linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: sudeep.holla@arm.com (Sudeep Holla)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/3] arm64: dts: juno: add coresight support
Date: Fri, 17 Jun 2016 16:33:53 +0100	[thread overview]
Message-ID: <57641861.7040408@arm.com> (raw)
In-Reply-To: <CANLsYkyWhknAb9QeGGjM2Et0+VUVjz7W2xyUJGstxfNc2bC20Q@mail.gmail.com>



On 17/06/16 16:29, Mathieu Poirier wrote:
> On 6 June 2016 at 09:59, Sudeep Holla <sudeep.holla@arm.com> wrote:
>> Most of the debug-related components on Juno are located in the coreSight
>> subsystem while others are located in the Cortex-Axx clusters, the SCP
>> subsystem, and in the main system.
>>
>> Each core in the two processor clusters contain an Embedded Trace
>> Macrocell(ETM) which generates real-time trace information that trace
>> tools can use and an ATB trace output that is sent to a funnel before
>> going to the CoreSight subsystem.
>>
>> The trace output signals combine with two trace expansions using another
>> funnel and fed into the Embedded Trace FIFO(ETF0).
>>
>> The output trace data stream of the funnel is then replicated before it
>> is sent to either the:
>> - Trace Port Interface Unit(TPIU), that sends it out using the trace port.
>> - ETR that can write the trace data to memory located in the application
>>    memory space
>>
>> Cc: Liviu Dudau <liviu.dudau@arm.com>
>> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
>> Cc: linux-arm-kernel at lists.infradead.org
>> Cc: devicetree at vger.kernel.org
>> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
>> ---
>>   arch/arm64/boot/dts/arm/juno-base.dtsi | 296 +++++++++++++++++++++++++++++++++
>>   arch/arm64/boot/dts/arm/juno-r1.dts    |  24 +++
>>   arch/arm64/boot/dts/arm/juno-r2.dts    |  24 +++
>>   arch/arm64/boot/dts/arm/juno.dts       |  24 +++
>>   4 files changed, 368 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/arm/juno-base.dtsi b/arch/arm64/boot/dts/arm/juno-base.dtsi
>> index dee2386d3b9b..90a8710f7032 100644
>> --- a/arch/arm64/boot/dts/arm/juno-base.dtsi
>> +++ b/arch/arm64/boot/dts/arm/juno-base.dtsi

[...]

>> +
>> +       coresight-replicator {
>> +               /* non-configurable replicators don't show up on the
>> +                * AMBA bus.  As such no need to add "arm,primecell".
>> +                */
>
> Please use kernel documentation style.
>

Ah, that's copy paste from arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts ;)


[...]

>>
>
> With the above change:
>
> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
>

Thanks.

-- 
Regards,
Sudeep

  reply	other threads:[~2016-06-17 15:33 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-06 15:59 [PATCH 0/3] arm64: dts: juno: add coresight support Sudeep Holla
2016-06-06 15:59 ` [PATCH 1/3] " Sudeep Holla
2016-06-08 16:04   ` Liviu Dudau
2016-06-12 21:57   ` Mathieu Poirier
2016-06-13  3:05     ` Mathieu Poirier
2016-06-13  9:18     ` Sudeep Holla
2016-06-13 14:47       ` Mathieu Poirier
2016-06-13 14:53         ` Sudeep Holla
2016-06-17 15:29   ` Mathieu Poirier
2016-06-17 15:33     ` Sudeep Holla [this message]
2016-06-21  5:41   ` Olof Johansson
2016-06-21  8:44     ` Suzuki K Poulose
2016-06-21 11:27     ` Sudeep Holla
2016-06-21 16:30       ` Mathieu Poirier
2016-06-28 17:03       ` Sudeep Holla
2016-06-06 15:59 ` [PATCH 2/3] arm64: dts: juno: add arm,primecell-periphid override Sudeep Holla
2016-06-08 16:05   ` [PATCH 2/3] arm64: dts: juno: add arm, primecell-periphid override Liviu Dudau
2016-06-16 14:42   ` Sudeep Holla
2016-06-06 15:59 ` [PATCH 3/3] arm64: dts: juno: add SCPI power domains for device power management Sudeep Holla
2016-06-08 16:05   ` Liviu Dudau
2016-06-17 15:30   ` Mathieu Poirier
2016-07-06 10:15 ` [PATCH v2 0/2] arm64: dts: juno: add coresight support Sudeep Holla
2016-07-06 10:15   ` [PATCH v2 1/2] " Sudeep Holla
2016-07-06 10:15   ` [PATCH v2 2/2] arm64: dts: juno: add SCPI power domains for device power management Sudeep Holla

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57641861.7040408@arm.com \
    --to=sudeep.holla@arm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).