From: andre.przywara@arm.com (André Przywara)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/8] ARM64: dts: amlogic: Extend GXBaby GIC node
Date: Tue, 1 Mar 2016 22:58:42 +0000 [thread overview]
Message-ID: <56D61EA2.8090103@arm.com> (raw)
In-Reply-To: <56D61BE3.90505@suse.de>
On 01/03/16 22:46, Andreas F?rber wrote:
> Am 01.03.2016 um 13:43 schrieb Andre Przywara:
>> On 01/03/16 11:18, Andreas F?rber wrote:
>>> Am 01.03.2016 um 12:01 schrieb Andre Przywara:
>>>> On 29/02/16 23:44, Andreas F?rber wrote:
>>>>> reg = <0x0 0xc4301000 0 0x1000>,
>>>>> - <0x0 0xc4302000 0 0x0100>;
>>>>> + <0x0 0xc4302000 0 0x0100>,
>>>>
>>>> Please use 0x2000 for the size here. I guess this is really the GIC-400
>>>> from ARM, and in this case this is the right size, [1] is the reference
>>>> here. This will enable EOI mode 1 for KVM.
>>>
>>> Will test later.
>>>
>>> Is there any easy way to find out whether or not this is that GIC-400?
>>
>> If you can read registers: GICD_IIDR and PIDRx have some info:
>> http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0471b/CHDIFAEE.html
>> So if your U-Boot for instance supports md, a dump of:
>> md.l c4301008 1
>> md.l c4301fd0 30
>>
>> would help to identify the GIC.
>
> gxb_p200_v1#md.l c4301008 1
> c4301008: 0200143b ;...
> gxb_p200_v1#md.l c4301fd0 30
> c4301fd0: 00000004 00000000 00000000 00000000 ................
> c4301fe0: 00000090 000000b4 0000002b 00000000 ........+.......
> c4301ff0: 0000000d 000000f0 00000005 000000b1 ................
> c4302000: 00000060 000000f0 00000003 000003ff `...............
> c4302010: 00000000 000000ff 000003ff 00000000 ................
> c4302020: 00000000 00000000 00000000 00000000 ................
> c4302030: 00000000 00000000 00000000 00000000 ................
> c4302040: 00000000 00000000 00000000 00000000 ................
> c4302050: 00000000 00000000 00000000 00000000 ................
> c4302060: 00000000 00000000 00000000 00000000 ................
> c4302070: 00000000 00000000 00000000 00000000 ................
> c4302080: 00000000 00000000 00000000 00000000 ................
Yes, that matches exactly the values from the GIC-400 TRM.
Thanks!
Andre.
next prev parent reply other threads:[~2016-03-01 22:58 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-02-29 23:44 [PATCH 0/8] ARM64: meson: GXBaby (S905) and Vega S95 enablement Andreas Färber
2016-02-29 23:44 ` [PATCH 1/8] ARM64: Enable Amlogic Meson GXBaby platform Andreas Färber
2016-03-01 14:43 ` Sudeep Holla
2016-03-01 15:26 ` Andreas Färber
2016-03-01 16:07 ` Sudeep Holla
2016-02-29 23:44 ` [PATCH 2/8] Documentation: devicetree: amlogic: Document Meson GXBaby Andreas Färber
2016-02-29 23:44 ` [PATCH 3/8] ARM64: dts: Prepare configs for Amlogic " Andreas Färber
2016-03-01 14:43 ` Sudeep Holla
2016-03-01 15:18 ` Andreas Färber
2016-03-01 16:19 ` Sudeep Holla
2016-02-29 23:44 ` [PATCH 4/8] Documentation: devicetree: Document Tronsmart vendor prefix Andreas Färber
2016-03-01 11:37 ` Matthias Brugger
2016-03-01 11:53 ` Andreas Färber
2016-03-01 13:29 ` Matthias Brugger
2016-03-01 19:23 ` Beniamino Galvani
2016-03-03 23:57 ` Rob Herring
2016-02-29 23:44 ` [PATCH 5/8] Documentation: devicetree: amlogic: Document Tronsmart Vega S95 boards Andreas Färber
2016-02-29 23:44 ` [PATCH 6/8] ARM64: dts: amlogic: Add Tronsmart Vega S95 configs Andreas Färber
2016-02-29 23:55 ` Andreas Färber
2016-02-29 23:44 ` [PATCH 7/8] ARM64: dts: amlogic: Extend GXBaby GIC node Andreas Färber
2016-03-01 11:01 ` Andre Przywara
2016-03-01 11:18 ` Andreas Färber
2016-03-01 11:42 ` Matthias Brugger
2016-03-01 12:43 ` Andre Przywara
2016-03-01 12:53 ` Carlo Caione
2016-03-01 14:16 ` Andre Przywara
2016-03-01 22:46 ` Andreas Färber
2016-03-01 22:58 ` André Przywara [this message]
2016-03-01 23:31 ` Andreas Färber
2016-03-02 0:03 ` André Przywara
2016-03-02 0:07 ` Andreas Färber
2016-02-29 23:44 ` [PATCH 8/8] ARM64: dts: amlogic: Add arch timer node for Meson GXBaby Andreas Färber
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D61EA2.8090103@arm.com \
--to=andre.przywara@arm.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).