[PATCH v3 2/2] arm64: dts: Fix broken architected timer interrupt trigger

[ddaney.cavm@gmail.com (David Daney)]

I spoke too soon...

On 06/09/2016 11:11 AM, David Daney wrote:
> On 06/06/2016 10:56 AM, Marc Zyngier wrote:
>> The ARM architected timer specification mandates that the interrupt
>> associated with each timer is level triggered (which corresponds to
>> the "counter >= comparator" condition).
>>
>> A number of DTs are being remarkably creative, declaring the interrupt
>> to be edge triggered. A quick look at the TRM for the corresponding ARM
>> CPUs clearly shows that this is wrong, and I've corrected those.
>> For non-ARM designs (and in the absence of a publicly available TRM),
>> I've made them active low as well, which can't be completely wrong
>> as the GIC cannot disinguish between level low and level high.
>>
>> The respective maintainers are of course welcome to prove me wrong.
>>
>> While I was at it, I took the liberty to fix a couple of related issue,
>> such as some spurious affinity bits on ThunderX, and their complete
>> absence on ls1043a (both of which seem to be related to copy-pasting
>> from other DTs).
>>
>> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
>> ---
>>   arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi    | 8 ++++----
>>   arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi          | 8 ++++----
>>   arch/arm64/boot/dts/apm/apm-storm.dtsi               | 8 ++++----
>>   arch/arm64/boot/dts/broadcom/ns2.dtsi                | 8 ++++----
>>   arch/arm64/boot/dts/cavium/thunder-88xx.dtsi         | 8 ++++----
>>   arch/arm64/boot/dts/exynos/exynos7.dtsi              | 8 ++++----
>>   arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi       | 8 ++++----
>>   arch/arm64/boot/dts/marvell/armada-ap806.dtsi        | 8 ++++----
>>   arch/arm64/boot/dts/socionext/uniphier-ph1-ld20.dtsi | 8 ++++----
>>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi               | 8 ++++----
>>   10 files changed, 40 insertions(+), 40 deletions(-)
>>
> [...]
>> diff --git a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
>> b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
>> index 2eb9b22..382d86f 100644
>> --- a/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
>> +++ b/arch/arm64/boot/dts/cavium/thunder-88xx.dtsi
>> @@ -354,10 +354,10 @@
>>
>>       timer {
>>           compatible = "arm,armv8-timer";
>> -        interrupts = <1 13 0xff01>,
>> -                     <1 14 0xff01>,
>> -                     <1 11 0xff01>,
>> -                     <1 10 0xff01>;
>> +        interrupts = <1 13 8>,
>> +                     <1 14 8>,
>> +                     <1 11 8>,
>> +                     <1 10 8>;


NAK!

According to arm,gic-v3.txt the trigger value must be either 1 or 4:

   The 3rd cell is the flags, encoded as follows:
         bits[3:0] trigger type and level flags.
                 1 = edge triggered
                 4 = level triggered



>>       };
>>
>>       pmu {
>
> Acked-by: David Daney <david.daney@cavium.com>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel