From mboxrd@z Thu Jan 1 00:00:00 1970 From: gabriel.fernandez@st.com (Gabriel Fernandez) Date: Wed, 6 Jul 2016 09:39:10 +0200 Subject: [PATCH 2/4] dt-bindings: Document the STM32 reset bindings In-Reply-To: <20160705161813.GA20477@rob-hp-laptop> References: <1467640052-6770-1-git-send-email-gabriel.fernandez@st.com> <1467640052-6770-2-git-send-email-gabriel.fernandez@st.com> <20160705161813.GA20477@rob-hp-laptop> Message-ID: <577CB59E.1080508@st.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Rob, Thanks for reviewing On 07/05/2016 06:18 PM, Rob Herring wrote: > On Mon, Jul 04, 2016 at 03:47:30PM +0200, gabriel.fernandez at st.com wrote: >> From: Maxime Coquelin >> >> This adds documentation of device tree bindings for the >> STM32 reset controller. >> >> Signed-off-by: Maxime Coquelin >> --- >> .../devicetree/bindings/reset/st,stm32-rcc.txt | 50 ++++++++++++++++++++++ >> 1 file changed, 50 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/reset/st,stm32-rcc.txt >> >> diff --git a/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt >> new file mode 100644 >> index 0000000..333080c >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/reset/st,stm32-rcc.txt >> @@ -0,0 +1,50 @@ >> +STMicroelectronics STM32 Peripheral Reset Controller >> +==================================================== >> + >> +The RCC IP is both a reset and a clock controller. This documentation only >> +documents the reset part. > The clock part is already documented or will do later? Either way, you > are describing an IP block, so please describe all of it now and in one > place. > > Rob The clock part is already documented. Okay to put this in one place, but in which directory ? what do you prefer ? - create a rcc directory - put the file on top, in Documentation/devicetree/bindings Best regards Gabriel