[PATCH 09/12] mmc: sdhci-xenon: add initial Xenon eMMC driver

[adrian.hunter@intel.com (Adrian Hunter)]

On 14/06/16 11:19, Gregory CLEMENT wrote:
> Hi Adrian,
>  
>  On mar., juin 14 2016, Adrian Hunter <adrian.hunter@intel.com> wrote:
> 
>> On 09/06/16 10:10, Gregory CLEMENT wrote:
>>> From: Victor Gu <xigu@marvell.com>
>>>
>>> This path adds the driver for the Marvell Xenon eMMC host controller
>>> which supports eMMC 5.1, SD 3.0.
>>>
>>> However this driver supports only up to eMMC 5.0 since the command queue
>>> feature is not included (yet) in the driver.
>>>
>>> [gregory.clement at free-electrons.com:
>>>  - reformulate commit log
>>>  - overload the sdhci_set_uhs_signaling function instead of using a quirk
>>>  - fix a kconfig dependency
>>>  - remove dead code]
>>>
>>> Signed-off-by: Victor Gu <xigu@marvell.com>
>>> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
>>> ---
>>>  drivers/mmc/host/Kconfig       |   10 +
>>>  drivers/mmc/host/Makefile      |    1 +
>>>  drivers/mmc/host/sdhci-xenon.c | 1164 ++++++++++++++++++++++++++++++++++++++++
>>>  3 files changed, 1175 insertions(+)
>>>  create mode 100644 drivers/mmc/host/sdhci-xenon.c
>>>
>>
>> <SNIP>
>>
>>> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
>>> new file mode 100644
>>> index 000000000000..43c06db95872
>>> --- /dev/null
>>> +++ b/drivers/mmc/host/sdhci-xenon.c
>>
>> <SNIP>
>>
>>> +static int sdhci_xenon_delay_adj_test(struct sdhci_host *host,
>>> +		struct mmc_card *card, unsigned int delay,
>>> +		bool invert, bool phase)
>>> +{
>>> +	int ret;
>>> +	struct mmc_card *oldcard;
>>> +
>>> +	sdhci_xenon_set_fix_delay(host, delay, invert, phase);
>>> +
>>> +	/*
>>> +	 * If the card is not yet associated to the host, we
>>> +	 * temporally do it
>>> +	 */
>>> +	oldcard = card->host->card;
>>> +	if (!oldcard)
>>> +		card->host->card = card;
>>> +	ret =  card_alive(card);
>>
>> This looks like an abuse of bus_ops->alive().  You will need to get
>> agreement with Ulf how to handle this.  I will wait for Ulf's comments
>> before reviewing this patch set further.
> 
> Actually I modified this part of the driver to use
> bus_ops->alive(). Initially, the alive() code was more or less copied
> and paste from the mmc core with ugly include from mmc_ops.h and
> sdio_ops.h to make it work. I find it cleaner to directly access the
> alive() function.
> 
> Could you explain why it is an abuse of  bus_ops->alive()?

bus_ops->alive() is used to determine if the card is present and able to
respond.  You seem to be using it for a different purpose.  I will wait for
Ulf's comments.