From mboxrd@z Thu Jan 1 00:00:00 1970 From: mcoquelin.stm32@gmail.com (Maxime Coquelin) Date: Tue, 1 Mar 2016 18:39:21 +0100 Subject: [PATCH v2 0/4] Add Ethernet support on STM32F429 In-Reply-To: <1456240244-10275-1-git-send-email-alexandre.torgue@gmail.com> References: <1456240244-10275-1-git-send-email-alexandre.torgue@gmail.com> Message-ID: <56D5D3C9.9070104@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Alex, On 02/23/2016 04:10 PM, Alexandre TORGUE wrote: > STM32F429 Chip embeds a Synopsys 3.50a MAC IP. > This series: > -enhance current stmmac driver to control it (code already > available) and adds basic glue for STM32F429 chip. > -Enable basic Net config in kernel. > > Note that DT patches are not present because STM32 pinctrl code is not > yet avalaible. > > Changes since v1: > -Fix Kbuild issue in Kconfig. > -Remove init/exit callbacks. Suspend/Resume and remove driver is no more > driven in stmmac_pltfr but directly in dwmac-stm32 glue driver. > -Take into account Joachim review. > > Regards. > > Alexandre. > > Alexandre TORGUE (4): > net: ethernet: dwmac: add Ethernet glue logic for stm32 chip > Documentation: Bindings: Add STM32 DWMAC glue > net: ethernet: stmmac: add support of Synopsys 3.50a MAC IP > ARM: STM32: Enable Ethernet in stm32_defconfig > > .../devicetree/bindings/net/stm32-dwmac.txt | 41 ++++ > arch/arm/configs/stm32_defconfig | 9 + > drivers/net/ethernet/stmicro/stmmac/Kconfig | 12 ++ > drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + > drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 208 +++++++++++++++++++++ > .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + > 6 files changed, 272 insertions(+) > create mode 100644 Documentation/devicetree/bindings/net/stm32-dwmac.txt > create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c > You can add my: Tested-by: Maxime Coquelin Thanks! Maxime