[PATCH 0/7] ARM: multi_v7_defconfig: Add more Broadcom SoCs

[PATCH 0/7] ARM: multi_v7_defconfig: Add more Broadcom SoCs

[Florian Fainelli]

This patch series enables more fundamental drivers which are useful for
Broadcom BCM63xx and BCM7xxx SoCs.

The last patch remove bcm_defconfig which is causing a whole lot of confusiong
at best and is completely out of sync now.

Florian Fainelli (7):
  ARM: multi_v7_defconfig: Enable BCM63xx
  ARM: multi_v7_defconfig: Enable BRCMSTB networking
  ARM: multi_v7_defconfig: Enable BRCMSTB AHCI
  ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
  ARM: multi_v7_defconfig: Enable Broadcom STB PWM
  ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
  ARM: Remove bcm_defconfig

 arch/arm/configs/bcm_defconfig      | 142 ------------------------------------
 arch/arm/configs/multi_v7_defconfig |  13 ++++
 2 files changed, 13 insertions(+), 142 deletions(-)
 delete mode 100644 arch/arm/configs/bcm_defconfig

-- 
2.7.4

[PATCH 1/7] ARM: multi_v7_defconfig: Enable BCM63xx

[Florian Fainelli]

Enable ARCH_BCM_63XX to build ARM-specific boot and SMP code, as well as
the serial console driver for this platform.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/configs/multi_v7_defconfig | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 8f857564657f..968a7ec08633 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -36,6 +36,7 @@ CONFIG_ARCH_BCM_21664=y
 CONFIG_ARCH_BCM_281XX=y
 CONFIG_ARCH_BCM_5301X=y
 CONFIG_ARCH_BCM2835=y
+CONFIG_ARCH_BCM_63XX=y
 CONFIG_ARCH_BRCMSTB=y
 CONFIG_ARCH_BERLIN=y
 CONFIG_MACH_BERLIN_BG2=y
@@ -291,6 +292,8 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_SERIAL_ATMEL=y
 CONFIG_SERIAL_ATMEL_CONSOLE=y
 CONFIG_SERIAL_ATMEL_TTYAT=y
+CONFIG_SERIAL_BCM63XX=y
+CONFIG_SERIAL_BCM63XX_CONSOLE=y
 CONFIG_SERIAL_MESON=y
 CONFIG_SERIAL_MESON_CONSOLE=y
 CONFIG_SERIAL_SAMSUNG=y
-- 
2.7.4

[PATCH 2/7] ARM: multi_v7_defconfig: Enable BRCMSTB networking

[Florian Fainelli]

Enable the required drivers and subsystems to bring-up networking on
Broadcom's Set-top Box SoCs: BCMGENET and SF2. These two drivers both
have proper dependencies on their internal PHY and MDIO drivers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/configs/multi_v7_defconfig | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 968a7ec08633..31ed7318f406 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -158,6 +158,8 @@ CONFIG_INET6_IPCOMP=m
 CONFIG_IPV6_MIP6=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_NET_DSA=m
+CONFIG_NET_SWITCHDEV=y
 CONFIG_CAN=y
 CONFIG_CAN_RAW=y
 CONFIG_CAN_BCM=y
@@ -166,6 +168,7 @@ CONFIG_CAN_AT91=m
 CONFIG_CAN_RCAR=m
 CONFIG_CAN_XILINXCAN=y
 CONFIG_CAN_MCP251X=y
+CONFIG_NET_DSA_BCM_SF2=m
 CONFIG_CAN_SUN4I=y
 CONFIG_BT=m
 CONFIG_BT_MRVL=m
@@ -225,6 +228,8 @@ CONFIG_VIRTIO_NET=y
 CONFIG_HIX5HD2_GMAC=y
 CONFIG_SUN4I_EMAC=y
 CONFIG_MACB=y
+CONFIG_BCMGENET=m
+CONFIG_SYSTEMPORT=m
 CONFIG_NET_CALXEDA_XGMAC=y
 CONFIG_GIANFAR=y
 CONFIG_IGB=y
-- 
2.7.4

[PATCH 3/7] ARM: multi_v7_defconfig: Enable BRCMSTB AHCI

[Florian Fainelli]

Enable the Broadcom STB AHCI driver and its companion PHY driver to get
functional SATA3 support.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/configs/multi_v7_defconfig | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 31ed7318f406..07ad8f9a033b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -217,6 +217,7 @@ CONFIG_SCSI_MULTI_LUN=y
 CONFIG_ATA=y
 CONFIG_SATA_AHCI=y
 CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_AHCI_BRCMSTB=y
 CONFIG_AHCI_ST=y
 CONFIG_AHCI_SUNXI=y
 CONFIG_AHCI_TEGRA=y
@@ -830,6 +831,7 @@ CONFIG_PHY_SUN4I_USB=y
 CONFIG_PHY_SUN9I_USB=y
 CONFIG_PHY_SAMSUNG_USB2=m
 CONFIG_PHY_TEGRA_XUSB=y
+CONFIG_PHY_BRCMSTB_SATA=y
 CONFIG_NVMEM=y
 CONFIG_NVMEM_SUNXI_SID=y
 CONFIG_BCM2835_MBOX=y
-- 
2.7.4

[PATCH 4/7] ARM: multi_v7_defconfig: Enable BCM7038 Watchdog

[Florian Fainelli]

The BCM7038 watchdog is used by all Broadcom STB SoCs but is not needed
for system reboot, we just turn it on as a module.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 07ad8f9a033b..13e5af6334ac 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -457,6 +457,7 @@ CONFIG_MESON_WATCHDOG=y
 CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
+CONFIG_BCM7038_WDT=m
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_ATMEL_FLEXCOM=y
-- 
2.7.4

[PATCH 5/7] ARM: multi_v7_defconfig: Enable Broadcom STB PWM

[Florian Fainelli]

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 13e5af6334ac..b59081bda51b 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -816,6 +816,7 @@ CONFIG_PWM_VT8500=y
 CONFIG_PHY_HIX5HD2_SATA=y
 CONFIG_PWM_STI=y
 CONFIG_PWM_BCM2835=y
+CONFIG_PWM_BRCMSTB=m
 CONFIG_OMAP_USB2=y
 CONFIG_TI_PIPE3=y
 CONFIG_PHY_BERLIN_USB=y
-- 
2.7.4

[PATCH 6/7] ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog

[Florian Fainelli]

In order to get rid of bcm_defconfig, enable this driver which is needed
by some Broadcom SoCs based on the Kona architecture to reboot.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/configs/multi_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index b59081bda51b..d180b6694374 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -458,6 +458,7 @@ CONFIG_DW_WATCHDOG=y
 CONFIG_DIGICOLOR_WATCHDOG=y
 CONFIG_BCM2835_WDT=y
 CONFIG_BCM7038_WDT=m
+CONFIG_BCM_KONA_WDT=y
 CONFIG_MFD_AS3711=y
 CONFIG_MFD_AS3722=y
 CONFIG_MFD_ATMEL_FLEXCOM=y
-- 
2.7.4

[PATCH 7/7] ARM: Remove bcm_defconfig

[Florian Fainelli]

We have everything we need in multi_v7_defconfig that exists in
bcm_defconfig, so get rid of that file to reduce the maintenance burden.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
 arch/arm/configs/bcm_defconfig | 142 -----------------------------------------
 1 file changed, 142 deletions(-)
 delete mode 100644 arch/arm/configs/bcm_defconfig

diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
deleted file mode 100644
index 7117662bab2e..000000000000
--- a/arch/arm/configs/bcm_defconfig
+++ /dev/null
@@ -1,142 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=19
-CONFIG_CGROUPS=y
-CONFIG_CGROUP_FREEZER=y
-CONFIG_CGROUP_DEVICE=y
-CONFIG_CGROUP_CPUACCT=y
-CONFIG_RESOURCE_COUNTERS=y
-CONFIG_CGROUP_SCHED=y
-CONFIG_BLK_CGROUP=y
-CONFIG_NAMESPACES=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_21664=y
-CONFIG_ARCH_BCM_281XX=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_SMP=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-# CONFIG_COMPACTION is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200n8 mem=128M"
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_DIAG=y
-CONFIG_UNIX=y
-CONFIG_UNIX_DIAG=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_SYN_COOKIES=y
-CONFIG_TCP_MD5SIG=y
-CONFIG_IPV6=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_PROC_DEVICETREE=y
-# CONFIG_BLK_DEV is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_INPUT_FF_MEMLESS=y
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_UINPUT=y
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_SERIAL_8250_DW=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-# CONFIG_HWMON is not set
-CONFIG_MFD_BCM590XX=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_USERSPACE_CONSUMER=y
-CONFIG_REGULATOR_BCM590XX=y
-
-CONFIG_VIDEO_OUTPUT_CONTROL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_PWM=y
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK_MINORS=32
-CONFIG_MMC_TEST=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_BCM_KONA=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_PWM=y
-CONFIG_PWM_BCM_KONA=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_CONFIGFS_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=110
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-# CONFIG_FTRACE is not set
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC_CCITT=y
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
-CONFIG_CRC7=y
-CONFIG_XZ_DEC=y
-CONFIG_AVERAGE=y
-CONFIG_PINCTRL_BCM281XX=y
-CONFIG_WATCHDOG=y
-CONFIG_BCM_KONA_WDT=y
-CONFIG_BCM_KONA_WDT_DEBUG=y
-- 
2.7.4

[PATCH 0/7] ARM: multi_v7_defconfig: Add more Broadcom SoCs

[Scott Branden]

Hi Florian,

On 16-05-20 12:07 PM, Florian Fainelli wrote:
> This patch series enables more fundamental drivers which are useful for
> Broadcom BCM63xx and BCM7xxx SoCs.
>
> The last patch remove bcm_defconfig which is causing a whole lot of confusiong
> at best and is completely out of sync now.
>
> Florian Fainelli (7):
>    ARM: multi_v7_defconfig: Enable BCM63xx
>    ARM: multi_v7_defconfig: Enable BRCMSTB networking
>    ARM: multi_v7_defconfig: Enable BRCMSTB AHCI
>    ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
>    ARM: multi_v7_defconfig: Enable Broadcom STB PWM
>    ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
>    ARM: Remove bcm_defconfig

Patch series looks good.  Given we can't upstream a defconfig per SoC 
family, bcm_defconfig is quite useless and can be removed.

Acked-by: Scott Branden <scott.branden@broadcom.com>
>
>   arch/arm/configs/bcm_defconfig      | 142 ------------------------------------
>   arch/arm/configs/multi_v7_defconfig |  13 ++++
>   2 files changed, 13 insertions(+), 142 deletions(-)
>   delete mode 100644 arch/arm/configs/bcm_defconfig
>

[PATCH 0/7] ARM: multi_v7_defconfig: Add more Broadcom SoCs

[Florian Fainelli]

On 05/20/2016 01:36 PM, Scott Branden wrote:
> Hi Florian,
> 
> On 16-05-20 12:07 PM, Florian Fainelli wrote:
>> This patch series enables more fundamental drivers which are useful for
>> Broadcom BCM63xx and BCM7xxx SoCs.
>>
>> The last patch remove bcm_defconfig which is causing a whole lot of
>> confusiong
>> at best and is completely out of sync now.
>>
>> Florian Fainelli (7):
>>    ARM: multi_v7_defconfig: Enable BCM63xx
>>    ARM: multi_v7_defconfig: Enable BRCMSTB networking
>>    ARM: multi_v7_defconfig: Enable BRCMSTB AHCI
>>    ARM: multi_v7_defconfig: Enable BCM7038 Watchdog
>>    ARM: multi_v7_defconfig: Enable Broadcom STB PWM
>>    ARM: multi_v7_defconfig: Enable Broadcom Kona watchdog
>>    ARM: Remove bcm_defconfig
> 
> Patch series looks good.  Given we can't upstream a defconfig per SoC
> family, bcm_defconfig is quite useless and can be removed.
> 
> Acked-by: Scott Branden <scott.branden@broadcom.com>

Series applied, thanks!
-- 
Florian