linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: rnayak@codeaurora.org (Nayak, Rajendra)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 00/11] qcom: Add support for TSENS driver
Date: Fri, 17 Jun 2016 11:29:15 +0530	[thread overview]
Message-ID: <576391B3.7090508@codeaurora.org> (raw)
In-Reply-To: <575A57F8.6060004@codeaurora.org>

Hey Eduardo,

On 6/10/2016 11:32 AM, Rajendra Nayak wrote:
> Eduardo,
>
> On 05/05/2016 02:21 PM, Rajendra Nayak wrote:
>> Current set of patches apply on 4.6-rc6. Fixes for the nvmem apis
>> are now posted [1] and queued in -next [2]
>> Patches [1-6] will need to be merged via thermal tree/Eduardo.
>
> Any plans to pull these in for 4.8?

These patches have been on the list for quite a while, and they
do not have any outstanding dependencies or comments to be
addressed. I would really hope to see these in for 4.8.
Let me know if there is something you want me to address before
you pull them in.

regards,
Rajendra

>
> regards,
> Rajendra
>
>> Patches [7-11] will need to go via qcom-msm tree/Andy.
>>
>> Changes since v5:
>> * Minor review fixes from Eduardo
>>
>> Changes since v4:
>> * dropped qcom,tsens-slopes binding, used coefficients instead
>> * dropped qcom,sensor-id binding
>> * Added support for msm8996 family
>> * Other minor review fixes from v4
>>
>> Changes since v3:
>> * Dropped 'clk: qcom: create virtual child device for TSENS' which
>> is picked up by Stephen
>> * Updated GCC bindings with optional TSENS properties
>>
>> Changes since v2:
>> * Minor review fixes from Stephen/Punit and rebase on 4.3-rc4
>>
>> Changes since v1:
>> * Created virtual tsens device from gcc driver for 8960,
>> with DT having a single node for gcc and tsens
>> * Minor fixes with rebasing on 4.3-rc1
>>
>> Changes since RFC:
>> * Added support for 8916 and 8084
>> * Based off the latest nvmem framework patches [1]
>> * Minor review fixes for comments mostly from Lina
>>
>> This is an attempt to have a single TSENS driver for
>> the different versions of the TSENS IP that exist, on
>> different qcom msm/apq SoCs'
>> Support is added for msm8916, msm8960, msm8974 and msm8996 families.
>>
>> A lot of the work is based of original code from Stephen Boyd
>> and Siddartha Mohanadoss. I have also picked some of what
>> Narendran Rajan did in his attempt to upstream the support
>> for 8960 family. I could not keep the original authorship on
>> any of the patches because I ended up moving the code around
>> quite a bit in an effort to have a single driver for the
>> various devices. I would be glad to change the authorship
>> for any of the patches if needed.
>>
>> [1] https://lkml.org/lkml/2016/4/24/103
>> [2] git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git char-misc-next
>>
>> Rajendra Nayak (11):
>>    thermal: qcom: tsens: Add a skeletal TSENS drivers
>>    thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
>>    thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
>>    thermal: core: export apis to get slope and offset
>>    thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
>>    thermal: qcom: tsens-8996: Add support for 8996 family of SoCs
>>    arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes
>>    arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
>>    arm: dts: apq8084: Add thermal zones, tsens and qfprom nodes
>>    arm64: dts: msm8916: Add thermal zones, tsens and qfprom nodes
>>    arm64: dts: msm8996: Add thermal zones, tsens and qfprom nodes
>>
>>   .../devicetree/bindings/clock/qcom,gcc.txt         |  18 ++
>>   .../devicetree/bindings/thermal/qcom-tsens.txt     |  21 ++
>>   Documentation/thermal/sysfs-api.txt                |  12 +
>>   arch/arm/boot/dts/qcom-apq8064.dtsi                | 103 ++++++++
>>   arch/arm/boot/dts/qcom-apq8084.dtsi                | 103 ++++++++
>>   arch/arm/boot/dts/qcom-msm8974.dtsi                | 103 ++++++++
>>   arch/arm64/boot/dts/qcom/msm8916.dtsi              |  64 +++++
>>   arch/arm64/boot/dts/qcom/msm8996.dtsi              |  92 +++++++
>>   drivers/thermal/Kconfig                            |   5 +
>>   drivers/thermal/Makefile                           |   1 +
>>   drivers/thermal/qcom/Kconfig                       |  11 +
>>   drivers/thermal/qcom/Makefile                      |   2 +
>>   drivers/thermal/qcom/tsens-8916.c                  | 113 ++++++++
>>   drivers/thermal/qcom/tsens-8960.c                  | 292 +++++++++++++++++++++
>>   drivers/thermal/qcom/tsens-8974.c                  | 244 +++++++++++++++++
>>   drivers/thermal/qcom/tsens-8996.c                  |  84 ++++++
>>   drivers/thermal/qcom/tsens-common.c                | 141 ++++++++++
>>   drivers/thermal/qcom/tsens.c                       | 200 ++++++++++++++
>>   drivers/thermal/qcom/tsens.h                       |  92 +++++++
>>   drivers/thermal/thermal_core.c                     |  30 +++
>>   include/linux/thermal.h                            |   8 +
>>   21 files changed, 1739 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/thermal/qcom-tsens.txt
>>   create mode 100644 drivers/thermal/qcom/Kconfig
>>   create mode 100644 drivers/thermal/qcom/Makefile
>>   create mode 100644 drivers/thermal/qcom/tsens-8916.c
>>   create mode 100644 drivers/thermal/qcom/tsens-8960.c
>>   create mode 100644 drivers/thermal/qcom/tsens-8974.c
>>   create mode 100644 drivers/thermal/qcom/tsens-8996.c
>>   create mode 100644 drivers/thermal/qcom/tsens-common.c
>>   create mode 100644 drivers/thermal/qcom/tsens.c
>>   create mode 100644 drivers/thermal/qcom/tsens.h
>>
>

  reply	other threads:[~2016-06-17  5:59 UTC|newest]

Thread overview: 22+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-05-05  8:51 [PATCH v6 00/11] qcom: Add support for TSENS driver Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 01/11] thermal: qcom: tsens: Add a skeletal TSENS drivers Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 02/11] thermal: qcom: tsens-8916: Add support for 8916 family of SoCs Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 03/11] thermal: qcom: tsens-8974: Add support for 8974 " Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 04/11] thermal: core: export apis to get slope and offset Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 05/11] thermal: qcom: tsens-8960: Add support for 8960 family of SoCs Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 06/11] thermal: qcom: tsens-8996: Add support for 8996 " Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 07/11] arm: dts: msm8974: Add thermal zones, tsens and qfprom nodes Rajendra Nayak
2016-07-02  1:19   ` Eduardo Valentin
2016-05-05  8:51 ` [PATCH v6 08/11] arm: dts: apq8064: " Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 09/11] arm: dts: apq8084: " Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 10/11] arm64: dts: msm8916: " Rajendra Nayak
2016-05-05  8:51 ` [PATCH v6 11/11] arm64: dts: msm8996: " Rajendra Nayak
2016-06-10  6:02 ` [PATCH v6 00/11] qcom: Add support for TSENS driver Rajendra Nayak
2016-06-17  5:59   ` Nayak, Rajendra [this message]
2016-06-30  4:25     ` Rajendra Nayak
2016-07-01 20:52       ` Eduardo Valentin
2016-07-02  1:23         ` Eduardo Valentin
2016-07-04  8:04           ` Nayak, Rajendra
2016-07-28  8:33       ` Zhang Rui
2016-07-28  8:55         ` Zhang Rui
2016-08-09  3:51           ` Rajendra Nayak

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=576391B3.7090508@codeaurora.org \
    --to=rnayak@codeaurora.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).