public inbox for linux-arm-kernel@lists.infradead.org
 help / color / mirror / Atom feed
From: grygorii.strashko@ti.com (Grygorii Strashko)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: keystone: specify usb mode explicitly
Date: Mon, 18 Jul 2016 20:45:23 +0300	[thread overview]
Message-ID: <578D15B3.1040705@ti.com> (raw)
In-Reply-To: <20160628094245.9521-1-grygorii.strashko@ti.com>

Hi Santosh,
On 06/28/2016 12:42 PM, Grygorii Strashko wrote:
> The USB OTG mode is not supported by Kestone 2 devices, as result, the
> USB devices enumeration and detection will not work properly when
> kernel is built with CONFIG_USB_DWC3_DUAL_ROLE=y (default for multi
> platform build):
>   - it's required to load gadget drivers manually to make host mode
> work and this confuses current Keystone 2 users
>   - device mode is not working, because port can't detect and switch to
> peripheral/host mode dynamically.
>
> Hence, specify usb mode explicitly in DT: usb0 = "host" for all KS2
> devices and usb1 = "peripheral" for K2E.
>
> Cc: Sekhar Nori <nsekhar@ti.com>
> Cc: Roger Quadros <rogerq@ti.com>
> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>

Do you expect any additional actions from my side relate to this patch?

> ---
>   arch/arm/boot/dts/keystone-k2e-evm.dts  | 12 ++++++++++--
>   arch/arm/boot/dts/keystone-k2e.dtsi     |  4 ++--
>   arch/arm/boot/dts/keystone-k2hk-evm.dts |  6 +++++-
>   arch/arm/boot/dts/keystone-k2l-evm.dts  |  6 +++++-
>   arch/arm/boot/dts/keystone.dtsi         |  4 ++--
>   5 files changed, 24 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm/boot/dts/keystone-k2e-evm.dts b/arch/arm/boot/dts/keystone-k2e-evm.dts
> index 4c32ebc..ae1ebe7 100644
> --- a/arch/arm/boot/dts/keystone-k2e-evm.dts
> +++ b/arch/arm/boot/dts/keystone-k2e-evm.dts
> @@ -47,18 +47,26 @@
>   	status = "okay";
>   };
>
> -&usb {
> +&keystone_usb0 {
>   	status = "okay";
>   };
>
> +&usb0 {
> +	dr_mode = "host";
> +};
> +
>   &usb1_phy {
>   	status = "okay";
>   };
>
> -&usb1 {
> +&keystone_usb1 {
>   	status = "okay";
>   };
>
> +&usb1 {
> +	dr_mode = "peripheral";
> +};
> +
>   &i2c0 {
>   	dtt at 50 {
>   		compatible = "at,24c1024";
> diff --git a/arch/arm/boot/dts/keystone-k2e.dtsi b/arch/arm/boot/dts/keystone-k2e.dtsi
> index 96b349f..3540a1d 100644
> --- a/arch/arm/boot/dts/keystone-k2e.dtsi
> +++ b/arch/arm/boot/dts/keystone-k2e.dtsi
> @@ -61,7 +61,7 @@
>   			status = "disabled";
>   		};
>
> -		usb1: usb at 25000000 {
> +		keystone_usb1: usb at 25000000 {
>   			compatible = "ti,keystone-dwc3";
>   			#address-cells = <1>;
>   			#size-cells = <1>;
> @@ -74,7 +74,7 @@
>   			dma-ranges;
>   			status = "disabled";
>
> -			dwc3 at 25010000 {
> +			usb1: dwc3 at 25010000 {
>   				compatible = "synopsys,dwc3";
>   				reg = <0x25010000 0x70000>;
>   				interrupts = <GIC_SPI 414 IRQ_TYPE_EDGE_RISING>;
> diff --git a/arch/arm/boot/dts/keystone-k2hk-evm.dts b/arch/arm/boot/dts/keystone-k2hk-evm.dts
> index b38b344..2156ff9 100644
> --- a/arch/arm/boot/dts/keystone-k2hk-evm.dts
> +++ b/arch/arm/boot/dts/keystone-k2hk-evm.dts
> @@ -83,10 +83,14 @@
>   	status = "okay";
>   };
>
> -&usb {
> +&keystone_usb0 {
>   	status = "okay";
>   };
>
> +&usb0 {
> +	dr_mode = "host";
> +};
> +
>   &aemif {
>   	cs0 {
>   		#address-cells = <2>;
> diff --git a/arch/arm/boot/dts/keystone-k2l-evm.dts b/arch/arm/boot/dts/keystone-k2l-evm.dts
> index 7f9c2e9..056b42f 100644
> --- a/arch/arm/boot/dts/keystone-k2l-evm.dts
> +++ b/arch/arm/boot/dts/keystone-k2l-evm.dts
> @@ -32,10 +32,14 @@
>   	status = "okay";
>   };
>
> -&usb {
> +&keystone_usb0 {
>   	status = "okay";
>   };
>
> +&usb0 {
> +	dr_mode = "host";
> +};
> +
>   &i2c0 {
>   	dtt at 50 {
>   		compatible = "at,24c1024";
> diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi
> index e34b226..96c9943 100644
> --- a/arch/arm/boot/dts/keystone.dtsi
> +++ b/arch/arm/boot/dts/keystone.dtsi
> @@ -188,7 +188,7 @@
>   			status = "disabled";
>   		};
>
> -		usb: usb at 2680000 {
> +		keystone_usb0: usb at 2680000 {
>   			compatible = "ti,keystone-dwc3";
>   			#address-cells = <1>;
>   			#size-cells = <1>;
> @@ -201,7 +201,7 @@
>   			dma-ranges;
>   			status = "disabled";
>
> -			dwc3 at 2690000 {
> +			usb0: dwc3 at 2690000 {
>   				compatible = "synopsys,dwc3";
>   				reg = <0x2690000 0x70000>;
>   				interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>;
>


-- 
regards,
-grygorii

  reply	other threads:[~2016-07-18 17:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-06-28  9:42 [PATCH] ARM: dts: keystone: specify usb mode explicitly Grygorii Strashko
2016-07-18 17:45 ` Grygorii Strashko [this message]
2016-07-18 17:49   ` Santosh Shilimkar
2016-08-25 14:11     ` Grygorii Strashko
2016-08-25 16:31       ` Santosh Shilimkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=578D15B3.1040705@ti.com \
    --to=grygorii.strashko@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox