From: eric.auger@linaro.org (Eric Auger)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v7 00/10] KVM PCIe/MSI passthrough on ARM/ARM64: kernel part 1/3: iommu changes
Date: Thu, 21 Apr 2016 14:18:09 +0200 [thread overview]
Message-ID: <5718C501.20906@linaro.org> (raw)
In-Reply-To: <1461084994-2355-1-git-send-email-eric.auger@linaro.org>
Hi Alex, Robin,
On 04/19/2016 06:56 PM, Eric Auger wrote:
> This series introduces the dma-reserved-iommu api used to:
>
> - create/destroy an iova domain dedicated to reserved iova bindings
> - map/unmap physical addresses onto reserved IOVAs.
> - search for an existing reserved iova mapping matching a PA window
> - determine whether an msi needs to be iommu mapped
> - translate an msi_msg PA address into its IOVA counterpart
Following Robin's review, I understand one important point we have to
clarify is how much this API has to be generic.
I agree with Robin on the fact there is quite a lot of duplication
between this dma-reserved-iommu implementation and dma-iommu
implementation. Maybe we could consider an msi-mapping API
implementation upon dma-iommu.c. This implementation would add MSI
doorbell binding list management, including, ref counting and locking.
We would need to add a map/unmap function taking an iova/pa/size as
parameters in current dma-iommu.c
An important assumption is that the dma-mapping API and the msi-mapping
API must not be used concurrently (be would be trying to use the same
cookie to store a different iova_domain).
Any thought/suggestion?
Best Regards
Eric
>
> Currently reserved IOVAs are meant to map MSI physical doorbells. A single
> reserved domain does exit per domain.
>
> Also a new domain attribute is introduced to signal whether the MSI
> addresses must be mapped in the IOMMU.
>
> In current usage:
> VFIO subsystem is supposed to create/destroy the iommu reserved domain.
> The MSI layer is supposed to allocate/free iova mappings
>
> Since several drivers are likely to use the same doorbell, a reference
> counting takes place on the bindings. An RB-tree indexed by PA is used
> to easily lookup for existing mappings at MSI message composition time.
>
> More details & context can be found at:
> http://www.linaro.org/blog/core-dump/kvm-pciemsi-passthrough-armarm64/
>
> Best Regards
>
> Eric
>
> Git: complete series available at
> https://git.linaro.org/people/eric.auger/linux.git/shortlog/refs/heads/v4.6-rc4-pcie-passthrough-v7
>
> History:
>
> v6 -> v7:
> - fixed known lock bugs and multiple page sized slots matching
> (I currently only have a single MSI frame made of a single page)
> - reserved_iova_cookie now pointing to a struct that encapsulates the
> iova domain handle + protection attribute passed from VFIO (Alex' req)
> - 2 new functions exposed: iommu_msi_mapping_translate_msg,
> iommu_msi_mapping_desc_to_domain: not sure this is the right location/proto
> though
> - iommu_put_reserved_iova now takes a phys_addr_t
> - everything now is cleanup on iommu_domain destruction
>
> RFC v5 -> patch v6:
> - split to ease the review process
> - in dma-reserved-api use a spin lock instead of a mutex (reported by
> Jean-Philippe)
> - revisit iommu_get_reserved_iova API to pass a size parameter upon
> Marc's request
> - Consistently use the page order passed when creating the iova domain.
> - init reserved_binding_list (reported by Julien)
>
> RFC v4 -> RFC v5:
> - take into account Thomas' comments on MSI related patches
> - split "msi: IOMMU map the doorbell address when needed"
> - increase readability and add comments
> - fix style issues
> - split "iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute"
> - platform ITS now advertises IOMMU_CAP_INTR_REMAP
> - fix compilation issue with CONFIG_IOMMU API unset
> - arm-smmu-v3 now advertises DOMAIN_ATTR_MSI_MAPPING
>
> RFC v3 -> v4:
> - Move doorbell mapping/unmapping in msi.c
> - fix ref count issue on set_affinity: in case of a change in the address
> the previous address is decremented
> - doorbell map/unmap now is done on msi composition. Should allow the use
> case for platform MSI controllers
> - create dma-reserved-iommu.h/c exposing/implementing a new API dedicated
> to reserved IOVA management (looking like dma-iommu glue)
> - series reordering to ease the review:
> - first part is related to IOMMU
> - second related to MSI sub-system
> - third related to VFIO (except arm-smmu IOMMU_CAP_INTR_REMAP removal)
> - expose the number of requested IOVA pages through VFIO_IOMMU_GET_INFO
> [this partially addresses Marc's comments on iommu_get/put_single_reserved
> size/alignment problematic - which I did not ignore - but I don't know
> how much I can do at the moment]
>
> RFC v2 -> RFC v3:
> - should fix wrong handling of some CONFIG combinations:
> CONFIG_IOVA, CONFIG_IOMMU_API, CONFIG_PCI_MSI_IRQ_DOMAIN
> - fix MSI_FLAG_IRQ_REMAPPING setting in GICv3 ITS (although not tested)
>
> PATCH v1 -> RFC v2:
> - reverted to RFC since it looks more reasonable ;-) the code is split
> between VFIO, IOMMU, MSI controller and I am not sure I did the right
> choices. Also API need to be further discussed.
> - iova API usage in arm-smmu.c.
> - MSI controller natively programs the MSI addr with either the PA or IOVA.
> This is not done anymore in vfio-pci driver as suggested by Alex.
> - check irq remapping capability of the group
>
> RFC v1 [2] -> PATCH v1:
> - use the existing dma map/unmap ioctl interface with a flag to register a
> reserved IOVA range. Use the legacy Rb to store this special vfio_dma.
> - a single reserved IOVA contiguous region now is allowed
> - use of an RB tree indexed by PA to store allocated reserved slots
> - use of a vfio_domain iova_domain to manage iova allocation within the
> window provided by the userspace
> - vfio alloc_map/unmap_free take a vfio_group handle
> - vfio_group handle is cached in vfio_pci_device
> - add ref counting to bindings
> - user modality enabled at the end of the series
>
>
> Eric Auger (10):
> iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute
> iommu/arm-smmu: advertise DOMAIN_ATTR_MSI_MAPPING attribute
> iommu: introduce a reserved iova cookie
> iommu/dma-reserved-iommu: alloc/free_reserved_iova_domain
> iommu/dma-reserved-iommu: reserved binding rb-tree and helpers
> iommu/dma-reserved-iommu: iommu_get/put_reserved_iova
> iommu/dma-reserved-iommu: delete bindings in
> iommu_free_reserved_iova_domain
> iommu/dma-reserved_iommu: iommu_msi_mapping_desc_to_domain
> iommu/dma-reserved-iommu: iommu_msi_mapping_translate_msg
> iommu/arm-smmu: call iommu_free_reserved_iova_domain on domain
> destruction
>
> drivers/iommu/Kconfig | 8 +
> drivers/iommu/Makefile | 1 +
> drivers/iommu/arm-smmu-v3.c | 4 +
> drivers/iommu/arm-smmu.c | 4 +
> drivers/iommu/dma-reserved-iommu.c | 422 +++++++++++++++++++++++++++++++++++++
> drivers/iommu/iommu.c | 2 +
> include/linux/dma-reserved-iommu.h | 142 +++++++++++++
> include/linux/iommu.h | 7 +
> 8 files changed, 590 insertions(+)
> create mode 100644 drivers/iommu/dma-reserved-iommu.c
> create mode 100644 include/linux/dma-reserved-iommu.h
>
next prev parent reply other threads:[~2016-04-21 12:18 UTC|newest]
Thread overview: 43+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-19 16:56 [PATCH v7 00/10] KVM PCIe/MSI passthrough on ARM/ARM64: kernel part 1/3: iommu changes Eric Auger
2016-04-19 16:56 ` [PATCH v7 01/10] iommu: Add DOMAIN_ATTR_MSI_MAPPING attribute Eric Auger
2016-04-20 12:47 ` Robin Murphy
2016-04-20 15:58 ` Eric Auger
2016-04-22 11:31 ` Robin Murphy
2016-04-22 12:00 ` Eric Auger
2016-04-22 14:49 ` Robin Murphy
2016-04-22 15:33 ` Eric Auger
2016-04-19 16:56 ` [PATCH v7 02/10] iommu/arm-smmu: advertise " Eric Auger
2016-04-19 16:56 ` [PATCH v7 03/10] iommu: introduce a reserved iova cookie Eric Auger
2016-04-20 12:55 ` Robin Murphy
2016-04-20 16:14 ` Eric Auger
2016-04-22 12:36 ` Robin Murphy
2016-04-22 13:02 ` Eric Auger
2016-04-22 14:53 ` Eric Auger
2016-04-19 16:56 ` [PATCH v7 04/10] iommu/dma-reserved-iommu: alloc/free_reserved_iova_domain Eric Auger
2016-04-20 13:03 ` Robin Murphy
2016-04-20 13:11 ` Eric Auger
2016-04-19 16:56 ` [PATCH v7 05/10] iommu/dma-reserved-iommu: reserved binding rb-tree and helpers Eric Auger
2016-04-20 13:12 ` Robin Murphy
2016-04-20 16:18 ` Eric Auger
2016-04-22 13:05 ` Robin Murphy
2016-04-19 16:56 ` [PATCH v7 06/10] iommu/dma-reserved-iommu: iommu_get/put_reserved_iova Eric Auger
2016-04-20 16:58 ` Robin Murphy
2016-04-21 8:43 ` Eric Auger
2016-04-19 16:56 ` [PATCH v7 07/10] iommu/dma-reserved-iommu: delete bindings in iommu_free_reserved_iova_domain Eric Auger
2016-04-20 17:05 ` Robin Murphy
2016-04-21 8:40 ` Eric Auger
2016-04-19 16:56 ` [PATCH v7 08/10] iommu/dma-reserved_iommu: iommu_msi_mapping_desc_to_domain Eric Auger
2016-04-20 17:19 ` Robin Murphy
2016-04-21 8:40 ` Eric Auger
2016-04-19 16:56 ` [PATCH v7 09/10] iommu/dma-reserved-iommu: iommu_msi_mapping_translate_msg Eric Auger
2016-04-20 9:38 ` Marc Zyngier
2016-04-20 12:50 ` Eric Auger
2016-04-20 17:28 ` Robin Murphy
2016-04-21 8:40 ` Eric Auger
2016-04-19 16:56 ` [PATCH v7 10/10] iommu/arm-smmu: call iommu_free_reserved_iova_domain on domain destruction Eric Auger
2016-04-20 17:35 ` Robin Murphy
2016-04-21 8:39 ` Eric Auger
2016-04-21 12:18 ` Eric Auger [this message]
2016-04-21 19:32 ` [PATCH v7 00/10] KVM PCIe/MSI passthrough on ARM/ARM64: kernel part 1/3: iommu changes Alex Williamson
2016-04-22 12:31 ` Eric Auger
2016-04-22 19:07 ` Alex Williamson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=5718C501.20906@linaro.org \
--to=eric.auger@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).