From: daniel.lezcano@linaro.org (Daniel Lezcano)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 4/5] clocksource: rockchip: add support for rk3399 SoC
Date: Tue, 31 May 2016 01:28:52 +0200 [thread overview]
Message-ID: <574CCCB4.1030001@linaro.org> (raw)
In-Reply-To: <1464169802-6033-5-git-send-email-wxt@rock-chips.com>
On 05/25/2016 11:50 AM, Caesar Wang wrote:
> From: Huang Tao <huangtao@rock-chips.com>
>
> The CONTROL register offset is different from old SoCs.
> For Linux driver, there are not functional changes at all.
> Let's call it v2.
>
> Signed-off-by: Huang Tao <huangtao@rock-chips.com>
> Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
> Cc: Thomas Gleixner <tglx@linutronix.de>
> Cc: Heiko Stuebner <heiko@sntech.de>
> Tested-by: Jianqun Xu <jay.xu@rock-chips.com>
> Signed-off-by: Caesar Wang <wxt@rock-chips.com>
> ---
That's hackish.
Please consider something like:
diff --git a/drivers/clocksource/rockchip_timer.c
b/drivers/clocksource/rockchip_timer.c
index b991b28..b6ba6f9 100644
--- a/drivers/clocksource/rockchip_timer.c
+++ b/drivers/clocksource/rockchip_timer.c
@@ -19,7 +19,8 @@
#define TIMER_LOAD_COUNT0 0x00
#define TIMER_LOAD_COUNT1 0x04
-#define TIMER_CONTROL_REG 0x10
+#define TIMER_CONTROL_REG3288 0x10
+#define TIMER_CONTROL_REG3399 0x1C
#define TIMER_INT_STATUS 0x18
#define TIMER_DISABLE 0x0
@@ -31,6 +32,7 @@
struct bc_timer {
struct clock_event_device ce;
void __iomem *base;
+ void __iomem *ctrl;
u32 freq;
};
@@ -46,15 +48,20 @@ static inline void __iomem *rk_base(struct
clock_event_device *ce)
return rk_timer(ce)->base;
}
+static inline void __iomem *rk_ctrl(struct clock_event_device *ce)
+{
+ return rk_timer(ce)->ctrl;
+}
+
static inline void rk_timer_disable(struct clock_event_device *ce)
{
- writel_relaxed(TIMER_DISABLE, rk_base(ce) + TIMER_CONTROL_REG);
+ writel_relaxed(TIMER_DISABLE, rk_ctrl(ce));
}
static inline void rk_timer_enable(struct clock_event_device *ce, u32
flags)
{
writel_relaxed(TIMER_ENABLE | TIMER_INT_UNMASK | flags,
- rk_base(ce) + TIMER_CONTROL_REG);
+ rk_ctrl(ce));
}
static void rk_timer_update_counter(unsigned long cycles,
@@ -179,4 +186,18 @@ out_unmap:
iounmap(bc_timer.base);
}
-CLOCKSOURCE_OF_DECLARE(rk_timer, "rockchip,rk3288-timer", rk_timer_init);
+static void __init rk3288_timer_init(struct device_node *np)
+{
+ bc_timer.ctrl = TIMER_CONTROL_REG3288;
+ rk_timer_init(np);
+}
+
+static void __init rk3399_timer_init(struct device_node *np)
+{
+ bc_timer.ctrl = TIMER_CONTROL_REG3399;
+ rk_timer_init(np);
+}
+
+
+CLOCKSOURCE_OF_DECLARE(rk_timer, "rockchip,rk3288-timer",
rk3288_timer_init);
+CLOCKSOURCE_OF_DECLARE(rk_timer, "rockchip,rk3399-timer",
rk3399_timer_init);
--
<http://www.linaro.org/> Linaro.org ? Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2016-05-30 23:28 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-05-25 9:49 [PATCH 0/5] clocksource: rockchip/timer: Support rktimer for rk3399 Caesar Wang
2016-05-25 9:49 ` [PATCH 1/5] dt-bindings: document rk3399 rk-timer bindings Caesar Wang
2016-05-25 19:11 ` Rob Herring
2016-05-25 9:49 ` [PATCH 2/5] clocksource: rockchip: remove unnecessary clear irq before request_irq Caesar Wang
2016-05-30 23:09 ` Daniel Lezcano
2016-05-31 17:03 ` Doug Anderson
2016-06-01 2:30 ` Huang, Tao
2016-06-01 2:36 ` Doug Anderson
2016-05-25 9:50 ` [PATCH 3/5] clocksource: rockchip: add dynamic irq flag to the timer Caesar Wang
2016-05-30 23:16 ` Daniel Lezcano
2016-05-31 13:45 ` Huang, Tao
2016-05-25 9:50 ` [PATCH 4/5] clocksource: rockchip: add support for rk3399 SoC Caesar Wang
2016-05-30 23:28 ` Daniel Lezcano [this message]
2016-05-31 13:46 ` Huang, Tao
2016-05-31 14:06 ` Daniel Lezcano
2016-06-01 1:58 ` Huang, Tao
2016-06-01 6:16 ` Daniel Lezcano
2016-05-25 9:50 ` [PATCH 5/5] ARM64: dts: rockchip: add rktimer device node for rk3399 Caesar Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=574CCCB4.1030001@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).