* [PATCH] ARM: mx5: dts: Enable USB OTG on M53EVK
@ 2016-04-19 22:36 Marek Vasut
2016-05-03 10:44 ` Marek Vasut
0 siblings, 1 reply; 4+ messages in thread
From: Marek Vasut @ 2016-04-19 22:36 UTC (permalink / raw)
To: linux-arm-kernel
Add USB OTG support to M53EVK instead of just USB gadget.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
---
arch/arm/boot/dts/imx53-m53evk.dts | 21 ++++++++++++++++++++-
1 file changed, 20 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index 53f4088..dcee1e0f 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -84,6 +84,15 @@
regulator-max-microvolt = <5000000>;
gpio = <&gpio1 2 0>;
};
+
+ reg_usb_otg_vbus: regulator at 4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio1 4 0>;
+ };
};
sound {
@@ -168,6 +177,12 @@
>;
};
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX53_PAD_GPIO_4__GPIO1_4 0x000b0
+ >;
+ };
+
led_pin_gpio: led_gpio at 0 {
fsl,pins = <
MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
@@ -351,6 +366,10 @@
};
&usbotg {
- dr_mode = "peripheral";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ dr_mode = "otg";
+ vbus-supply = <®_usb_otg_vbus>;
+ disable-over-current;
status = "okay";
};
--
2.7.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH] ARM: mx5: dts: Enable USB OTG on M53EVK
2016-04-19 22:36 [PATCH] ARM: mx5: dts: Enable USB OTG on M53EVK Marek Vasut
@ 2016-05-03 10:44 ` Marek Vasut
2016-05-03 13:11 ` Shawn Guo
0 siblings, 1 reply; 4+ messages in thread
From: Marek Vasut @ 2016-05-03 10:44 UTC (permalink / raw)
To: linux-arm-kernel
On 04/20/2016 12:36 AM, Marek Vasut wrote:
> Add USB OTG support to M53EVK instead of just USB gadget.
>
> Signed-off-by: Marek Vasut <marex@denx.de>
> Cc: Shawn Guo <shawn.guo@linaro.org>
Bump ?
btw. Shawn, is the @k.org the address I should use now ?
> ---
> arch/arm/boot/dts/imx53-m53evk.dts | 21 ++++++++++++++++++++-
> 1 file changed, 20 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
> index 53f4088..dcee1e0f 100644
> --- a/arch/arm/boot/dts/imx53-m53evk.dts
> +++ b/arch/arm/boot/dts/imx53-m53evk.dts
> @@ -84,6 +84,15 @@
> regulator-max-microvolt = <5000000>;
> gpio = <&gpio1 2 0>;
> };
> +
> + reg_usb_otg_vbus: regulator at 4 {
> + compatible = "regulator-fixed";
> + reg = <4>;
> + regulator-name = "usb_otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&gpio1 4 0>;
> + };
> };
>
> sound {
> @@ -168,6 +177,12 @@
> >;
> };
>
> + pinctrl_usbotg: usbotggrp {
> + fsl,pins = <
> + MX53_PAD_GPIO_4__GPIO1_4 0x000b0
> + >;
> + };
> +
> led_pin_gpio: led_gpio at 0 {
> fsl,pins = <
> MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
> @@ -351,6 +366,10 @@
> };
>
> &usbotg {
> - dr_mode = "peripheral";
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_usbotg>;
> + dr_mode = "otg";
> + vbus-supply = <®_usb_otg_vbus>;
> + disable-over-current;
> status = "okay";
> };
>
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH] ARM: mx5: dts: Enable USB OTG on M53EVK
2016-05-03 10:44 ` Marek Vasut
@ 2016-05-03 13:11 ` Shawn Guo
2016-05-03 13:14 ` Marek Vasut
0 siblings, 1 reply; 4+ messages in thread
From: Shawn Guo @ 2016-05-03 13:11 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, May 03, 2016 at 12:44:23PM +0200, Marek Vasut wrote:
> On 04/20/2016 12:36 AM, Marek Vasut wrote:
> > Add USB OTG support to M53EVK instead of just USB gadget.
> >
> > Signed-off-by: Marek Vasut <marex@denx.de>
> > Cc: Shawn Guo <shawn.guo@linaro.org>
>
> Bump ?
Applied, thanks.
>
> btw. Shawn, is the @k.org the address I should use now ?
Yes.
Shawn
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] ARM: mx5: dts: Enable USB OTG on M53EVK
2016-05-03 13:11 ` Shawn Guo
@ 2016-05-03 13:14 ` Marek Vasut
0 siblings, 0 replies; 4+ messages in thread
From: Marek Vasut @ 2016-05-03 13:14 UTC (permalink / raw)
To: linux-arm-kernel
On 05/03/2016 03:11 PM, Shawn Guo wrote:
> On Tue, May 03, 2016 at 12:44:23PM +0200, Marek Vasut wrote:
>> On 04/20/2016 12:36 AM, Marek Vasut wrote:
>>> Add USB OTG support to M53EVK instead of just USB gadget.
>>>
>>> Signed-off-by: Marek Vasut <marex@denx.de>
>>> Cc: Shawn Guo <shawn.guo@linaro.org>
>>
>> Bump ?
>
> Applied, thanks.
>
>>
>> btw. Shawn, is the @k.org the address I should use now ?
>
> Yes.
>
> Shawn
>
OK, will be careful next time. Thanks!
--
Best regards,
Marek Vasut
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-05-03 13:14 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-04-19 22:36 [PATCH] ARM: mx5: dts: Enable USB OTG on M53EVK Marek Vasut
2016-05-03 10:44 ` Marek Vasut
2016-05-03 13:11 ` Shawn Guo
2016-05-03 13:14 ` Marek Vasut
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).