[PATCH V6 0/8] vfio, platform: add ACPI support

[PATCH V6 0/8] vfio, platform: add ACPI support

[Sinan Kaya]

The device tree code checks for the presence of a reset driver and calls
the of_reset function pointer by looking up the reset driver as a module.

ACPI defines _RST method to perform device level reset. After the _RST
method is executed, the OS can resume using the device.

This patch checks the presence of _RST method and calls the _RST
method when reset is requested.

Changes from V5:
1. Handle reset function call failures in open and release (new patch).
2. Bring out extra debug information when failure happens (new patch).
3. Address review comments from Eric in ACPI _RST patch.

Sinan Kaya (8):
  vfio: platform: move reset call to a common function
  vfio: platform: determine reset capability
  vfio: platform: add support for ACPI probe
  vfio: platform: add extra debug info argument to call reset
  vfio: platform: call _RST method when using ACPI
  vfio, platform: make reset driver a requirement by default
  vfio: platform: check reset call return code during open
  vfio: platform: check reset call return code during release

 drivers/vfio/platform/vfio_amba.c             |   5 +
 drivers/vfio/platform/vfio_platform.c         |   5 +
 drivers/vfio/platform/vfio_platform_common.c  | 169 ++++++++++++++++++++++----
 drivers/vfio/platform/vfio_platform_private.h |   2 +
 4 files changed, 159 insertions(+), 22 deletions(-)

-- 
1.8.2.1

[PATCH V6 1/8] vfio: platform: move reset call to a common function

[Sinan Kaya]

The reset call sequence seems to replicate itself multiple times
across the file. Grouping them together for maintenance reasons.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
---
 drivers/vfio/platform/vfio_platform_common.c | 30 +++++++++++++---------------
 1 file changed, 14 insertions(+), 16 deletions(-)

diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index 08fd7c2..3e2a7c0 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -134,6 +134,17 @@ static void vfio_platform_regions_cleanup(struct vfio_platform_device *vdev)
 	kfree(vdev->regions);
 }
 
+static int vfio_platform_call_reset(struct vfio_platform_device *vdev)
+{
+	if (vdev->of_reset) {
+		dev_info(vdev->device, "reset\n");
+		return vdev->of_reset(vdev);
+	}
+
+	dev_warn(vdev->device, "no reset function found!\n");
+	return -EINVAL;
+}
+
 static void vfio_platform_release(void *device_data)
 {
 	struct vfio_platform_device *vdev = device_data;
@@ -141,12 +152,7 @@ static void vfio_platform_release(void *device_data)
 	mutex_lock(&driver_lock);
 
 	if (!(--vdev->refcnt)) {
-		if (vdev->of_reset) {
-			dev_info(vdev->device, "reset\n");
-			vdev->of_reset(vdev);
-		} else {
-			dev_warn(vdev->device, "no reset function found!\n");
-		}
+		vfio_platform_call_reset(vdev);
 		vfio_platform_regions_cleanup(vdev);
 		vfio_platform_irq_cleanup(vdev);
 	}
@@ -175,12 +181,7 @@ static int vfio_platform_open(void *device_data)
 		if (ret)
 			goto err_irq;
 
-		if (vdev->of_reset) {
-			dev_info(vdev->device, "reset\n");
-			vdev->of_reset(vdev);
-		} else {
-			dev_warn(vdev->device, "no reset function found!\n");
-		}
+		vfio_platform_call_reset(vdev);
 	}
 
 	vdev->refcnt++;
@@ -312,10 +313,7 @@ static long vfio_platform_ioctl(void *device_data,
 		return ret;
 
 	} else if (cmd == VFIO_DEVICE_RESET) {
-		if (vdev->of_reset)
-			return vdev->of_reset(vdev);
-		else
-			return -EINVAL;
+		return vfio_platform_call_reset(vdev);
 	}
 
 	return -ENOTTY;
-- 
1.8.2.1

[PATCH V6 2/8] vfio: platform: determine reset capability

[Sinan Kaya]

Creating a new function to determine if this driver supports reset
function or not. This is an attempt to abstract device tree calls
from the rest of the code.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
---
 drivers/vfio/platform/vfio_platform_common.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index 3e2a7c0..6be92c3 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -49,6 +49,11 @@ static vfio_platform_reset_fn_t vfio_platform_lookup_reset(const char *compat,
 	return reset_fn;
 }
 
+static bool vfio_platform_has_reset(struct vfio_platform_device *vdev)
+{
+	return vdev->of_reset ? true : false;
+}
+
 static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
 {
 	vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
@@ -214,7 +219,7 @@ static long vfio_platform_ioctl(void *device_data,
 		if (info.argsz < minsz)
 			return -EINVAL;
 
-		if (vdev->of_reset)
+		if (vfio_platform_has_reset(vdev))
 			vdev->flags |= VFIO_DEVICE_FLAGS_RESET;
 		info.flags = vdev->flags;
 		info.num_regions = vdev->num_regions;
-- 
1.8.2.1

[PATCH V6 3/8] vfio: platform: add support for ACPI probe

[Sinan Kaya]

The code is using the compatible DT string to associate a reset driver
with the actual device itself. The compatible string does not exist on
ACPI based systems. HID is the unique identifier for a device driver
instead.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/vfio/platform/vfio_platform_common.c  | 57 ++++++++++++++++++++++++---
 drivers/vfio/platform/vfio_platform_private.h |  1 +
 2 files changed, 53 insertions(+), 5 deletions(-)

diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index 6be92c3..fbf4565 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -13,6 +13,7 @@
  */
 
 #include <linux/device.h>
+#include <linux/acpi.h>
 #include <linux/iommu.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -49,6 +50,37 @@ static vfio_platform_reset_fn_t vfio_platform_lookup_reset(const char *compat,
 	return reset_fn;
 }
 
+#ifdef CONFIG_ACPI
+static int vfio_platform_acpi_probe(struct vfio_platform_device *vdev,
+				    struct device *dev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(dev);
+
+	if (acpi_disabled)
+		return -ENODEV;
+
+	if (!adev) {
+		pr_err("VFIO: ACPI companion device not found for %s\n",
+			vdev->name);
+		return -ENODEV;
+	}
+
+	vdev->acpihid = acpi_device_hid(adev);
+	if (!vdev->acpihid) {
+		pr_err("VFIO: cannot find ACPI HID for %s\n",
+		       vdev->name);
+		return -ENODEV;
+	}
+	return 0;
+}
+#else
+static inline int vfio_platform_acpi_probe(struct vfio_platform_device *vdev,
+					   struct device *dev)
+{
+	return -ENOENT;
+}
+#endif
+
 static bool vfio_platform_has_reset(struct vfio_platform_device *vdev)
 {
 	return vdev->of_reset ? true : false;
@@ -547,6 +579,20 @@ static const struct vfio_device_ops vfio_platform_ops = {
 	.mmap		= vfio_platform_mmap,
 };
 
+int vfio_platform_of_probe(struct vfio_platform_device *vdev,
+			   struct device *dev)
+{
+	int ret;
+
+	ret = device_property_read_string(dev, "compatible",
+					  &vdev->compat);
+	if (ret)
+		pr_err("VFIO: cannot retrieve compat for %s\n",
+			vdev->name);
+
+	return ret;
+}
+
 int vfio_platform_probe_common(struct vfio_platform_device *vdev,
 			       struct device *dev)
 {
@@ -556,11 +602,12 @@ int vfio_platform_probe_common(struct vfio_platform_device *vdev,
 	if (!vdev)
 		return -EINVAL;
 
-	ret = device_property_read_string(dev, "compatible", &vdev->compat);
-	if (ret) {
-		pr_err("VFIO: cannot retrieve compat for %s\n", vdev->name);
-		return -EINVAL;
-	}
+	ret = vfio_platform_acpi_probe(vdev, dev);
+	if (ret)
+		ret = vfio_platform_of_probe(vdev, dev);
+
+	if (ret)
+		return ret;
 
 	vdev->device = dev;
 
diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
index 71ed7d1..ba9e4f8 100644
--- a/drivers/vfio/platform/vfio_platform_private.h
+++ b/drivers/vfio/platform/vfio_platform_private.h
@@ -58,6 +58,7 @@ struct vfio_platform_device {
 	struct mutex			igate;
 	struct module			*parent_module;
 	const char			*compat;
+	const char			*acpihid;
 	struct module			*reset_module;
 	struct device			*device;
 
-- 
1.8.2.1

[PATCH V6 4/8] vfio: platform: add extra debug info argument to call reset

[Sinan Kaya]

Getting ready to bring out extra debug information to the caller
so that more verbose information can be printed when an error is
observed.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/vfio/platform/vfio_platform_common.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index fbf4565..e7ce2c2 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -171,7 +171,8 @@ static void vfio_platform_regions_cleanup(struct vfio_platform_device *vdev)
 	kfree(vdev->regions);
 }
 
-static int vfio_platform_call_reset(struct vfio_platform_device *vdev)
+static int vfio_platform_call_reset(struct vfio_platform_device *vdev,
+				    const char **extra_dbg)
 {
 	if (vdev->of_reset) {
 		dev_info(vdev->device, "reset\n");
@@ -189,7 +190,7 @@ static void vfio_platform_release(void *device_data)
 	mutex_lock(&driver_lock);
 
 	if (!(--vdev->refcnt)) {
-		vfio_platform_call_reset(vdev);
+		vfio_platform_call_reset(vdev, NULL);
 		vfio_platform_regions_cleanup(vdev);
 		vfio_platform_irq_cleanup(vdev);
 	}
@@ -218,7 +219,7 @@ static int vfio_platform_open(void *device_data)
 		if (ret)
 			goto err_irq;
 
-		vfio_platform_call_reset(vdev);
+		vfio_platform_call_reset(vdev, NULL);
 	}
 
 	vdev->refcnt++;
@@ -350,7 +351,7 @@ static long vfio_platform_ioctl(void *device_data,
 		return ret;
 
 	} else if (cmd == VFIO_DEVICE_RESET) {
-		return vfio_platform_call_reset(vdev);
+		return vfio_platform_call_reset(vdev, NULL);
 	}
 
 	return -ENOTTY;
-- 
1.8.2.1

[PATCH V6 5/8] vfio: platform: call _RST method when using ACPI

[Sinan Kaya]

The device tree code checks for the presence of a reset driver and calls
the of_reset function pointer by looking up the reset driver as a module.

ACPI defines _RST method to perform device level reset. After the _RST
method is executed, the OS can resume using the device. _RST method is
expected to stop DMA transfers and IRQs.

This patch checks the presence of _RST method and calls the _RST
method when reset is requested.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reviewed-by: Eric Auger <eric.auger@linaro.org>
---
 drivers/vfio/platform/vfio_platform_common.c | 51 ++++++++++++++++++++++++++++
 1 file changed, 51 insertions(+)

diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index e7ce2c2..0ea8c26 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -73,21 +73,66 @@ static int vfio_platform_acpi_probe(struct vfio_platform_device *vdev,
 	}
 	return 0;
 }
+
+static int vfio_platform_acpi_call_reset(struct vfio_platform_device *vdev,
+					 const char **extra_dbg)
+{
+	struct device *dev = vdev->device;
+	acpi_handle handle = ACPI_HANDLE(dev);
+	acpi_status acpi_ret;
+	unsigned long long val;
+
+	acpi_ret = acpi_evaluate_integer(handle, "_RST", NULL, &val);
+	if (ACPI_FAILURE(acpi_ret)) {
+		if (extra_dbg)
+			*extra_dbg = acpi_format_exception(acpi_ret);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static bool vfio_platform_acpi_has_reset(struct vfio_platform_device *vdev)
+{
+	struct device *dev = vdev->device;
+	acpi_handle handle = ACPI_HANDLE(dev);
+
+	return acpi_has_method(handle, "_RST");
+}
 #else
 static inline int vfio_platform_acpi_probe(struct vfio_platform_device *vdev,
 					   struct device *dev)
 {
 	return -ENOENT;
 }
+
+static inline
+int vfio_platform_acpi_call_reset(struct vfio_platform_device *vdev,
+				  const char **extra_dbg)
+{
+	return -ENOENT;
+}
+
+static inline
+bool vfio_platform_acpi_has_reset(struct vfio_platform_device *vdev)
+{
+	return false;
+}
 #endif
 
 static bool vfio_platform_has_reset(struct vfio_platform_device *vdev)
 {
+	if (vdev->acpihid)
+		return vfio_platform_acpi_has_reset(vdev);
+
 	return vdev->of_reset ? true : false;
 }
 
 static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
 {
+	if (vdev->acpihid)
+		return;
+
 	vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
 						    &vdev->reset_module);
 	if (!vdev->of_reset) {
@@ -99,6 +144,9 @@ static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
 
 static void vfio_platform_put_reset(struct vfio_platform_device *vdev)
 {
+	if (vdev->acpihid)
+		return;
+
 	if (vdev->of_reset)
 		module_put(vdev->reset_module);
 }
@@ -177,6 +225,9 @@ static int vfio_platform_call_reset(struct vfio_platform_device *vdev,
 	if (vdev->of_reset) {
 		dev_info(vdev->device, "reset\n");
 		return vdev->of_reset(vdev);
+	} else if (vdev->acpihid) {
+		dev_info(vdev->device, "reset\n");
+		return vfio_platform_acpi_call_reset(vdev, extra_dbg);
 	}
 
 	dev_warn(vdev->device, "no reset function found!\n");
-- 
1.8.2.1

[PATCH V6 5/8] vfio: platform: call _RST method when using ACPI

[Auger Eric]

Hi Sinan,
Le 29/05/2016 ? 00:01, Sinan Kaya a ?crit :
> The device tree code checks for the presence of a reset driver and calls
> the of_reset function pointer by looking up the reset driver as a module.
> 
> ACPI defines _RST method to perform device level reset. After the _RST
> method is executed, the OS can resume using the device. _RST method is
> expected to stop DMA transfers and IRQs.
> 
> This patch checks the presence of _RST method and calls the _RST
> method when reset is requested.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> Reviewed-by: Eric Auger <eric.auger@linaro.org>
code has changed compared to previous version and the R-b. In the future, please add change logs.
Besides it looks ok to me.

Best Regards

Eric

> ---
>  drivers/vfio/platform/vfio_platform_common.c | 51 ++++++++++++++++++++++++++++
>  1 file changed, 51 insertions(+)
> 
> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> index e7ce2c2..0ea8c26 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -73,21 +73,66 @@ static int vfio_platform_acpi_probe(struct vfio_platform_device *vdev,
>  	}
>  	return 0;
>  }
> +
> +static int vfio_platform_acpi_call_reset(struct vfio_platform_device *vdev,
> +					 const char **extra_dbg)
> +{
> +	struct device *dev = vdev->device;
> +	acpi_handle handle = ACPI_HANDLE(dev);
> +	acpi_status acpi_ret;
> +	unsigned long long val;
> +
> +	acpi_ret = acpi_evaluate_integer(handle, "_RST", NULL, &val);
> +	if (ACPI_FAILURE(acpi_ret)) {
> +		if (extra_dbg)
> +			*extra_dbg = acpi_format_exception(acpi_ret);
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static bool vfio_platform_acpi_has_reset(struct vfio_platform_device *vdev)
> +{
> +	struct device *dev = vdev->device;
> +	acpi_handle handle = ACPI_HANDLE(dev);
> +
> +	return acpi_has_method(handle, "_RST");
> +}
>  #else
>  static inline int vfio_platform_acpi_probe(struct vfio_platform_device *vdev,
>  					   struct device *dev)
>  {
>  	return -ENOENT;
>  }
> +
> +static inline
> +int vfio_platform_acpi_call_reset(struct vfio_platform_device *vdev,
> +				  const char **extra_dbg)
> +{
> +	return -ENOENT;
> +}
> +
> +static inline
> +bool vfio_platform_acpi_has_reset(struct vfio_platform_device *vdev)
> +{
> +	return false;
> +}
>  #endif
>  
>  static bool vfio_platform_has_reset(struct vfio_platform_device *vdev)
>  {
> +	if (vdev->acpihid)
> +		return vfio_platform_acpi_has_reset(vdev);
> +
>  	return vdev->of_reset ? true : false;
>  }
>  
>  static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
>  {
> +	if (vdev->acpihid)
> +		return;
> +
>  	vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
>  						    &vdev->reset_module);
>  	if (!vdev->of_reset) {
> @@ -99,6 +144,9 @@ static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
>  
>  static void vfio_platform_put_reset(struct vfio_platform_device *vdev)
>  {
> +	if (vdev->acpihid)
> +		return;
> +
>  	if (vdev->of_reset)
>  		module_put(vdev->reset_module);
>  }
> @@ -177,6 +225,9 @@ static int vfio_platform_call_reset(struct vfio_platform_device *vdev,
>  	if (vdev->of_reset) {
>  		dev_info(vdev->device, "reset\n");
>  		return vdev->of_reset(vdev);
> +	} else if (vdev->acpihid) {
> +		dev_info(vdev->device, "reset\n");
> +		return vfio_platform_acpi_call_reset(vdev, extra_dbg);
>  	}
>  
>  	dev_warn(vdev->device, "no reset function found!\n");
> 

[PATCH V6 5/8] vfio: platform: call _RST method when using ACPI

[Rafael J. Wysocki]

On Sun, May 29, 2016 at 12:01 AM, Sinan Kaya <okaya@codeaurora.org> wrote:
> The device tree code checks for the presence of a reset driver and calls
> the of_reset function pointer by looking up the reset driver as a module.
>
> ACPI defines _RST method to perform device level reset. After the _RST
> method is executed, the OS can resume using the device. _RST method is
> expected to stop DMA transfers and IRQs.
>
> This patch checks the presence of _RST method and calls the _RST
> method when reset is requested.

You could check if _RST is present at probe time and store the ACPI
handle of it instead of the HID pointer.

This way you wouldn't need to repeat that check every time reset is used.

[PATCH V6 5/8] vfio: platform: call _RST method when using ACPI

[Sinan Kaya]

On 6/8/2016 6:31 PM, Rafael J. Wysocki wrote:
> On Sun, May 29, 2016 at 12:01 AM, Sinan Kaya <okaya@codeaurora.org> wrote:
>> The device tree code checks for the presence of a reset driver and calls
>> the of_reset function pointer by looking up the reset driver as a module.
>>
>> ACPI defines _RST method to perform device level reset. After the _RST
>> method is executed, the OS can resume using the device. _RST method is
>> expected to stop DMA transfers and IRQs.
>>
>> This patch checks the presence of _RST method and calls the _RST
>> method when reset is requested.
> 
> You could check if _RST is present at probe time and store the ACPI
> handle of it instead of the HID pointer.
> 
> This way you wouldn't need to repeat that check every time reset is used.
> 

Makes sense. I'll give it a shot.

-- 
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH V6 5/8] vfio: platform: call _RST method when using ACPI

[Sinan Kaya]

On 6/8/2016 6:31 PM, Rafael J. Wysocki wrote:
> On Sun, May 29, 2016 at 12:01 AM, Sinan Kaya <okaya@codeaurora.org> wrote:
>> The device tree code checks for the presence of a reset driver and calls
>> the of_reset function pointer by looking up the reset driver as a module.
>>
>> ACPI defines _RST method to perform device level reset. After the _RST
>> method is executed, the OS can resume using the device. _RST method is
>> expected to stop DMA transfers and IRQs.
>>
>> This patch checks the presence of _RST method and calls the _RST
>> method when reset is requested.
> 

A little bit of misinformation here. The current code is checking the presence
during probe time. If the presence of _RST method is required then probe is
aborted. Otherwise, probe will complete execution.

When reset call is to be executed, presence of _RST method is no longer checked.
Instead, the method is directly called. 

I was talking about the contribution of this patch as both here. I'll clarify
the commit message. 

> You could check if _RST is present at probe time and store the ACPI
> handle of it instead of the HID pointer.
> 
> This way you wouldn't need to repeat that check every time reset is used.
> 

Based on the requirement that the code can be executed without the presence
of _RST method for development purposes, I'm hesitant to use the handle of the
reset method as a gating factor.

-- 
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH V6 6/8] vfio, platform: make reset driver a requirement by default

[Sinan Kaya]

The code was allowing platform devices to be used without a supporting
VFIO reset driver. The hardware can be left in some inconsistent state
after a guest machine abort.

The reset driver will put the hardware back to safe state and disable
interrupts before returning the control back to the host machine.

Adding a new reset_required kernel module option to AMBA and platform
VFIO drivers with a default value of true.

New requirements are:
1. A reset function needs to be implemented by the corresponding driver
via DT/ACPI.
2. The reset function needs to be discovered via DT/ACPI.

The probe of the driver will fail if any of the above conditions are
not satisfied.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/vfio/platform/vfio_amba.c             |  5 +++++
 drivers/vfio/platform/vfio_platform.c         |  5 +++++
 drivers/vfio/platform/vfio_platform_common.c  | 14 +++++++++++---
 drivers/vfio/platform/vfio_platform_private.h |  1 +
 4 files changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/vfio/platform/vfio_amba.c b/drivers/vfio/platform/vfio_amba.c
index a66479b..7585902 100644
--- a/drivers/vfio/platform/vfio_amba.c
+++ b/drivers/vfio/platform/vfio_amba.c
@@ -23,6 +23,10 @@
 #define DRIVER_AUTHOR   "Antonios Motakis <a.motakis@virtualopensystems.com>"
 #define DRIVER_DESC     "VFIO for AMBA devices - User Level meta-driver"
 
+static bool reset_required = true;
+module_param(reset_required, bool, 0644);
+MODULE_PARM_DESC(reset_required, "override reset requirement (default: 1)");
+
 /* probing devices from the AMBA bus */
 
 static struct resource *get_amba_resource(struct vfio_platform_device *vdev,
@@ -68,6 +72,7 @@ static int vfio_amba_probe(struct amba_device *adev, const struct amba_id *id)
 	vdev->get_resource = get_amba_resource;
 	vdev->get_irq = get_amba_irq;
 	vdev->parent_module = THIS_MODULE;
+	vdev->reset_required = reset_required;
 
 	ret = vfio_platform_probe_common(vdev, &adev->dev);
 	if (ret) {
diff --git a/drivers/vfio/platform/vfio_platform.c b/drivers/vfio/platform/vfio_platform.c
index b1cc3a7..ef89146 100644
--- a/drivers/vfio/platform/vfio_platform.c
+++ b/drivers/vfio/platform/vfio_platform.c
@@ -23,6 +23,10 @@
 #define DRIVER_AUTHOR   "Antonios Motakis <a.motakis@virtualopensystems.com>"
 #define DRIVER_DESC     "VFIO for platform devices - User Level meta-driver"
 
+static bool reset_required = true;
+module_param(reset_required, bool, 0644);
+MODULE_PARM_DESC(reset_required, "override reset requirement (default: 1)");
+
 /* probing devices from the linux platform bus */
 
 static struct resource *get_platform_resource(struct vfio_platform_device *vdev,
@@ -66,6 +70,7 @@ static int vfio_platform_probe(struct platform_device *pdev)
 	vdev->get_resource = get_platform_resource;
 	vdev->get_irq = get_platform_irq;
 	vdev->parent_module = THIS_MODULE;
+	vdev->reset_required = reset_required;
 
 	ret = vfio_platform_probe_common(vdev, &pdev->dev);
 	if (ret)
diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index 0ea8c26..e87ceab 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -128,10 +128,10 @@ static bool vfio_platform_has_reset(struct vfio_platform_device *vdev)
 	return vdev->of_reset ? true : false;
 }
 
-static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
+static int vfio_platform_get_reset(struct vfio_platform_device *vdev)
 {
 	if (vdev->acpihid)
-		return;
+		return vfio_platform_acpi_has_reset(vdev) ? 0 : -ENOENT;
 
 	vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
 						    &vdev->reset_module);
@@ -140,6 +140,8 @@ static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
 		vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
 							&vdev->reset_module);
 	}
+
+	return vdev->of_reset ? 0 : -ENOENT;
 }
 
 static void vfio_platform_put_reset(struct vfio_platform_device *vdev)
@@ -675,7 +677,13 @@ int vfio_platform_probe_common(struct vfio_platform_device *vdev,
 		return ret;
 	}
 
-	vfio_platform_get_reset(vdev);
+	ret = vfio_platform_get_reset(vdev);
+	if (ret && vdev->reset_required) {
+		pr_err("vfio: no reset function found for device %s\n",
+		       vdev->name);
+		iommu_group_put(group);
+		return ret;
+	}
 
 	mutex_init(&vdev->igate);
 
diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
index ba9e4f8..68fbc00 100644
--- a/drivers/vfio/platform/vfio_platform_private.h
+++ b/drivers/vfio/platform/vfio_platform_private.h
@@ -50,6 +50,7 @@ struct vfio_platform_region {
 };
 
 struct vfio_platform_device {
+	bool				reset_required;
 	struct vfio_platform_region	*regions;
 	u32				num_regions;
 	struct vfio_platform_irq	*irqs;
-- 
1.8.2.1

[PATCH V6 6/8] vfio, platform: make reset driver a requirement by default

[Auger Eric]

Le 29/05/2016 ? 00:01, Sinan Kaya a ?crit :
> The code was allowing platform devices to be used without a supporting
> VFIO reset driver. The hardware can be left in some inconsistent state
> after a guest machine abort.
> 
> The reset driver will put the hardware back to safe state and disable
> interrupts before returning the control back to the host machine.
> 
> Adding a new reset_required kernel module option to AMBA and platform
> VFIO drivers with a default value of true.
> 
> New requirements are:
> 1. A reset function needs to be implemented by the corresponding driver
> via DT/ACPI.
> 2. The reset function needs to be discovered via DT/ACPI.
> 
> The probe of the driver will fail if any of the above conditions are
> not satisfied.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
>  drivers/vfio/platform/vfio_amba.c             |  5 +++++
>  drivers/vfio/platform/vfio_platform.c         |  5 +++++
>  drivers/vfio/platform/vfio_platform_common.c  | 14 +++++++++++---
>  drivers/vfio/platform/vfio_platform_private.h |  1 +
>  4 files changed, 22 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/vfio/platform/vfio_amba.c b/drivers/vfio/platform/vfio_amba.c
> index a66479b..7585902 100644
> --- a/drivers/vfio/platform/vfio_amba.c
> +++ b/drivers/vfio/platform/vfio_amba.c
> @@ -23,6 +23,10 @@
>  #define DRIVER_AUTHOR   "Antonios Motakis <a.motakis@virtualopensystems.com>"
>  #define DRIVER_DESC     "VFIO for AMBA devices - User Level meta-driver"
>  
> +static bool reset_required = true;
> +module_param(reset_required, bool, 0644);
> +MODULE_PARM_DESC(reset_required, "override reset requirement (default: 1)");
> +
>  /* probing devices from the AMBA bus */
>  
>  static struct resource *get_amba_resource(struct vfio_platform_device *vdev,
> @@ -68,6 +72,7 @@ static int vfio_amba_probe(struct amba_device *adev, const struct amba_id *id)
>  	vdev->get_resource = get_amba_resource;
>  	vdev->get_irq = get_amba_irq;
>  	vdev->parent_module = THIS_MODULE;
> +	vdev->reset_required = reset_required;
>  
>  	ret = vfio_platform_probe_common(vdev, &adev->dev);
>  	if (ret) {
> diff --git a/drivers/vfio/platform/vfio_platform.c b/drivers/vfio/platform/vfio_platform.c
> index b1cc3a7..ef89146 100644
> --- a/drivers/vfio/platform/vfio_platform.c
> +++ b/drivers/vfio/platform/vfio_platform.c
> @@ -23,6 +23,10 @@
>  #define DRIVER_AUTHOR   "Antonios Motakis <a.motakis@virtualopensystems.com>"
>  #define DRIVER_DESC     "VFIO for platform devices - User Level meta-driver"
>  
> +static bool reset_required = true;
> +module_param(reset_required, bool, 0644);
> +MODULE_PARM_DESC(reset_required, "override reset requirement (default: 1)");
> +
>  /* probing devices from the linux platform bus */
>  
>  static struct resource *get_platform_resource(struct vfio_platform_device *vdev,
> @@ -66,6 +70,7 @@ static int vfio_platform_probe(struct platform_device *pdev)
>  	vdev->get_resource = get_platform_resource;
>  	vdev->get_irq = get_platform_irq;
>  	vdev->parent_module = THIS_MODULE;
> +	vdev->reset_required = reset_required;
>  
>  	ret = vfio_platform_probe_common(vdev, &pdev->dev);
>  	if (ret)
> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> index 0ea8c26..e87ceab 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -128,10 +128,10 @@ static bool vfio_platform_has_reset(struct vfio_platform_device *vdev)
>  	return vdev->of_reset ? true : false;
>  }
>  
> -static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
> +static int vfio_platform_get_reset(struct vfio_platform_device *vdev)
>  {
>  	if (vdev->acpihid)
> -		return;
> +		return vfio_platform_acpi_has_reset(vdev) ? 0 : -ENOENT;
>  
>  	vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
>  						    &vdev->reset_module);
> @@ -140,6 +140,8 @@ static void vfio_platform_get_reset(struct vfio_platform_device *vdev)
>  		vdev->of_reset = vfio_platform_lookup_reset(vdev->compat,
>  							&vdev->reset_module);
>  	}
> +
> +	return vdev->of_reset ? 0 : -ENOENT;
>  }
>  
>  static void vfio_platform_put_reset(struct vfio_platform_device *vdev)
> @@ -675,7 +677,13 @@ int vfio_platform_probe_common(struct vfio_platform_device *vdev,
>  		return ret;
>  	}
>  
> -	vfio_platform_get_reset(vdev);
> +	ret = vfio_platform_get_reset(vdev);
> +	if (ret && vdev->reset_required) {
> +		pr_err("vfio: no reset function found for device %s\n",
> +		       vdev->name);
> +		iommu_group_put(group);
> +		return ret;
nit: in case you respin you can factorize the group put and return ret in a goto label
(since also used above).

Besides Reviewed-by: Eric Auger <eric.auger@redhat.com>

Thanks

Eric
> +	}
>  
>  	mutex_init(&vdev->igate);
>  
> diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
> index ba9e4f8..68fbc00 100644
> --- a/drivers/vfio/platform/vfio_platform_private.h
> +++ b/drivers/vfio/platform/vfio_platform_private.h
> @@ -50,6 +50,7 @@ struct vfio_platform_region {
>  };
>  
>  struct vfio_platform_device {
> +	bool				reset_required;
>  	struct vfio_platform_region	*regions;
>  	u32				num_regions;
>  	struct vfio_platform_irq	*irqs;
> 

[PATCH V6 6/8] vfio, platform: make reset driver a requirement by default

[Sinan Kaya]

On 6/7/2016 3:59 PM, Auger Eric wrote:
>> -	vfio_platform_get_reset(vdev);
>> > +	ret = vfio_platform_get_reset(vdev);
>> > +	if (ret && vdev->reset_required) {
>> > +		pr_err("vfio: no reset function found for device %s\n",
>> > +		       vdev->name);
>> > +		iommu_group_put(group);
>> > +		return ret;
> nit: in case you respin you can factorize the group put and return ret in a goto label
> (since also used above).
> 
> Besides Reviewed-by: Eric Auger <eric.auger@redhat.com>

thanks, done. I'll respin with your request.

-- 
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH V6 7/8] vfio: platform: check reset call return code during open

[Sinan Kaya]

Open call is ignoring the return code from reset call and can
potentially continue even though reset call failed.

If reset_required module parameter is set, this patch is going
to validate the return code and will abort open if reset fails.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/vfio/platform/vfio_platform_common.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index e87ceab..962cfb1 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -264,6 +264,8 @@ static int vfio_platform_open(void *device_data)
 	mutex_lock(&driver_lock);
 
 	if (!vdev->refcnt) {
+		const char *extra_dbg = NULL;
+
 		ret = vfio_platform_regions_init(vdev);
 		if (ret)
 			goto err_reg;
@@ -272,7 +274,12 @@ static int vfio_platform_open(void *device_data)
 		if (ret)
 			goto err_irq;
 
-		vfio_platform_call_reset(vdev, NULL);
+		ret = vfio_platform_call_reset(vdev, &extra_dbg);
+		if (ret && vdev->reset_required) {
+			dev_warn(vdev->device, "reset driver is required and reset call failed in open (%d) %s\n",
+				 ret, extra_dbg ? extra_dbg : "");
+			goto err_irq;
+		}
 	}
 
 	vdev->refcnt++;
-- 
1.8.2.1

[PATCH V6 7/8] vfio: platform: check reset call return code during open

[Auger Eric]

Hi Sinan,
Le 29/05/2016 ? 00:01, Sinan Kaya a ?crit :
> Open call is ignoring the return code from reset call and can
> potentially continue even though reset call failed.
> 
> If reset_required module parameter is set, this patch is going
> to validate the return code and will abort open if reset fails.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
>  drivers/vfio/platform/vfio_platform_common.c | 9 ++++++++-
>  1 file changed, 8 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> index e87ceab..962cfb1 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -264,6 +264,8 @@ static int vfio_platform_open(void *device_data)
>  	mutex_lock(&driver_lock);
>  
>  	if (!vdev->refcnt) {
> +		const char *extra_dbg = NULL;
> +
>  		ret = vfio_platform_regions_init(vdev);
>  		if (ret)
>  			goto err_reg;
> @@ -272,7 +274,12 @@ static int vfio_platform_open(void *device_data)
>  		if (ret)
>  			goto err_irq;
>  
> -		vfio_platform_call_reset(vdev, NULL);
> +		ret = vfio_platform_call_reset(vdev, &extra_dbg);
> +		if (ret && vdev->reset_required) {
> +			dev_warn(vdev->device, "reset driver is required and reset call failed in open (%d) %s\n",
> +				 ret, extra_dbg ? extra_dbg : "");
> +			goto err_irq;
I am afraid you need to tear down the resources allocated by vfio_platform_irq_init. 

Best Regards

Eric
> +		}
>  	}
>  
>  	vdev->refcnt++;
> 

[PATCH V6 7/8] vfio: platform: check reset call return code during open

[Sinan Kaya]

On 6/7/2016 4:21 PM, Auger Eric wrote:
>> -		vfio_platform_call_reset(vdev, NULL);
>> > +		ret = vfio_platform_call_reset(vdev, &extra_dbg);
>> > +		if (ret && vdev->reset_required) {
>> > +			dev_warn(vdev->device, "reset driver is required and reset call failed in open (%d) %s\n",
>> > +				 ret, extra_dbg ? extra_dbg : "");
>> > +			goto err_irq;
> I am afraid you need to tear down the resources allocated by vfio_platform_irq_init. 
> 
> Best Regards
> 
> Eric

I added this to the error path and replaced the goto above with err_rst.

+err_rst:
+        vfio_platform_irq_cleanup(vdev);
err_irq:
        vfio_platform_regions_cleanup(vdev);

-- 
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

[PATCH V6 8/8] vfio: platform: check reset call return code during release

[Sinan Kaya]

Release call is ignoring the return code from reset call and can
potentially continue even though reset call failed.

If reset_required module parameter is set, this patch is going
to validate the return code and will cause stack dump with
WARN_ON and warn the user of failure.

Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
---
 drivers/vfio/platform/vfio_platform_common.c | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
index 962cfb1..bb05ca0 100644
--- a/drivers/vfio/platform/vfio_platform_common.c
+++ b/drivers/vfio/platform/vfio_platform_common.c
@@ -243,7 +243,15 @@ static void vfio_platform_release(void *device_data)
 	mutex_lock(&driver_lock);
 
 	if (!(--vdev->refcnt)) {
-		vfio_platform_call_reset(vdev, NULL);
+		const char *extra_dbg = NULL;
+		int ret;
+
+		ret = vfio_platform_call_reset(vdev, &extra_dbg);
+		if (ret && vdev->reset_required) {
+			dev_warn(vdev->device, "reset driver is required and reset call failed in release (%d) %s\n",
+				 ret, extra_dbg ? extra_dbg : "");
+			WARN_ON(1);
+		}
 		vfio_platform_regions_cleanup(vdev);
 		vfio_platform_irq_cleanup(vdev);
 	}
-- 
1.8.2.1

[PATCH V6 8/8] vfio: platform: check reset call return code during release

[Auger Eric]

Hi Sinan,
Le 29/05/2016 ? 00:01, Sinan Kaya a ?crit :
> Release call is ignoring the return code from reset call and can
> potentially continue even though reset call failed.
> 
> If reset_required module parameter is set, this patch is going
> to validate the return code and will cause stack dump with
> WARN_ON and warn the user of failure.
> 
> Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
> ---
>  drivers/vfio/platform/vfio_platform_common.c | 10 +++++++++-
>  1 file changed, 9 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> index 962cfb1..bb05ca0 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -243,7 +243,15 @@ static void vfio_platform_release(void *device_data)
>  	mutex_lock(&driver_lock);
>  
>  	if (!(--vdev->refcnt)) {
> -		vfio_platform_call_reset(vdev, NULL);
> +		const char *extra_dbg = NULL;
> +		int ret;
> +
> +		ret = vfio_platform_call_reset(vdev, &extra_dbg);
> +		if (ret && vdev->reset_required) {
> +			dev_warn(vdev->device, "reset driver is required and reset call failed in release (%d) %s\n",
> +				 ret, extra_dbg ? extra_dbg : "");
> +			WARN_ON(1);
> +		}
>  		vfio_platform_regions_cleanup(vdev);
>  		vfio_platform_irq_cleanup(vdev);
>  	}
> 
Looks OK to me
Reviewed-by: Eric Auger <eric.auger@redhat.com>

Thanks

Eric

[PATCH V6 0/8] vfio, platform: add ACPI support

[Auger Eric]

Hi Sinan,
Le 29/05/2016 ? 00:01, Sinan Kaya a ?crit :
> The device tree code checks for the presence of a reset driver and calls
> the of_reset function pointer by looking up the reset driver as a module.
> 
> ACPI defines _RST method to perform device level reset. After the _RST
> method is executed, the OS can resume using the device.
> 
> This patch checks the presence of _RST method and calls the _RST
> method when reset is requested.
> 
> Changes from V5:
> 1. Handle reset function call failures in open and release (new patch).
> 2. Bring out extra debug information when failure happens (new patch).
> 3. Address review comments from Eric in ACPI _RST patch.

I think you need a respin to fix the deallocation issue in 7/8 + 1st patch missing.
Afterwards I don't have any other comments at that point. I will test the
dt non-regression tomorrow.

Thanks

Eric


> Sinan Kaya (8):
>   vfio: platform: move reset call to a common function
>   vfio: platform: determine reset capability
>   vfio: platform: add support for ACPI probe
>   vfio: platform: add extra debug info argument to call reset
>   vfio: platform: call _RST method when using ACPI
>   vfio, platform: make reset driver a requirement by default
>   vfio: platform: check reset call return code during open
>   vfio: platform: check reset call return code during release
> 
>  drivers/vfio/platform/vfio_amba.c             |   5 +
>  drivers/vfio/platform/vfio_platform.c         |   5 +
>  drivers/vfio/platform/vfio_platform_common.c  | 169 ++++++++++++++++++++++----
>  drivers/vfio/platform/vfio_platform_private.h |   2 +
>  4 files changed, 159 insertions(+), 22 deletions(-)
>