[PATCH 0/3] ARM: nommu: R-class fixes

[vladimir.murzin@arm.com (Vladimir Murzin)]

On 26/04/16 12:59, Arnd Bergmann wrote:
> On Tuesday 26 April 2016 11:57:38 Vladimir Murzin wrote:
>> On 26/04/16 10:10, Arnd Bergmann wrote:
>>> On Tuesday 26 April 2016 09:17:14 Vladimir Murzin wrote:
> 
>>> Turning it around would limit the platforms to the ones that
>>> explictly turn on NOMMU support. In order to make ARMv7-R support
>>> work, we need either another top-level platform option next to
>>> ARCH_MULTIPLATFORM and ARM_SINGLE_ARMV7M, or add ARMv7-R in
>>> the CPU selection phase as an alternative to ARMv4/5 and ARMv6/7-A.
>>>
>>
>> It depends if we what NOMMU represented (apart from M-class) R-class
>> only or R-class + A-class without MMU.
> 
> Exactly. The same is of course true for the older architectures:
> There are tons of ARM7TDMI, ARM946, ARM1156 or Marvell Feroceon cores
> without MMU, but we don't currently support any of them with an
> upstream kernel. Respectively, we should in theory be able to
> run on any of the other MMU based cores that we do support (ARM720T,
> StrongARM, ARM92x, ARM1136/1176/MPCore, ...) with the MMU disabled,
> but neither of the two scenarios seems interesting for mainline
> kernels in this age any more.
> 
> What we know is that ARMv7-M is widely used, ARMv7-R makes a lot of
> sense to use, and there are probably use cases for ARMv7-A without
> MMU.
> 
>>>>> What hardware platform do you use? It would be nice to make it a little
>>>>> more explicit which platforms can use the ARMv7-R, or an ARMv7-A with
>>>>> the MMU disabled.
>>>>
>>>> Currently I'm dealing mostly with ARMv7-R FVP models which represents
>>>> Vexpress with R-class tile (it is why this mini series have MPU
>>>> patches). I've never tried ARMv7-A with the MMU disabled and I'm quite
>>>> in doubt if it is feasible.
>>>
>>> What is the difference? I always assumed that ARMv7-R and ARMv7-A are
>>> sufficiently close that you can run the same kernel on both as long
>>> as you use neither the MMU nor the MPU.
>>
>> Right they are quite close and shares a lot of code except MMU and MPU,
>> and I'd think without MMU/MPU such configurations are limited with UP
>> only. I've not though of such option before, so I'd need to try and see.
>>
>> On the other hand assumption that NOMMU == ARMv7-A - MMU, makes me think
>> that any ARMv7 platform should be available for selection if CONFIG_MMU
>> is deselected. At least such approach gives better build coverage and if
>> there are platforms which suffer from such assumption runtime they can
>> be guarded with COMPILE_TEST.
> 
> I think one problem is that with MMU disabled ARMv7-A, you implicitly
> disable the caches and that is probably what you are thinking of for
> SMP support as well (atomic instructions need caches).

Another problem is that we need to provide DRAM_BASE and DRAM_SIZE for
such builds, but it can be addressed with 1:1 mappings you've described
below

> 
> However, this can be worked around using a static page table set up
> at boot time that creates hugepage entries with appropriate flags for
> RAM and I/O areas. If we ever had a usecase for running this setup
> in production, we could even fake an MPU that way.

I'd think that support for FDPIC would make it one step closer.

I conclude that we don't want dedicated option for R-class cores and we
start from assumption that NOMMU covers: M-, R- and A- (without MMU or
1:1 mapping) cores. Please, correct me.

Vladimir

> 	Arnd
> 
>