linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: okaya@codeaurora.org (Sinan Kaya)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 7/9] vfio, platform: make reset driver a requirement by default
Date: Thu, 16 Jun 2016 13:08:35 -0400	[thread overview]
Message-ID: <5762DD13.8010501@codeaurora.org> (raw)
In-Reply-To: <8eaecc6e-aece-e859-281a-b02e2b6eced7@redhat.com>

On 6/16/2016 4:15 AM, Auger Eric wrote:

> Unfortunately this causes a crash when the reset module is not
> available. You should do the vfio_add_group_dev at the end. Something
> like below.
> 

Thanks for testing. I'll post v8 with this change. 


> Best Regards
> 
> Eric
> 
> ---
>  drivers/vfio/platform/vfio_platform_common.c | 26
> ++++++++++++--------------
>  1 file changed, 12 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/vfio/platform/vfio_platform_common.c
> b/drivers/vfio/platform/vfio_platform_common.c
> index d84c399..0928f7d 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -664,6 +664,14 @@ int vfio_platform_probe_common(struct
> vfio_platform_device *vdev,
>                 return ret;
> 
>         vdev->device = dev;
> +       mutex_init(&vdev->igate);
> +
> +       ret = vfio_platform_get_reset(vdev);
> +       if (ret && vdev->reset_required) {
> +               pr_err("vfio: no reset function found for device %s\n",
> +                      vdev->name);
> +               return ret;
> +       }
> 
>         group = iommu_group_get(dev);
>         if (!group) {
> @@ -672,22 +680,12 @@ int vfio_platform_probe_common(struct
> vfio_platform_device *vdev,
>         }
> 
>         ret = vfio_add_group_dev(dev, &vfio_platform_ops, vdev);
> -       if (ret)
> -               goto out;
> -
> -       ret = vfio_platform_get_reset(vdev);
> -       if (ret && vdev->reset_required) {
> -               pr_err("vfio: no reset function found for device %s\n",
> -                      vdev->name);
> -               goto out;
> -       }
> -
> -       mutex_init(&vdev->igate);
> +       if (ret) {
> +               iommu_group_put(group);
> +               return ret;
> +       }
> 
>         return 0;
> -out:
> -       iommu_group_put(group);
> -       return ret;
>  }
>  EXPORT_SYMBOL_GPL(vfio_platform_probe_common);
> 
> 
> 
>>  
>>  	mutex_init(&vdev->igate);
>>  
>>  	return 0;
>> +out:
>> +	iommu_group_put(group);
>> +	return ret;
>>  }
>>  EXPORT_SYMBOL_GPL(vfio_platform_probe_common);
>>  
>> diff --git a/drivers/vfio/platform/vfio_platform_private.h b/drivers/vfio/platform/vfio_platform_private.h
>> index ba9e4f8..68fbc00 100644
>> --- a/drivers/vfio/platform/vfio_platform_private.h
>> +++ b/drivers/vfio/platform/vfio_platform_private.h
>> @@ -50,6 +50,7 @@ struct vfio_platform_region {
>>  };
>>  
>>  struct vfio_platform_device {
>> +	bool				reset_required;
>>  	struct vfio_platform_region	*regions;
>>  	u32				num_regions;
>>  	struct vfio_platform_irq	*irqs;
>>


-- 
Sinan Kaya
Qualcomm Technologies, Inc. on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project

  reply	other threads:[~2016-06-16 17:08 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-13  4:26 [PATCH V7 0/9] vfio, platform: add ACPI support Sinan Kaya
2016-06-13  4:26 ` [PATCH V7 1/9] vfio: platform: rename reset function Sinan Kaya
2016-06-13  4:26 ` [PATCH V7 2/9] vfio: platform: move reset call to a common function Sinan Kaya
2016-06-13  4:26 ` [PATCH V7 3/9] vfio: platform: determine reset capability Sinan Kaya
2016-06-13  4:26 ` [PATCH V7 4/9] vfio: platform: add support for ACPI probe Sinan Kaya
2016-06-13  4:26 ` [PATCH V7 5/9] vfio: platform: add extra debug info argument to call reset Sinan Kaya
2016-06-13  4:26 ` [PATCH V7 6/9] vfio: platform: call _RST method when using ACPI Sinan Kaya
2016-06-23 18:59   ` Alex Williamson
2016-06-23 19:07     ` Alex Williamson
2016-06-23 19:14       ` Sinan Kaya
2016-07-13 19:39     ` Sinan Kaya
2016-07-13 20:11       ` Alex Williamson
2016-06-13  4:26 ` [PATCH V7 7/9] vfio, platform: make reset driver a requirement by default Sinan Kaya
2016-06-16  8:15   ` Auger Eric
2016-06-16 17:08     ` Sinan Kaya [this message]
2016-06-13  4:26 ` [PATCH V7 8/9] vfio: platform: check reset call return code during open Sinan Kaya
2016-06-15 20:08   ` Auger Eric
2016-06-13  4:26 ` [PATCH V7 9/9] vfio: platform: check reset call return code during release Sinan Kaya
2016-06-13 16:08 ` [PATCH V7 0/9] vfio, platform: add ACPI support Sinan Kaya
2016-06-14 15:29   ` Baptiste Reynal
2016-06-14 15:38     ` Sinan Kaya

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=5762DD13.8010501@codeaurora.org \
    --to=okaya@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).