* [PATCH] phy: phy-sun4i-usb: Add log when probing
@ 2016-06-13 11:43 Quentin Schulz
2016-06-17 13:23 ` Kishon Vijay Abraham I
0 siblings, 1 reply; 2+ messages in thread
From: Quentin Schulz @ 2016-06-13 11:43 UTC (permalink / raw)
To: linux-arm-kernel
When phy-sun4i-usb's probing fails, it does not print the reason in
kernel log, forcing the developer to edit this driver to add info logs.
This commit makes the kernel print the reason of phy-sun4i-usb's probing
failure or a success message.
Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
---
drivers/phy/phy-sun4i-usb.c | 28 ++++++++++++++++++++++------
1 file changed, 22 insertions(+), 6 deletions(-)
diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
index 45f01d6..117afa0 100644
--- a/drivers/phy/phy-sun4i-usb.c
+++ b/drivers/phy/phy-sun4i-usb.c
@@ -552,24 +552,32 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
data->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(data->base))
+ if (IS_ERR(data->base)) {
+ dev_err(dev, "Couldn't map our registers\n");
return PTR_ERR(data->base);
+ }
data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det",
GPIOD_IN);
- if (IS_ERR(data->id_det_gpio))
+ if (IS_ERR(data->id_det_gpio)) {
+ dev_err(dev, "Couldn't request ID GPIO\n");
return PTR_ERR(data->id_det_gpio);
+ }
data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det",
GPIOD_IN);
- if (IS_ERR(data->vbus_det_gpio))
+ if (IS_ERR(data->vbus_det_gpio)) {
+ dev_err(dev, "Couldn't request VBUS detect GPIO\n");
return PTR_ERR(data->vbus_det_gpio);
+ }
if (of_find_property(np, "usb0_vbus_power-supply", NULL)) {
data->vbus_power_supply = devm_power_supply_get_by_phandle(dev,
"usb0_vbus_power-supply");
- if (IS_ERR(data->vbus_power_supply))
+ if (IS_ERR(data->vbus_power_supply)) {
+ dev_err(dev, "Couldn't get the VBUS power supply\n");
return PTR_ERR(data->vbus_power_supply);
+ }
if (!data->vbus_power_supply)
return -EPROBE_DEFER;
@@ -584,8 +592,10 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
if (data->id_det_gpio) {
data->extcon = devm_extcon_dev_allocate(dev,
sun4i_usb_phy0_cable);
- if (IS_ERR(data->extcon))
+ if (IS_ERR(data->extcon)) {
+ dev_err(dev, "Couldn't allocate our extcon device\n");
return PTR_ERR(data->extcon);
+ }
ret = devm_extcon_dev_register(dev, data->extcon);
if (ret) {
@@ -601,8 +611,12 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
snprintf(name, sizeof(name), "usb%d_vbus", i);
phy->vbus = devm_regulator_get_optional(dev, name);
if (IS_ERR(phy->vbus)) {
- if (PTR_ERR(phy->vbus) == -EPROBE_DEFER)
+ if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) {
+ dev_err(dev, "Couldn't get regulator %s... Deferring probe\n",
+ name);
return -EPROBE_DEFER;
+ }
+
phy->vbus = NULL;
}
@@ -690,6 +704,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
return PTR_ERR(phy_provider);
}
+ dev_info(dev, "successfully loaded\n");
+
return 0;
}
--
2.5.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* [PATCH] phy: phy-sun4i-usb: Add log when probing
2016-06-13 11:43 [PATCH] phy: phy-sun4i-usb: Add log when probing Quentin Schulz
@ 2016-06-17 13:23 ` Kishon Vijay Abraham I
0 siblings, 0 replies; 2+ messages in thread
From: Kishon Vijay Abraham I @ 2016-06-17 13:23 UTC (permalink / raw)
To: linux-arm-kernel
Hi Quentin,
On Monday 13 June 2016 05:13 PM, Quentin Schulz wrote:
> When phy-sun4i-usb's probing fails, it does not print the reason in
> kernel log, forcing the developer to edit this driver to add info logs.
> This commit makes the kernel print the reason of phy-sun4i-usb's probing
> failure or a success message.
>
> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com>
> ---
> drivers/phy/phy-sun4i-usb.c | 28 ++++++++++++++++++++++------
> 1 file changed, 22 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c
> index 45f01d6..117afa0 100644
> --- a/drivers/phy/phy-sun4i-usb.c
> +++ b/drivers/phy/phy-sun4i-usb.c
> @@ -552,24 +552,32 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
>
> res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl");
> data->base = devm_ioremap_resource(dev, res);
> - if (IS_ERR(data->base))
> + if (IS_ERR(data->base)) {
> + dev_err(dev, "Couldn't map our registers\n");
devm_ioremap_resource() itself has error message. So this shouldn't be required.
> return PTR_ERR(data->base);
> + }
>
> data->id_det_gpio = devm_gpiod_get_optional(dev, "usb0_id_det",
> GPIOD_IN);
> - if (IS_ERR(data->id_det_gpio))
> + if (IS_ERR(data->id_det_gpio)) {
> + dev_err(dev, "Couldn't request ID GPIO\n");
> return PTR_ERR(data->id_det_gpio);
> + }
>
> data->vbus_det_gpio = devm_gpiod_get_optional(dev, "usb0_vbus_det",
> GPIOD_IN);
> - if (IS_ERR(data->vbus_det_gpio))
> + if (IS_ERR(data->vbus_det_gpio)) {
> + dev_err(dev, "Couldn't request VBUS detect GPIO\n");
> return PTR_ERR(data->vbus_det_gpio);
> + }
>
> if (of_find_property(np, "usb0_vbus_power-supply", NULL)) {
> data->vbus_power_supply = devm_power_supply_get_by_phandle(dev,
> "usb0_vbus_power-supply");
> - if (IS_ERR(data->vbus_power_supply))
> + if (IS_ERR(data->vbus_power_supply)) {
> + dev_err(dev, "Couldn't get the VBUS power supply\n");
> return PTR_ERR(data->vbus_power_supply);
> + }
>
> if (!data->vbus_power_supply)
> return -EPROBE_DEFER;
> @@ -584,8 +592,10 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
> if (data->id_det_gpio) {
> data->extcon = devm_extcon_dev_allocate(dev,
> sun4i_usb_phy0_cable);
> - if (IS_ERR(data->extcon))
> + if (IS_ERR(data->extcon)) {
> + dev_err(dev, "Couldn't allocate our extcon device\n");
> return PTR_ERR(data->extcon);
> + }
>
> ret = devm_extcon_dev_register(dev, data->extcon);
> if (ret) {
> @@ -601,8 +611,12 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
> snprintf(name, sizeof(name), "usb%d_vbus", i);
> phy->vbus = devm_regulator_get_optional(dev, name);
> if (IS_ERR(phy->vbus)) {
> - if (PTR_ERR(phy->vbus) == -EPROBE_DEFER)
> + if (PTR_ERR(phy->vbus) == -EPROBE_DEFER) {
> + dev_err(dev, "Couldn't get regulator %s... Deferring probe\n",
> + name);
> return -EPROBE_DEFER;
> + }
> +
> phy->vbus = NULL;
For rest of the API's it's fine.
> }
>
> @@ -690,6 +704,8 @@ static int sun4i_usb_phy_probe(struct platform_device *pdev)
> return PTR_ERR(phy_provider);
> }
>
> + dev_info(dev, "successfully loaded\n");
This will make the boot noisy. Maybe dev_dbg instead?
Thanks
Kishon
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2016-06-17 13:23 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-13 11:43 [PATCH] phy: phy-sun4i-usb: Add log when probing Quentin Schulz
2016-06-17 13:23 ` Kishon Vijay Abraham I
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).