From: matthias.bgg@gmail.com (Matthias Brugger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/6] usb: xhci-mtk: use __maybe_unused to hide pm functions
Date: Fri, 4 Mar 2016 17:33:50 +0100 [thread overview]
Message-ID: <56D9B8EE.3060107@gmail.com> (raw)
In-Reply-To: <1456932255-71725-3-git-send-email-arnd@arndb.de>
On 02/03/16 16:24, Arnd Bergmann wrote:
> The mediatek XHCI glue driver uses SET_SYSTEM_SLEEP_PM_OPS() to
> conditionally set the correct suspend/resume options, and
> also puts both the dev_pm_ops and the functions inside of
> an #ifdef testing for CONFIG_PM_SLEEP, but those functions
> then call other code that becomes unused:
>
> drivers/usb/host/xhci-mtk.c:135:12: error: 'xhci_mtk_host_disable' defined but not used [-Werror=unused-function]
> drivers/usb/host/xhci-mtk.c:313:13: error: 'usb_wakeup_enable' defined but not used [-Werror=unused-function]
> drivers/usb/host/xhci-mtk.c:321:13: error: 'usb_wakeup_disable' defined but not used [-Werror=unused-function]
>
> This replaces the #ifdef with __maybe_unused annotations so the
> compiler knows it can silently drop them instead of warning.
>
> For the DEV_PM_OPS definition, we can use an IS_ENABLED() check
> to avoid defining the structure when CONFIG_PM is not set without
> the #ifdef.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
> ---
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
> drivers/usb/host/xhci-mtk.c | 10 +++-------
> 1 file changed, 3 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/usb/host/xhci-mtk.c b/drivers/usb/host/xhci-mtk.c
> index 9532f5aef71b..79959f17c38c 100644
> --- a/drivers/usb/host/xhci-mtk.c
> +++ b/drivers/usb/host/xhci-mtk.c
> @@ -695,7 +695,6 @@ static int xhci_mtk_remove(struct platform_device *dev)
> return 0;
> }
>
> -#ifdef CONFIG_PM_SLEEP
> /*
> * if ip sleep fails, and all clocks are disabled, access register will hang
> * AHB bus, so stop polling roothubs to avoid regs access on bus suspend.
> @@ -703,7 +702,7 @@ static int xhci_mtk_remove(struct platform_device *dev)
> * to wake up system immediately after system suspend complete if ip sleep
> * fails, it is what we wanted.
> */
> -static int xhci_mtk_suspend(struct device *dev)
> +static int __maybe_unused xhci_mtk_suspend(struct device *dev)
> {
> struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
> struct usb_hcd *hcd = mtk->hcd;
> @@ -722,7 +721,7 @@ static int xhci_mtk_suspend(struct device *dev)
> return 0;
> }
>
> -static int xhci_mtk_resume(struct device *dev)
> +static int __maybe_unused xhci_mtk_resume(struct device *dev)
> {
> struct xhci_hcd_mtk *mtk = dev_get_drvdata(dev);
> struct usb_hcd *hcd = mtk->hcd;
> @@ -744,10 +743,7 @@ static int xhci_mtk_resume(struct device *dev)
> static const struct dev_pm_ops xhci_mtk_pm_ops = {
> SET_SYSTEM_SLEEP_PM_OPS(xhci_mtk_suspend, xhci_mtk_resume)
> };
> -#define DEV_PM_OPS (&xhci_mtk_pm_ops)
> -#else
> -#define DEV_PM_OPS NULL
> -#endif /* CONFIG_PM */
> +#define DEV_PM_OPS IS_ENABLED(CONFIG_PM) ? &xhci_mtk_pm_ops : NULL
>
> #ifdef CONFIG_OF
> static const struct of_device_id mtk_xhci_of_match[] = {
>
next prev parent reply other threads:[~2016-03-04 16:33 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-03-02 15:24 usb: avoid warnings for unused pm functions Arnd Bergmann
2016-03-02 15:24 ` [PATCH 1/6] usb: host: unhide suspend/resume declarations Arnd Bergmann
2016-03-02 15:58 ` Alan Stern
2016-03-02 15:24 ` [PATCH 2/6] usb: xhci-mtk: use __maybe_unused to hide pm functions Arnd Bergmann
2016-03-04 16:33 ` Matthias Brugger [this message]
2016-03-10 11:42 ` Mathias Nyman
2016-03-02 15:24 ` [PATCH 3/6] usb: ohci-at91: " Arnd Bergmann
2016-03-02 15:34 ` Nicolas Ferre
2016-03-02 15:24 ` [PATCH 4/6] usb: ehci-atmel: " Arnd Bergmann
2016-03-02 15:34 ` Nicolas Ferre
2016-03-02 15:24 ` [PATCH 5/6] phy: dm816x: " Arnd Bergmann
2016-03-02 15:24 ` [PATCH 6/6] phy: twl4030: " Arnd Bergmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=56D9B8EE.3060107@gmail.com \
--to=matthias.bgg@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).