Improper TTBCR for arm 32bit kernel decompression

[sramana@codeaurora.org (Srinivas Ramana)]

On 09/09/2016 11:06 PM, Nicolas Pitre wrote:
> On Fri, 9 Sep 2016, Srinivas Ramana wrote:
>
>> Hello,
>>
>> While trying to boot arm-32 bit kernel, I came across a problem where TTBCR is
>> in improper state. If the bootloader uses the long descriptor format and jumps
>> to kernel decompressor code, TTBCR may not be in the right state. So, as soon
>> as the MMU is enabled, execution can not proceed further.
>>
>> Before enabling the MMU, it is required to clear the TTBCR.PD0 field to use
>> TTBR0 for translation table walks. Also, TTBCR.N should be reset to '0' to
>> indicate the correct base address width. The 'commit dbece45894d3a ("ARM:
>> 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores")' does the reset of
>> TTBCR.N, but doesn't consider all the bits for the size of TTBCR.N.
>>
>> when i tried the below change where i explicitly clear TTBCR.PD0 and use
>> correct mask for TTBCR.N, I see proper memory after MMU is enabled and
>> decompression succeeds.
>>
>> Request your comments on the change below. If it looks good, I can submit a
>> patch for inclusion.
>>
>> ---------------------8<----------------------------------
>> diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
>> index af11c2f..5769f1f 100644
>> --- a/arch/arm/boot/compressed/head.S
>> +++ b/arch/arm/boot/compressed/head.S
>> @@ -779,7 +779,8 @@ __armv7_mmu_cache_on:
>>                  orrne   r0, r0, #1              @ MMU enabled
>>                  movne   r1, #0xfffffffd         @ domain 0 = client
>>                  bic     r6, r6, #1 << 31        @ 32-bit translation system
>> -               bic     r6, r6, #3 << 0         @ use only ttbr0
>> +               bic     r6, r6, #7 << 0         @ width of base address field
>> +               bic     r6, r6, #1 << 4         @ use only ttbr0
>
> You could combine those instructions like this:
>
> 		bic	r6, r6, #(7 << 0) | (1 << 4) @ use only ttbr0
Sure, Thanks for the suggestion. I can incorporate this and submit a 
patch. Can i use your Acked-by?

Thanks,
-- Srinivas R

>
> Nicolas
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>


-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, 
Inc., is a member of Code Aurora Forum, a Linux Foundation Collaborative 
Project.