From mboxrd@z Thu Jan 1 00:00:00 1970 From: vladimir.murzin@arm.com (Vladimir Murzin) Date: Fri, 13 May 2016 09:35:18 +0100 Subject: [PATCH] serial: Make SERIAL_MPS2_UART depend on ARCH_MPS2 In-Reply-To: <1462906570-27684-1-git-send-email-geert+renesas@glider.be> References: <1462906570-27684-1-git-send-email-geert+renesas@glider.be> Message-ID: <573591C6.1070106@arm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On 10/05/16 19:56, Geert Uytterhoeven wrote: > Enabling support for the UART on the ARM MPS2 platform only make sense > when compiling for the ARM MPS2 platform, unless compile-testing. What you said is true, but looking around (see SERIAL_STM32 for example) I'm wondering what makes MPS2 so special flake? I was under impression that architecture/board specific guard must have only if we have something like #include or #include which is not a case for device-tree driven MPS2 uart. I have no idea what is practice for such things, so would be grateful to get it known. Cheers Vladimir > > Signed-off-by: Geert Uytterhoeven > --- > drivers/tty/serial/Kconfig | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig > index b84810aa8621d8b1..3def7478ca44f573 100644 > --- a/drivers/tty/serial/Kconfig > +++ b/drivers/tty/serial/Kconfig > @@ -1457,7 +1457,7 @@ config SERIAL_MPS2_UART_CONSOLE > > config SERIAL_MPS2_UART > bool "MPS2 UART port" > - depends on ARM || COMPILE_TEST > + depends on ARCH_MPS2 || COMPILE_TEST > select SERIAL_CORE > help > This driver support the UART ports on ARM MPS2. >