From: afaerber@suse.de (Andreas Färber)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/8] ARM64: dts: amlogic: Add Tronsmart Vega S95 configs
Date: Tue, 1 Mar 2016 00:55:38 +0100 [thread overview]
Message-ID: <56D4DA7A.6020805@suse.de> (raw)
In-Reply-To: <1456789465-2962-7-git-send-email-afaerber@suse.de>
Am 01.03.2016 um 00:44 schrieb Andreas F?rber:
> diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> new file mode 100644
> index 000000000000..f8c78beb4376
> --- /dev/null
> +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi
> @@ -0,0 +1,73 @@
[...]
> +#include "meson-gxbb.dtsi"
> +
> +/ {
> + compatible = "tronsmart,vega-s95", "amlogic,meson-gxbb";
> +
> + aliases {
> + serial0 = &uart_AO;
> + serial1 = &uart_A;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + soc {
> + uart_A: serial at c11084c0 {
> + compatible = "amlogic,meson-uart";
> + reg = <0x0 0xc11084c0 0x0 0x14>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&xtal>;
> + status = "disabled";
> + };
> +
> + uart_AO: serial at c81004c0 {
> + compatible = "amlogic,meson-uart";
> + reg = <0x0 0xc81004c0 0x0 0x14>;
> + interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
> + clocks = <&xtal>;
> + };
Doh. These two nodes and their aliases should probably go into
meson-gxbb.dtsi (3/8).
> + };
> +};
Regards,
Andreas
--
SUSE Linux GmbH, Maxfeldstr. 5, 90409 N?rnberg, Germany
GF: Felix Imend?rffer, Jane Smithard, Graham Norton; HRB 21284 (AG N?rnberg)
next prev parent reply other threads:[~2016-02-29 23:55 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-29 23:44 [PATCH 0/8] ARM64: meson: GXBaby (S905) and Vega S95 enablement Andreas Färber
2016-02-29 23:44 ` [PATCH 1/8] ARM64: Enable Amlogic Meson GXBaby platform Andreas Färber
2016-03-01 14:43 ` Sudeep Holla
2016-03-01 15:26 ` Andreas Färber
2016-03-01 16:07 ` Sudeep Holla
2016-02-29 23:44 ` [PATCH 2/8] Documentation: devicetree: amlogic: Document Meson GXBaby Andreas Färber
2016-02-29 23:44 ` [PATCH 3/8] ARM64: dts: Prepare configs for Amlogic " Andreas Färber
2016-03-01 14:43 ` Sudeep Holla
2016-03-01 15:18 ` Andreas Färber
2016-03-01 16:19 ` Sudeep Holla
2016-02-29 23:44 ` [PATCH 4/8] Documentation: devicetree: Document Tronsmart vendor prefix Andreas Färber
2016-03-01 11:37 ` Matthias Brugger
2016-03-01 11:53 ` Andreas Färber
2016-03-01 13:29 ` Matthias Brugger
2016-03-01 19:23 ` Beniamino Galvani
2016-03-03 23:57 ` Rob Herring
2016-02-29 23:44 ` [PATCH 5/8] Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards Andreas Färber
2016-02-29 23:44 ` [PATCH 6/8] ARM64: dts: amlogic: Add Tronsmart Vega S95 configs Andreas Färber
2016-02-29 23:55 ` Andreas Färber [this message]
2016-02-29 23:44 ` [PATCH 7/8] ARM64: dts: amlogic: Extend GXBaby GIC node Andreas Färber
2016-03-01 11:01 ` Andre Przywara
2016-03-01 11:18 ` Andreas Färber
2016-03-01 11:42 ` Matthias Brugger
2016-03-01 12:43 ` Andre Przywara
2016-03-01 12:53 ` Carlo Caione
2016-03-01 14:16 ` Andre Przywara
2016-03-01 22:46 ` Andreas Färber
2016-03-01 22:58 ` André Przywara
2016-03-01 23:31 ` Andreas Färber
2016-03-02 0:03 ` André Przywara
2016-03-02 0:07 ` Andreas Färber
2016-02-29 23:44 ` [PATCH 8/8] ARM64: dts: amlogic: Add arch timer node for Meson GXBaby Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D4DA7A.6020805@suse.de \
--to=afaerber@suse.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).