* [PATCH] arm64: Add Broadcom Set Top Box Kconfig entry point
@ 2016-06-29 19:49 Markus Mayer
2016-07-11 23:50 ` Florian Fainelli
2016-07-12 9:06 ` Sudeep Holla
0 siblings, 2 replies; 4+ messages in thread
From: Markus Mayer @ 2016-06-29 19:49 UTC (permalink / raw)
To: linux-arm-kernel
From: Florian Fainelli <f.fainelli@gmail.com>
Add an ARCH_BRCMSTB Kconfig symbol which allows us not to update the
dependencies for all STB-related drivers. Select BRCMSTB_L2_IRQ and
GENERIC_IRQ_CHIP which are required for proper functioning.
Signed-off-by: Doug Berger <opendmb@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
---
arch/arm64/Kconfig.platforms | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index 7ef1d05..22b5c7f 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -29,6 +29,13 @@ config ARCH_BERLIN
help
This enables support for Marvell Berlin SoC Family
+config ARCH_BRCMSTB
+ bool "Broadcom Set-Top-Box SoCs"
+ select BRCMSTB_L2_IRQ
+ select GENERIC_IRQ_CHIP
+ help
+ This enables support for Broadcom's ARMv8 Set Top Box SoCs
+
config ARCH_EXYNOS
bool "ARMv8 based Samsung Exynos SoC family"
select COMMON_CLK_SAMSUNG
--
2.7.4
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH] arm64: Add Broadcom Set Top Box Kconfig entry point
2016-06-29 19:49 [PATCH] arm64: Add Broadcom Set Top Box Kconfig entry point Markus Mayer
@ 2016-07-11 23:50 ` Florian Fainelli
2016-07-12 9:06 ` Sudeep Holla
1 sibling, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2016-07-11 23:50 UTC (permalink / raw)
To: linux-arm-kernel
On 06/29/2016 12:49 PM, Markus Mayer wrote:
> From: Florian Fainelli <f.fainelli@gmail.com>
>
> Add an ARCH_BRCMSTB Kconfig symbol which allows us not to update the
> dependencies for all STB-related drivers. Select BRCMSTB_L2_IRQ and
> GENERIC_IRQ_CHIP which are required for proper functioning.
>
> Signed-off-by: Doug Berger <opendmb@gmail.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Applied to soc-arm64/next thanks Markus!
--
Florian
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] arm64: Add Broadcom Set Top Box Kconfig entry point
2016-06-29 19:49 [PATCH] arm64: Add Broadcom Set Top Box Kconfig entry point Markus Mayer
2016-07-11 23:50 ` Florian Fainelli
@ 2016-07-12 9:06 ` Sudeep Holla
2016-07-13 21:24 ` Florian Fainelli
1 sibling, 1 reply; 4+ messages in thread
From: Sudeep Holla @ 2016-07-12 9:06 UTC (permalink / raw)
To: linux-arm-kernel
On 29/06/16 20:49, Markus Mayer wrote:
> From: Florian Fainelli <f.fainelli@gmail.com>
>
> Add an ARCH_BRCMSTB Kconfig symbol which allows us not to update the
> dependencies for all STB-related drivers. Select BRCMSTB_L2_IRQ and
> GENERIC_IRQ_CHIP which are required for proper functioning.
>
> Signed-off-by: Doug Berger <opendmb@gmail.com>
> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
> ---
>
> arch/arm64/Kconfig.platforms | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
> index 7ef1d05..22b5c7f 100644
> --- a/arch/arm64/Kconfig.platforms
> +++ b/arch/arm64/Kconfig.platforms
> @@ -29,6 +29,13 @@ config ARCH_BERLIN
> help
> This enables support for Marvell Berlin SoC Family
>
> +config ARCH_BRCMSTB
> + bool "Broadcom Set-Top-Box SoCs"
> + select BRCMSTB_L2_IRQ
I see that BRCMSTB_L2_IRQ selects GENERIC_IRQ_CHIP already so the below
one is redundant, generally irqchip code should select GENERIC_IRQ_CHIP
> + select GENERIC_IRQ_CHIP
> + help
> + This enables support for Broadcom's ARMv8 Set Top Box SoCs
> +
> config ARCH_EXYNOS
> bool "ARMv8 based Samsung Exynos SoC family"
> select COMMON_CLK_SAMSUNG
>
--
Regards,
Sudeep
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] arm64: Add Broadcom Set Top Box Kconfig entry point
2016-07-12 9:06 ` Sudeep Holla
@ 2016-07-13 21:24 ` Florian Fainelli
0 siblings, 0 replies; 4+ messages in thread
From: Florian Fainelli @ 2016-07-13 21:24 UTC (permalink / raw)
To: linux-arm-kernel
On 07/12/2016 02:06 AM, Sudeep Holla wrote:
>
>
> On 29/06/16 20:49, Markus Mayer wrote:
>> From: Florian Fainelli <f.fainelli@gmail.com>
>>
>> Add an ARCH_BRCMSTB Kconfig symbol which allows us not to update the
>> dependencies for all STB-related drivers. Select BRCMSTB_L2_IRQ and
>> GENERIC_IRQ_CHIP which are required for proper functioning.
>>
>> Signed-off-by: Doug Berger <opendmb@gmail.com>
>> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
>> Signed-off-by: Markus Mayer <mmayer@broadcom.com>
>> ---
>>
>> arch/arm64/Kconfig.platforms | 7 +++++++
>> 1 file changed, 7 insertions(+)
>>
>> diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
>> index 7ef1d05..22b5c7f 100644
>> --- a/arch/arm64/Kconfig.platforms
>> +++ b/arch/arm64/Kconfig.platforms
>> @@ -29,6 +29,13 @@ config ARCH_BERLIN
>> help
>> This enables support for Marvell Berlin SoC Family
>>
>> +config ARCH_BRCMSTB
>> + bool "Broadcom Set-Top-Box SoCs"
>> + select BRCMSTB_L2_IRQ
>
> I see that BRCMSTB_L2_IRQ selects GENERIC_IRQ_CHIP already so the below
> one is redundant, generally irqchip code should select GENERIC_IRQ_CHIP
Thanks, I applied a fix in place which removes the select
GENERIC_IRQ_CHIP since it is redundant.
--
Florian
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2016-07-13 21:24 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-06-29 19:49 [PATCH] arm64: Add Broadcom Set Top Box Kconfig entry point Markus Mayer
2016-07-11 23:50 ` Florian Fainelli
2016-07-12 9:06 ` Sudeep Holla
2016-07-13 21:24 ` Florian Fainelli
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).