[PATCH] ARM: dts: AM572x-IDK Initial Support

Rob Herring
2016-03-25T15:03:44Z

On Thu, Mar 24, 2016 at 05:30:44PM -0500, Nishanth Menon wrote:
> From: Schuyler Patton <spatton@ti.com>
>
> The AM572x-IDK board is a board based on TI's AM5728 SOC
> which has a dual core 1.5GHz A15 processor. This board is a
> development platform for the Industrial market with:
> - 2GB of DDR3L
> - Dual 1Gbps Ethernet
> - HDMI,
> - PRU-ICSS
> - uSD
> - 16GB eMMC
> - CAN
> - RS-485
> - PCIe
> - USB3.0
> - Video Input Port
> - Industrial IO port and expansion connector
>
> The link to the data sheet and TRM can be found here:
>
> http://www.ti.com/product/AM5728
>
> This patch creates a common dtsi file that will provide a common board
> dtsi file to define the nodes that are common to AM57xx (including the
> upcoming AM5718) IDK boards.
>
> Initial support is only for basic peripherals
>
> Signed-off-by: Schuyler Patton <spatton@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> Based on 6f30d29c603c Add linux-next specific files for 20160324
>
> Test log: http://pastebin.ubuntu.com/15490907/
>
> .../devicetree/bindings/arm/omap/omap.txt | 3 +
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/am572x-idk.dts | 85 ++++++
> arch/arm/boot/dts/am57xx-idk-common.dtsi | 308 +++++++++++++++++++++
> 4 files changed, 397 insertions(+)
> create mode 100644 arch/arm/boot/dts/am572x-idk.dts
> create mode 100644 arch/arm/boot/dts/am57xx-idk-common.dtsi
>
> diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
> index 21e71a5e866e..38659aa35ce3 100644
> --- a/Documentation/devicetree/bindings/arm/omap/omap.txt
> +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
> @@ -169,6 +169,9 @@ Boards:
> - AM57XX SBC-AM57x
> compatible = "compulab,sbc-am57x", "compulab,cl-som-am57x", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"
>
> +- AM5728 IDK
> + compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7"

Okay, but I think the TI folks have gone a bit crazy with all these
compatible strings...

> +
> - DRA742 EVM: Software Development Board for DRA742
> compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7"
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b25621ae2ff7..fec03c814a95 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -526,6 +526,7 @@ dtb-$(CONFIG_SOC_DRA7XX) += \
> am57xx-beagle-x15.dtb \
> am57xx-cl-som-am57x.dtb \
> am57xx-sbc-am57x.dtb \
> + am572x-idk.dtb \
> dra7-evm.dtb \
> dra72-evm.dtb
> dtb-$(CONFIG_ARCH_ORION5X) += \
> diff --git a/arch/arm/boot/dts/am572x-idk.dts b/arch/arm/boot/dts/am572x-idk.dts
> new file mode 100644
> index 000000000000..bb51f6de7b45
> --- /dev/null
> +++ b/arch/arm/boot/dts/am572x-idk.dts
> @@ -0,0 +1,85 @@
> +/*
> + * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/dts-v1/;
> +
> +#include "dra74x.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include "am57xx-idk-common.dtsi"
> +
> +/ {
> + model = "TI AM5728 IDK";
> + compatible = "ti,am5728-idk", "ti,am5728", "ti,dra742", "ti,dra74",
> + "ti,dra7";
> +
> + memory {
> + device_type = "memory";
> + reg = <0x0 0x80000000 0x0 0x80000000>;
> + };
> +
> + extcon_usb2: extcon_usb2 {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
> + };
> +
> + leds {
> + compatible = "gpio-leds";
> + led at 0 {

Unit-address without reg is going to start warning in dtc. Use something
like "cpu0-led" instead.