* [PATCH 0108/1529] Fix typo
@ 2016-05-21 11:50 Andrea Gelmini
2016-05-21 12:00 ` Ivaylo Dimitrov
2016-06-10 11:18 ` Tony Lindgren
0 siblings, 2 replies; 3+ messages in thread
From: Andrea Gelmini @ 2016-05-21 11:50 UTC (permalink / raw)
To: linux-arm-kernel
Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
---
arch/arm/mach-omap2/sdrc.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 645a2a4..f115006 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
* don't adjust it down as your clock period increases the refresh interval
* will not be met. Setting all parameters for complete worst case may work,
* but may cut memory performance by 2x. Due to errata the DLLs need to be
- * unlocked and their value needs run time calibration. A dynamic call is
- * need for that as no single right value exists acorss production samples.
+ * unlocked and their value needs run time calibration. A dynamic call is
+ * need for that as no single right value exists across production samples.
*
* Only the FULL speed values are given. Current code is such that rate
* changes must be made at DPLLoutx2. The actual value adjustment for low
--
2.8.2.534.g1f66975
^ permalink raw reply related [flat|nested] 3+ messages in thread
* [PATCH 0108/1529] Fix typo
2016-05-21 11:50 [PATCH 0108/1529] Fix typo Andrea Gelmini
@ 2016-05-21 12:00 ` Ivaylo Dimitrov
2016-06-10 11:18 ` Tony Lindgren
1 sibling, 0 replies; 3+ messages in thread
From: Ivaylo Dimitrov @ 2016-05-21 12:00 UTC (permalink / raw)
To: linux-arm-kernel
On 21.05.2016 14:50, Andrea Gelmini wrote:
> Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
> ---
> arch/arm/mach-omap2/sdrc.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
> index 645a2a4..f115006 100644
> --- a/arch/arm/mach-omap2/sdrc.h
> +++ b/arch/arm/mach-omap2/sdrc.h
> @@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
> * don't adjust it down as your clock period increases the refresh interval
> * will not be met. Setting all parameters for complete worst case may work,
> * but may cut memory performance by 2x. Due to errata the DLLs need to be
> - * unlocked and their value needs run time calibration. A dynamic call is
> - * need for that as no single right value exists acorss production samples.
> + * unlocked and their value needs run time calibration. A dynamic call is
> + * need for that as no single right value exists across production samples.
needed?
> *
> * Only the FULL speed values are given. Current code is such that rate
> * changes must be made at DPLLoutx2. The actual value adjustment for low
>
^ permalink raw reply [flat|nested] 3+ messages in thread
* [PATCH 0108/1529] Fix typo
2016-05-21 11:50 [PATCH 0108/1529] Fix typo Andrea Gelmini
2016-05-21 12:00 ` Ivaylo Dimitrov
@ 2016-06-10 11:18 ` Tony Lindgren
1 sibling, 0 replies; 3+ messages in thread
From: Tony Lindgren @ 2016-06-10 11:18 UTC (permalink / raw)
To: linux-arm-kernel
* Andrea Gelmini <andrea.gelmini@gelma.net> [160521 04:52]:
> --- a/arch/arm/mach-omap2/sdrc.h
> +++ b/arch/arm/mach-omap2/sdrc.h
> @@ -175,8 +175,8 @@ u32 omap2xxx_sdrc_reprogram(u32 level, u32 force);
> * don't adjust it down as your clock period increases the refresh interval
> * will not be met. Setting all parameters for complete worst case may work,
> * but may cut memory performance by 2x. Due to errata the DLLs need to be
> - * unlocked and their value needs run time calibration. A dynamic call is
> - * need for that as no single right value exists acorss production samples.
> + * unlocked and their value needs run time calibration. A dynamic call is
> + * need for that as no single right value exists across production samples.
Applying patches 102 - 108 into omap-for-v4.8/soc thanks.
Tony
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-06-10 11:18 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-05-21 11:50 [PATCH 0108/1529] Fix typo Andrea Gelmini
2016-05-21 12:00 ` Ivaylo Dimitrov
2016-06-10 11:18 ` Tony Lindgren
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).