* [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board
@ 2016-06-23 0:00 Florian Fainelli
2016-06-28 18:18 ` Jon Mason
0 siblings, 1 reply; 3+ messages in thread
From: Florian Fainelli @ 2016-06-23 0:00 UTC (permalink / raw)
To: linux-arm-kernel
Add support for the Broadcom BCM953012 Enterprise Router reference
board, enable the following peripherals:
- UART0 (UART1 is not populated)
- WPS and restart GPIO buttons
- Ethernet switch w/ only two facing ports
- NAND flash
- SPI-NOR flash
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/bcm953012er.dts | 104 ++++++++++++++++++++++++++++++++++++++
2 files changed, 105 insertions(+)
create mode 100644 arch/arm/boot/dts/bcm953012er.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 06b6c2d695bf..cbd13ea4b71e 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm47094-dlink-dir-885l.dtb \
bcm94708.dtb \
bcm94709.dtb \
+ bcm953012er.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
new file mode 100644
index 000000000000..0a9abecf9423
--- /dev/null
+++ b/arch/arm/boot/dts/bcm953012er.dts
@@ -0,0 +1,104 @@
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2016 Broadcom. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+
+/ {
+ model = "NorthStar Enterprise Router (BCM953012ER)";
+ compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory {
+ reg = <0x00000000 0x8000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&spi_nor {
+ status = "okay";
+};
+
+&srab {
+ status = "okay";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+ label = "port0";
+ };
+
+ port at 1 {
+ reg = <1>;
+ label = "port1";
+ };
+
+ port at 5 {
+ reg = <5>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ };
+ };
+};
--
2.7.4
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board
2016-06-23 0:00 [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board Florian Fainelli
@ 2016-06-28 18:18 ` Jon Mason
2016-06-29 1:06 ` Florian Fainelli
0 siblings, 1 reply; 3+ messages in thread
From: Jon Mason @ 2016-06-28 18:18 UTC (permalink / raw)
To: linux-arm-kernel
On Wed, Jun 22, 2016 at 8:00 PM, Florian Fainelli <f.fainelli@gmail.com> wrote:
> Add support for the Broadcom BCM953012 Enterprise Router reference
> board, enable the following peripherals:
>
> - UART0 (UART1 is not populated)
> - WPS and restart GPIO buttons
> - Ethernet switch w/ only two facing ports
> - NAND flash
> - SPI-NOR flash
>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Jon Mason <jon.mason@broadcom.com>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/bcm953012er.dts | 104 ++++++++++++++++++++++++++++++++++++++
> 2 files changed, 105 insertions(+)
> create mode 100644 arch/arm/boot/dts/bcm953012er.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 06b6c2d695bf..cbd13ea4b71e 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -85,6 +85,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
> bcm47094-dlink-dir-885l.dtb \
> bcm94708.dtb \
> bcm94709.dtb \
> + bcm953012er.dtb \
> bcm953012k.dtb
> dtb-$(CONFIG_ARCH_BCM_63XX) += \
> bcm963138dvt.dtb
> diff --git a/arch/arm/boot/dts/bcm953012er.dts b/arch/arm/boot/dts/bcm953012er.dts
> new file mode 100644
> index 000000000000..0a9abecf9423
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm953012er.dts
> @@ -0,0 +1,104 @@
> +/*
> + * BSD LICENSE
> + *
> + * Copyright(c) 2016 Broadcom. All rights reserved.
> + *
> + * Redistribution and use in source and binary forms, with or without
> + * modification, are permitted provided that the following conditions
> + * are met:
> + *
> + * * Redistributions of source code must retain the above copyright
> + * notice, this list of conditions and the following disclaimer.
> + * * Redistributions in binary form must reproduce the above copyright
> + * notice, this list of conditions and the following disclaimer in
> + * the documentation and/or other materials provided with the
> + * distribution.
> + * * Neither the name of Broadcom Corporation nor the names of its
> + * contributors may be used to endorse or promote products derived
> + * from this software without specific prior written permission.
> + *
> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
> + */
> +
> +/dts-v1/;
> +
> +#include "bcm4708.dtsi"
> +#include "bcm5301x-nand-cs0-bch8.dtsi"
> +
> +/ {
> + model = "NorthStar Enterprise Router (BCM953012ER)";
> + compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:115200n8";
> + };
> +
> + memory {
> + reg = <0x00000000 0x8000000>;
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + wps {
> + label = "WPS";
> + linux,code = <KEY_WPS_BUTTON>;
> + gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
> + };
> +
> + restart {
> + label = "Reset";
> + linux,code = <KEY_RESTART>;
> + gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
> + };
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&spi_nor {
> + status = "okay";
> +};
> +
> +&srab {
> + status = "okay";
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + label = "port0";
> + };
> +
> + port at 1 {
> + reg = <1>;
> + label = "port1";
> + };
> +
> + port at 5 {
> + reg = <5>;
> + label = "cpu";
> + ethernet = <&gmac0>;
> + };
> + };
> +};
> --
> 2.7.4
>
^ permalink raw reply [flat|nested] 3+ messages in thread* [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board
2016-06-28 18:18 ` Jon Mason
@ 2016-06-29 1:06 ` Florian Fainelli
0 siblings, 0 replies; 3+ messages in thread
From: Florian Fainelli @ 2016-06-29 1:06 UTC (permalink / raw)
To: linux-arm-kernel
On 06/28/2016 11:18 AM, Jon Mason wrote:
> On Wed, Jun 22, 2016 at 8:00 PM, Florian Fainelli <f.fainelli@gmail.com> wrote:
>> Add support for the Broadcom BCM953012 Enterprise Router reference
>> board, enable the following peripherals:
>>
>> - UART0 (UART1 is not populated)
>> - WPS and restart GPIO buttons
>> - Ethernet switch w/ only two facing ports
>> - NAND flash
>> - SPI-NOR flash
>>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> Acked-by: Jon Mason <jon.mason@broadcom.com>
Applied, thanks!
--
Florian
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2016-06-29 1:06 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-23 0:00 [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board Florian Fainelli
2016-06-28 18:18 ` Jon Mason
2016-06-29 1:06 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).