From mboxrd@z Thu Jan  1 00:00:00 1970
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov)
Date: Fri, 25 Mar 2016 16:29:04 +0300
Subject: [PATCH v3 01/16] dt: davinci: use proper address after @
In-Reply-To: <1458863503-31121-2-git-send-email-david@lechnology.com>
References: <1458863503-31121-1-git-send-email-david@lechnology.com>
 <1458863503-31121-2-git-send-email-david@lechnology.com>
Message-ID: <56F53D20.6030709@cogentembedded.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hello.

On 03/25/2016 02:51 AM, David Lechner wrote:

> TI has been using the physical address in DT after the @ in device nodes.
> The device tree convention is to use the same address that is used for
> the reg property. This updates all davinci DT files to use the proper
> convention.
>
> Signed-off-by: David Lechner <david@lechnology.com>
[...]

> diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
> index 226cda7..4294849 100644
> --- a/arch/arm/boot/dts/da850.dtsi
> +++ b/arch/arm/boot/dts/da850.dtsi
> @@ -15,7 +15,7 @@
>   		#address-cells = <1>;
>   		#size-cells = <1>;
>   		ranges;
> -		intc: interrupt-controller {
> +		intc: interrupt-controller at fffee000 {
>   			compatible = "ti,cp-intc";
>   			interrupt-controller;
>   			#interrupt-cells = <1>;
> @@ -23,7 +23,7 @@
>   			reg = <0xfffee000 0x2000>;
>   		};
>   	};
> -	soc {
> +	soc at 1c00000 {

    This node doesn't have the "reg" prop.

[...]

MBR, Sergei