[PATCH V2 01/15] mmc: sdhci: using common mmc_regulator_set_vqmmc()

[adrian.hunter@intel.com (Adrian Hunter)]

On 12/07/16 10:46, Dong Aisheng wrote:
> Switch to use the more robust common mmc_regulator_set_vqmmc()
> function in MMC core which set the target voltage as close as
> possible to target voltage.
> 
> We did not re-factor the whole sdhci_start_signal_voltage_switch()
> cause we want to keep the original signal switch order between host
> and card to avoid potential break.
> 
> Signed-off-by: Dong Aisheng <aisheng.dong@nxp.com>


Acked-by: Adrian Hunter <adrian.hunter@intel.com>


> ---
>  drivers/mmc/host/sdhci.c | 9 +++------
>  1 file changed, 3 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 2ee8bfa77116..7894652b9929 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1835,8 +1835,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
>  		sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2);
>  
>  		if (!IS_ERR(mmc->supply.vqmmc)) {
> -			ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000,
> -						    3600000);
> +			ret = mmc_regulator_set_vqmmc(mmc, ios);
>  			if (ret) {
>  				pr_warn("%s: Switching to 3.3V signalling voltage failed\n",
>  					mmc_hostname(mmc));
> @@ -1859,8 +1858,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
>  		if (!(host->flags & SDHCI_SIGNALING_180))
>  			return -EINVAL;
>  		if (!IS_ERR(mmc->supply.vqmmc)) {
> -			ret = regulator_set_voltage(mmc->supply.vqmmc,
> -					1700000, 1950000);
> +			ret = mmc_regulator_set_vqmmc(mmc, ios);
>  			if (ret) {
>  				pr_warn("%s: Switching to 1.8V signalling voltage failed\n",
>  					mmc_hostname(mmc));
> @@ -1892,8 +1890,7 @@ static int sdhci_start_signal_voltage_switch(struct mmc_host *mmc,
>  		if (!(host->flags & SDHCI_SIGNALING_120))
>  			return -EINVAL;
>  		if (!IS_ERR(mmc->supply.vqmmc)) {
> -			ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000,
> -						    1300000);
> +			ret = mmc_regulator_set_vqmmc(mmc, ios);
>  			if (ret) {
>  				pr_warn("%s: Switching to 1.2V signalling voltage failed\n",
>  					mmc_hostname(mmc));
>