From mboxrd@z Thu Jan 1 00:00:00 1970 From: maxime.coquelin@st.com (Maxime Coquelin) Date: Tue, 26 Apr 2016 16:09:51 +0200 Subject: [[PATCH v2] 1/8] ARM: dts: STi: STiH407: Provide generic (safe) DVFS configuration In-Reply-To: <1461251267-14897-1-git-send-email-lee.jones@linaro.org> References: <1461251267-14897-1-git-send-email-lee.jones@linaro.org> Message-ID: <571F76AF.6040808@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Lee, Series is applied, thanks for having done the changes. Note that I had to rework all the commit titles, because of the double brackets ("[[PATCH v2] 1/8]"). Something wrong with your script? Thanks, Maxime On 04/21/2016 05:07 PM, Lee Jones wrote: > You'll notice that the voltage cell is populated with 0's. Voltage > information is very platform specific, even depends on 'cut' and > 'substrate' versions. Thus it is left blank for a generic (safe) > implementation. If other nodes/properties are provided by the > bootloader, the ST CPUFreq driver will over-ride these generic > values. > > Signed-off-by: Lee Jones > Signed-off-by: Maxime Coquelin > --- > arch/arm/boot/dts/stih407-family.dtsi | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi > index 81f8121..9fa1e58 100644 > --- a/arch/arm/boot/dts/stih407-family.dtsi > +++ b/arch/arm/boot/dts/stih407-family.dtsi > @@ -22,15 +22,29 @@ > device_type = "cpu"; > compatible = "arm,cortex-a9"; > reg = <0>; > + > /* u-boot puts hpen in SBC dmem at 0xa4 offset */ > cpu-release-addr = <0x94100A4>; > + > + /* kHz uV */ > + operating-points = <1500000 0 > + 1200000 0 > + 800000 0 > + 500000 0>; > }; > cpu at 1 { > device_type = "cpu"; > compatible = "arm,cortex-a9"; > reg = <1>; > + > /* u-boot puts hpen in SBC dmem at 0xa4 offset */ > cpu-release-addr = <0x94100A4>; > + > + /* kHz uV */ > + operating-points = <1500000 0 > + 1200000 0 > + 800000 0 > + 500000 0>; > }; > }; >