linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: stefan.wahren@i2se.com (Stefan Wahren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: mxs: dts: Add Creative X-Fi3 support
Date: Mon, 9 May 2016 10:30:38 +0200	[thread overview]
Message-ID: <57304AAE.20103@i2se.com> (raw)
In-Reply-To: <572FA04B.1020005@denx.de>

Hi,

Am 08.05.2016 um 22:23 schrieb Marek Vasut:
> On 05/06/2016 09:40 AM, Stefan Wahren wrote:
>> Hi Marek,
> Hi!
>
>> sorry for the reply format.
> replying from a phone ? :)

no an ugly webmailer :(

>
>>> Marek Vasut <marex@denx.de> hat am 5. Mai 2016 um 22:26 geschrieben:
>>>
>>> Add support for this small MP3 player based on STMP3780 (rev.4).
>>> Currently supported is both external microSD and internal SD-NAND
>>> bridge, PWM and USB gadget.
>>>
>>> Signed-off-by: Marek Vasut <marex@denx.de>
>>> Cc: Fabio Estevam <fabio.estevam@nxp.com>
>>> Cc: Shawn Guo <shawnguo@kernel.org>
>>> ---
>>>  arch/arm/boot/dts/Makefile | 1 +
>>>  arch/arm/boot/dts/imx23-xfi3.dts | 190
>>> +++++++++++++++++++++++++++++++++++++++
>>>  2 files changed, 191 insertions(+)
>>>  create mode 100644 arch/arm/boot/dts/imx23-xfi3.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index 8f9f1c2..7a79d37 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -417,6 +417,7 @@ dtb-$(CONFIG_ARCH_MXS) += \
>>>  imx23-evk.dtb \
>>>  imx23-olinuxino.dtb \
>>>  imx23-stmp378x_devb.dtb \
>>> + imx23-xfi3.dtb \
>>>  imx28-apf28.dtb \
>>>  imx28-apf28dev.dtb \
>>>  imx28-apx4devkit.dtb \
>>> diff --git a/arch/arm/boot/dts/imx23-xfi3.dts
>>> b/arch/arm/boot/dts/imx23-xfi3.dts
>>> new file mode 100644
>>> index 0000000..d7e7cf5
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/imx23-xfi3.dts
>>> @@ -0,0 +1,190 @@
>>> +/*
>>> + * Copyright (C) 2013-2016 Marek Vasut <marex@denx.de>
>>> + *
>>> + * This file is dual-licensed: you can use it either under the terms
>>> + * of the GPL or the X11 license, at your option. Note that this dual
>>> + * licensing only applies to this file, and not this project as a
>>> + * whole.
>>> + *
>>> + * a) This file is free software; you can redistribute it and/or
>>> + * modify it under the terms of the GNU General Public License as
>>> + * published by the Free Software Foundation; either version 2 of
>>> + * the License, or (at your option) any later version.
>>> + *
>>> + * This file is distributed in the hope that it will be useful,
>>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>>> + * GNU General Public License for more details.
>>> + *
>>> + * You should have received a copy of the GNU General Public
>>> + * License along with this file; if not, write to the Free
>>> + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
>>> + * MA 02110-1301 USA
>> AFAIK this address shouldn't be included.
> Hmmm, some boards do include it. I'll remove it from this submission and
> also for the xfi.
>
> Shall I send patch(es) removing the address from the other boards too ?

i'm not sure. Maybe Shawn has an opinion about it.

Thanks
Stefan

  reply	other threads:[~2016-05-09  8:30 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-05 20:26 [PATCH 1/4] ARM: mxs: dts: Add SSP2 SD mux Marek Vasut
2016-05-05 20:26 ` [PATCH 2/4] ARM: mxs: dts: Add AUART2 pinmux Marek Vasut
2016-05-05 20:26 ` [PATCH 3/4] ARM: mxs: dts: Add Creative X-Fi3 support Marek Vasut
2016-05-06  7:40   ` Stefan Wahren
2016-05-08 20:23     ` Marek Vasut
2016-05-09  8:30       ` Stefan Wahren [this message]
2016-05-09 10:13         ` Marek Vasut
2016-05-05 20:26 ` [PATCH 4/4] ARM: mxs: dts: Add SanDisk Sansa Fuze+ support Marek Vasut

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57304AAE.20103@i2se.com \
    --to=stefan.wahren@i2se.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).