hwmod: RTC: Add lock and unlock functions

[Lokesh Vutla]

Hi Paul,


On 2/18/2016 11:57 AM, Paul Walmsley wrote:
> Hi Lokesh
>
> On Sun, 7 Feb 2016, Paul Walmsley wrote:
>
>> A few comments:
>>
>> On Fri, 5 Feb 2016, Lokesh Vutla wrote:
>>
>>> RTC IP have kicker feature which prevents spurious writes to its registers.
>>> In order to write into any of the RTC registers, KICK values has to be
>>> written to KICK registers.
>>> Introduce omap_hwmod_rtc_unlock/lock functions, which  writes into these
>>> KICK registers inorder to lock and unlock RTC registers.
>>>
>>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>>> ---
>>
>> ...
>>
>>> +/**
>>> + * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
>>> + * @oh: struct omap_hwmod *
>>> + *
>>> + * For updating certain RTC registers, the MPU must wait
>>> + * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
>>> + * Once the BUSY status is zero, there is a 15-?s access
>>
>> Probably best just to write out "microseconds" or "us" here to avoid the
>> high-bit character problem.
>>
>>> + * period in which the MPU can program.
>>> + */
>>> +static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
>>> +{
>>> +	int i;
>>> +
>>> +	/* BUSY may stay active for 1/32768 second (~30 usec) */
>>> +	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
>>> +			  & OMAP_RTC_STATUS_REG, OMAP_RTC_MAX_READY_TIME, i);
>>
>> This test looks bogus.  Shouldn't it AND the register value with
>> OMAP_RTC_STATUS_BUSY?  Right now the code is AND-ing with 0x44, which
>> doesn't include the BUSY bit.  So I guess the tests that you mentioned in
>> the first message of the series don't cover the BUSY case?
>>
>>> +	/* now we have ~15 usec to read/write various registers */
>>> +}
>>> +
>>> +/**
>>> + * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
>>> + * @oh: struct omap_hwmod *
>>> + *
>>> + * RTC IP have kicker feature. This prevents spurious writes to its registers.
>>> + * In order to write into any of the RTC registers, KICK values has te be
>>> + * written in respective KICK registers. This is needed for hwmod to write into
>>> + * sysconfig register.
>>> + */
>>> +void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
>>> +{
>>> +	local_irq_disable();
>>> +	omap_rtc_wait_not_busy(oh);
>>> +	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
>>> +	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
>>> +	local_irq_enable();
>>
>> Finally, could you ask the IP block maintainer to confirm the
>> interpretation that, for any STATUS_REG read where the BUSY bit is 0, that
>> we are guaranteed to have at least 15 microseconds from that point in time
>> to access the IP block?  It appears to be this way from my reading of the
>> TRM; but to me, the phrasing is not explicit.  Another interpretation
>> could be that the BUSY bit reflects the IP block's current status.  If
>> this latter case is true, then to ensure that the IP block accesses
>> complete inside the access window, we'll either need to test the BUSY bit
>> after the writes to ensure that it is still 0, and otherwise repeat the
>> busy test and writes; or we'll need to wait for a 0->1 BUSY transition
>> before we wait for a 1->0 BUSY transition.
>>
>>> +}
>>> +
>>> +/**
>>> + * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
>>> + * @oh: struct omap_hwmod *
>>> + *
>>> + * RTC IP have kicker feature. This prevents spurious writes to its registers.
>>> + * Once the RTC registers are written, KICK mechanism needs to be locked,
>>> + * in order to prevent any spurious writes. This function locks back the RTC
>>> + * registers once hwmod completes its write into sysconfig register.
>>> + */
>>> +void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
>>> +{
>>> +	local_irq_disable();
>>> +	omap_rtc_wait_not_busy(oh);
>>> +	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
>>> +	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
>>> +	local_irq_enable();
>>> +}
>
> Any update?


Sorry for the delay, I am on a vacation right now. I have already sent
a mail to the HW guys. Will update you as soon as I receive a reply
from them.

Thanks and regards,
Lokesh

>
>
> - Paul
>

[PATCH v4 1/3] ARM: hwmod: RTC: Add lock and unlock functions

[Paul Walmsley]

On Thu, 18 Feb 2016, Lokesh Vutla wrote:

> Sorry for the delay, I am on a vacation right now. I have already sent
> a mail to the HW guys. Will update you as soon as I receive a reply
> from them.

Got it; thanks Lokesh.


- Paul

[PATCH v4 1/3] ARM: hwmod: RTC: Add lock and unlock functions

[Lokesh Vutla]

Hi Paul,

On Monday 08 February 2016 03:54 AM, Paul Walmsley wrote:
> Hi Lokesh
> 
> I apologize for the delay.
> 
> A few comments:
> 
> On Fri, 5 Feb 2016, Lokesh Vutla wrote:
> 
>> RTC IP have kicker feature which prevents spurious writes to its registers.
>> In order to write into any of the RTC registers, KICK values has to be
>> written to KICK registers.
>> Introduce omap_hwmod_rtc_unlock/lock functions, which  writes into these
>> KICK registers inorder to lock and unlock RTC registers.
>>
>> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
>> ---
> 
> ...
> 
>> +/**
>> + * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
>> + * @oh: struct omap_hwmod *
>> + *
>> + * For updating certain RTC registers, the MPU must wait
>> + * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
>> + * Once the BUSY status is zero, there is a 15-?s access
> 
> Probably best just to write out "microseconds" or "us" here to avoid the 
> high-bit character problem.
> 
>> + * period in which the MPU can program.
>> + */
>> +static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
>> +{
>> +	int i;
>> +
>> +	/* BUSY may stay active for 1/32768 second (~30 usec) */
>> +	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
>> +			  & OMAP_RTC_STATUS_REG, OMAP_RTC_MAX_READY_TIME, i);
> 
> This test looks bogus.  Shouldn't it AND the register value with 
> OMAP_RTC_STATUS_BUSY?  Right now the code is AND-ing with 0x44, which 
> doesn't include the BUSY bit.  So I guess the tests that you mentioned in 
> the first message of the series don't cover the BUSY case?
> 
>> +	/* now we have ~15 usec to read/write various registers */
>> +}
>> +
>> +/**
>> + * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
>> + * @oh: struct omap_hwmod *
>> + *
>> + * RTC IP have kicker feature. This prevents spurious writes to its registers.
>> + * In order to write into any of the RTC registers, KICK values has te be
>> + * written in respective KICK registers. This is needed for hwmod to write into
>> + * sysconfig register.
>> + */
>> +void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
>> +{
>> +	local_irq_disable();
>> +	omap_rtc_wait_not_busy(oh);
>> +	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
>> +	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
>> +	local_irq_enable();
> 
> Finally, could you ask the IP block maintainer to confirm the 
> interpretation that, for any STATUS_REG read where the BUSY bit is 0, that 
> we are guaranteed to have at least 15 microseconds from that point in time 
> to access the IP block?  It appears to be this way from my reading of the 
> TRM; but to me, the phrasing is not explicit.  Another interpretation 
> could be that the BUSY bit reflects the IP block's current status.  If 
> this latter case is true, then to ensure that the IP block accesses 
> complete inside the access window, we'll either need to test the BUSY bit 
> after the writes to ensure that it is still 0, and otherwise repeat the 
> busy test and writes; or we'll need to wait for a 0->1 BUSY transition 
> before we wait for a 1->0 BUSY transition.

As per the HW folks, once SW sees the transistion from 1->0, it is
guaranteed that SW has 15.25 us to do all the write transactions for all
the TC updates.

Also as per TRM, in RTC there are three types of registers:
-> TC registers and TC alarm registers:
-> General registers
-> Compensation registers.

MPU must wait for the BUSY bit for accessing the TC registers and  MPU
can access the general registers at any point of time. SYSCONFIG, KICK
registers comes under general registers. Since hwmod modifies only the
sysconfig register, this omap_rtc_wait_not_busy() is not required here.
We can directly write into sysconfig and KICK registers. Does this sound
fine to you?
Shall I resend this patch without omap_rtc_wait_not_busy()?


Thanks and regards,
Lokesh


> 
>> +}
>> +
>> +/**
>> + * omap_hwmod_rtc_lock - Lock the Kicker mechanism.
>> + * @oh: struct omap_hwmod *
>> + *
>> + * RTC IP have kicker feature. This prevents spurious writes to its registers.
>> + * Once the RTC registers are written, KICK mechanism needs to be locked,
>> + * in order to prevent any spurious writes. This function locks back the RTC
>> + * registers once hwmod completes its write into sysconfig register.
>> + */
>> +void omap_hwmod_rtc_lock(struct omap_hwmod *oh)
>> +{
>> +	local_irq_disable();
>> +	omap_rtc_wait_not_busy(oh);
>> +	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK0_REG);
>> +	omap_hwmod_write(0x0, oh, OMAP_RTC_KICK1_REG);
>> +	local_irq_enable();
>> +}
>> -- 
>> 2.1.4
>>
> 
> 
> - Paul
> 

[PATCH v4 1/3] ARM: hwmod: RTC: Add lock and unlock functions

[Paul Walmsley]

Lokesh,

On Wed, 24 Feb 2016, Lokesh Vutla wrote:

> On Monday 08 February 2016 03:54 AM, Paul Walmsley wrote:
> > On Fri, 5 Feb 2016, Lokesh Vutla wrote:
> > 
> >> RTC IP have kicker feature which prevents spurious writes to its registers.
> >> In order to write into any of the RTC registers, KICK values has to be
> >> written to KICK registers.
> >> Introduce omap_hwmod_rtc_unlock/lock functions, which  writes into these
> >> KICK registers inorder to lock and unlock RTC registers.
> >>
> >> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> >> ---
> > 
> > ...
> > 
> >> +/**
> >> + * omap_rtc_wait_not_busy - Wait for the RTC BUSY flag
> >> + * @oh: struct omap_hwmod *
> >> + *
> >> + * For updating certain RTC registers, the MPU must wait
> >> + * for the BUSY status in OMAP_RTC_STATUS_REG to become zero.
> >> + * Once the BUSY status is zero, there is a 15-?s access
> > 
> > Probably best just to write out "microseconds" or "us" here to avoid the 
> > high-bit character problem.
> > 
> >> + * period in which the MPU can program.
> >> + */
> >> +static void omap_rtc_wait_not_busy(struct omap_hwmod *oh)
> >> +{
> >> +	int i;
> >> +
> >> +	/* BUSY may stay active for 1/32768 second (~30 usec) */
> >> +	omap_test_timeout(omap_hwmod_read(oh, OMAP_RTC_STATUS_REG)
> >> +			  & OMAP_RTC_STATUS_REG, OMAP_RTC_MAX_READY_TIME, i);
> > 
> > This test looks bogus.  Shouldn't it AND the register value with 
> > OMAP_RTC_STATUS_BUSY?  Right now the code is AND-ing with 0x44, which 
> > doesn't include the BUSY bit.  So I guess the tests that you mentioned in 
> > the first message of the series don't cover the BUSY case?
> > 
> >> +	/* now we have ~15 usec to read/write various registers */
> >> +}
> >> +
> >> +/**
> >> + * omap_hwmod_rtc_unlock - Unlock the Kicker mechanism.
> >> + * @oh: struct omap_hwmod *
> >> + *
> >> + * RTC IP have kicker feature. This prevents spurious writes to its registers.
> >> + * In order to write into any of the RTC registers, KICK values has te be
> >> + * written in respective KICK registers. This is needed for hwmod to write into
> >> + * sysconfig register.
> >> + */
> >> +void omap_hwmod_rtc_unlock(struct omap_hwmod *oh)
> >> +{
> >> +	local_irq_disable();
> >> +	omap_rtc_wait_not_busy(oh);
> >> +	omap_hwmod_write(OMAP_RTC_KICK0_VALUE, oh, OMAP_RTC_KICK0_REG);
> >> +	omap_hwmod_write(OMAP_RTC_KICK1_VALUE, oh, OMAP_RTC_KICK1_REG);
> >> +	local_irq_enable();
> > 
> > Finally, could you ask the IP block maintainer to confirm the 
> > interpretation that, for any STATUS_REG read where the BUSY bit is 0, that 
> > we are guaranteed to have at least 15 microseconds from that point in time 
> > to access the IP block?  It appears to be this way from my reading of the 
> > TRM; but to me, the phrasing is not explicit.  Another interpretation 
> > could be that the BUSY bit reflects the IP block's current status.  If 
> > this latter case is true, then to ensure that the IP block accesses 
> > complete inside the access window, we'll either need to test the BUSY bit 
> > after the writes to ensure that it is still 0, and otherwise repeat the 
> > busy test and writes; or we'll need to wait for a 0->1 BUSY transition 
> > before we wait for a 1->0 BUSY transition.
> 
> As per the HW folks, once SW sees the transistion from 1->0, it is
> guaranteed that SW has 15.25 us to do all the write transactions for all
> the TC updates.

Great

> Also as per TRM, in RTC there are three types of registers:
> -> TC registers and TC alarm registers:
> -> General registers
> -> Compensation registers.
> 
> MPU must wait for the BUSY bit for accessing the TC registers and  MPU
> can access the general registers at any point of time. SYSCONFIG, KICK
> registers comes under general registers. Since hwmod modifies only the
> sysconfig register, this omap_rtc_wait_not_busy() is not required here.
> We can directly write into sysconfig and KICK registers. Does this sound
> fine to you?
> Shall I resend this patch without omap_rtc_wait_not_busy()?

If there's no need for the unlock/lock sequence to ensure that the IP 
block is completely reset, then there doesn't seem to be much point in 
including it?  


- Paul

[PATCH v4 2/3] ARM: DRA7: RTC: Add lock and unlock functions

[Lokesh Vutla]

Hook omap_hwmod_rtc_unlock/lock functions into RTC hwmod,
so that SYSCONFIG register is updated properly

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
index 848356e..6625650 100644
--- a/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_7xx_data.c
@@ -1609,6 +1609,8 @@ static struct omap_hwmod_class_sysconfig dra7xx_rtcss_sysc = {
 static struct omap_hwmod_class dra7xx_rtcss_hwmod_class = {
 	.name	= "rtcss",
 	.sysc	= &dra7xx_rtcss_sysc,
+	.unlock	= &omap_hwmod_rtc_unlock,
+	.lock	= &omap_hwmod_rtc_lock,
 };
 
 /* rtcss */
-- 
2.1.4

[PATCH v4 3/3] ARM: AMx3xx: RTC: Add lock and unlock functions

[Lokesh Vutla]

Hook omap_hwmod_rtc_unlock/lock functions into RTC hwmod,
so that SYSCONFIG register is updated properly.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
index 907a452b..aed3362 100644
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_43xx_ipblock_data.c
@@ -918,6 +918,8 @@ static struct omap_hwmod_class_sysconfig am33xx_rtc_sysc = {
 static struct omap_hwmod_class am33xx_rtc_hwmod_class = {
 	.name		= "rtc",
 	.sysc		= &am33xx_rtc_sysc,
+	.unlock		= &omap_hwmod_rtc_unlock,
+	.lock		= &omap_hwmod_rtc_lock,
 };
 
 struct omap_hwmod am33xx_rtc_hwmod = {
-- 
2.1.4