From: adrian.hunter@intel.com (Adrian Hunter)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 10/23] mmc: core: disable auto retune during card detection process
Date: Tue, 10 May 2016 09:55:56 +0300 [thread overview]
Message-ID: <573185FC.5060506@intel.com> (raw)
In-Reply-To: <20160429074258.GA28427@shlinux2.ap.freescale.net>
On 29/04/16 10:42, Dong Aisheng wrote:
> And IMX6DL ARD is even worser due to it's using common
> mmc_send_tuning() function.
> root at imx6qdlsolo:~#
> root at imx6qdlsolo:~# [ 129.462564] sysrq: SysRq : Changing Loglevel
> [ 129.466902] sysrq: Loglevel set to 8
> [ 131.616078] sdhci-esdhc-imx 2198000.usdhc: desired SD clock: 198000000, actual: 198000000
> [ 131.625311] sdhci-esdhc-imx 2198000.usdhc: change pinctrl state for uhs 6
> [ 131.632133] sdhci-esdhc-imx 2198000.usdhc: desired SD clock: 198000000, actual: 198000000
> [ 131.642121] mmc0: starting CMD13 arg 59b40000 flags 00000195
> [ 131.648925] sdhci-esdhc-imx 2198000.usdhc: tunning with delay 0x0 ESDHC_TUNE_CTRL_STATUS 0x0
> [ 131.657818] mmc0: starting CMD19 arg 00000000 flags 00000035
> [ 131.663518] mmc0: blksz 64 blocks 1 flags 00000200 tsac 150 ms nsac 0
> [ 131.670835] mmc0: req done (CMD19): -123: 00000000 00000000 00000000 00000000
You should stop here because -123 is -ENOMEDIUM
next prev parent reply other threads:[~2016-05-10 6:55 UTC|newest]
Thread overview: 85+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-04-15 17:29 [PATCH 00/23] a few sdhci/imx clean up and fix patches Dong Aisheng
2016-04-15 17:29 ` [PATCH 01/23] mmc: sdhci: removed unneeded function wrappers Dong Aisheng
2016-04-22 10:27 ` Adrian Hunter
2016-05-10 6:32 ` Adrian Hunter
2016-05-10 9:46 ` Ulf Hansson
2016-04-15 17:29 ` [PATCH 02/23] mmc: sdhci: move sdhci_get_cd() forward to avoid declaration Dong Aisheng
2016-04-22 10:27 ` Adrian Hunter
2016-04-24 9:17 ` Dong Aisheng
2016-04-27 20:26 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 03/23] mmc: core: fix a comment typo Dong Aisheng
2016-04-22 10:28 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 04/23] mmc: sdhci: re-factor sdhci_start_signal_voltage() Dong Aisheng
2016-04-22 11:43 ` Adrian Hunter
2016-04-24 9:14 ` Dong Aisheng
2016-04-27 20:26 ` Adrian Hunter
2016-04-28 3:09 ` Dong Aisheng
2016-04-28 6:39 ` Adrian Hunter
2016-04-28 7:15 ` Jaehoon Chung
2016-04-28 7:44 ` Adrian Hunter
2016-04-28 8:30 ` Jaehoon Chung
2016-04-28 14:09 ` Dong Aisheng
2016-04-28 23:06 ` Jaehoon Chung
2016-04-28 13:14 ` Dong Aisheng
2016-04-28 13:36 ` Adrian Hunter
2016-04-28 14:28 ` Dong Aisheng
2016-04-29 7:32 ` Adrian Hunter
2016-04-29 7:57 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 05/23] mmc: core: mmc_regulator_set_vqmmc not return error if vqmmc/vmmc not exist Dong Aisheng
2016-04-15 17:29 ` [PATCH 06/23] mmc: sdhci: using common mmc_regulator_set_vqmmc() Dong Aisheng
2016-04-22 11:48 ` Adrian Hunter
2016-04-24 9:25 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 07/23] mmc: sdhci: check SDHCI_QUIRK2_NO_1_8_V when do voltage switch Dong Aisheng
2016-04-22 12:30 ` Adrian Hunter
2016-04-24 9:56 ` Dong Aisheng
2016-04-27 20:27 ` Adrian Hunter
2016-04-28 13:24 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 08/23] mmc: sdhci: rename quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 Dong Aisheng
2016-04-22 12:33 ` Adrian Hunter
2016-04-24 10:00 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 09/23] mmc: sdhci: fix incorrect get data interrupt during no data transfer Dong Aisheng
2016-05-10 6:51 ` Adrian Hunter
2016-05-17 4:31 ` Ritesh Harjani
2016-05-17 5:58 ` Adrian Hunter
2016-05-26 14:59 ` Ritesh Harjani
2016-05-26 11:41 ` Dong Aisheng
2016-05-26 11:59 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 10/23] mmc: core: disable auto retune during card detection process Dong Aisheng
2016-04-22 12:48 ` Adrian Hunter
2016-04-24 10:47 ` Dong Aisheng
2016-04-28 7:04 ` Adrian Hunter
2016-04-28 13:22 ` Dong Aisheng
2016-04-29 6:54 ` Adrian Hunter
2016-04-29 7:42 ` Dong Aisheng
2016-05-10 6:55 ` Adrian Hunter [this message]
2016-05-31 10:18 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 11/23] mmc: sdhci-esdhci-imx: remove SDHCI_QUIRK_BROKEN_TIMEOUT_VAL Dong Aisheng
2016-05-10 9:30 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 12/23] mmc: sdhci-esdhc-imx: add esdhc specific suspend resume callback Dong Aisheng
2016-05-10 9:35 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 13/23] mmc: sdhci-esdhc-imx: restore watermark level setting after resume Dong Aisheng
2016-05-10 9:30 ` Adrian Hunter
2016-05-31 7:18 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 14/23] mmc: sdhci-esdhci-imx: disable DLL delay line settings explicitly Dong Aisheng
2016-05-10 11:02 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 15/23] mmc: sdhci-esdhc-imx: support setting tuning start point Dong Aisheng
2016-05-10 11:17 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 16/23] doc: dt: fsl-imx-esdhc: add set tuning start point binding Dong Aisheng
2016-04-15 17:29 ` [PATCH 17/23] mmc: sdhci: add standard hw auto retuning support Dong Aisheng
2016-05-10 8:35 ` Adrian Hunter
2016-05-26 12:11 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 18/23] mmc: sdhci-esdhc-imx: enable hw auto retuning for STD_TUNING Dong Aisheng
2016-05-10 11:19 ` Adrian Hunter
2016-05-26 12:21 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 19/23] mmc: sdhci-esdhc-imx: enable hw auto retuning for MAN_TUNING Dong Aisheng
2016-05-10 11:24 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 20/23] mmc: sdhci-esdhc-imx: fix strobe DLL lock wrong clock issue Dong Aisheng
2016-05-10 12:03 ` Adrian Hunter
2016-05-26 11:47 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 21/23] mmc: sdhci-esdhc-imx: factor out hw related intialization into function Dong Aisheng
2016-05-10 12:15 ` Adrian Hunter
2016-05-26 11:45 ` Dong Aisheng
2016-04-15 17:29 ` [PATCH 22/23] mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit function Dong Aisheng
2016-05-10 13:07 ` Adrian Hunter
2016-04-15 17:29 ` [PATCH 23/23] mmc: sdhci-esdhc-imx: clear tuning bits during hwinit Dong Aisheng
2016-05-10 13:10 ` Adrian Hunter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=573185FC.5060506@intel.com \
--to=adrian.hunter@intel.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).